A Round Gauge kit for the Alfa Romeo GTV6 2.5 (Alfetta GTV6)
Built from the factory gauge sizes below: one digital gauge per hole.
Factory gauges
6 round instruments in the factory dash
| Instrument | Original size | How it works | Round Gauge |
|---|---|---|---|
| SpeedometerVeglia | Not published; measureMedium2 | Other | 100 mm To measureIn the binnacle directly ahead of the driver on the 1981 UK test car. Drive type not published in the sources reviewed. 100 mm is only a starting point to measure against. |
| Tachometer (electronic)Veglia | Not published; measureMedium12 | Electronic (voltage trigger) | 100 mm To measureAhead of the driver on the launch layout, in the centre binnacle on the 1981 UK car. The catalogue called it an electronic engine-speed indicator. |
| Fuel level | Not published; measureMedium2 | Other | 52 mm To measureIn the centre binnacle with the other secondary gauges. |
| Oil pressure | Not published; measureMedium2 | Other | 52 mm To measureThe 1981 test car read 55 psi (3.8 bar) on this gauge. |
| Temperature | Not published; measureMedium2 | Other | 52 mm To measure |
| Quartz clock (launch specification) | Not published; measureMedium2 | Clock | 100 mm To measureListed as one of three large dials in the catalogue. The 1981 UK test car had no analogue clock, only a digital clock in the radio. |
Electrical facts for a gauge swap
Earth polarity, stabiliser, senders and signal types.
The factory dash: history and variants
Alfa built the GTV6 2.5 from 1980 to 1987, about 22,400 cars in two runs.
It was sold in the US as the GTV-6 from 1981 to 1986, and South Africa assembled about 750 plus a 3.0-litre homologation special.Medium3
Alfa GTV6 gauges came with a dash redesign. Compared with the 2000 GTV, the separate speedometer and tachometer pods gave way to one panel ahead of the driver, and secondary gauges moved over the centre console.Medium1
Alfa's catalogue promised three large dials ahead of the driver: speedometer, electronic tachometer and quartz clock. That matches the launch description of the 2.5-litre V6 car.Medium21
The UK right-hand-drive car tested in 1981 differed. Only the Veglia speedometer sat ahead of the driver. A hooded centre binnacle held the tachometer, fuel, oil pressure and temperature gauges with four warning lights.Medium2
Check which layout your car has before planning a gauge set. Market, drive side and year all affect it.Medium21
How the original instruments work
The tachometer is electronic.
The engine is a 2.5-litre 60-degree V6 with Bosch L-Jetronic injection and an automatic rev limiter just over 6,100 rpm.Medium12
The 1981 tester found the centre gauges readable but prone to reflections in their glass. That matters when choosing a replacement face or display brightness.Medium2
What owners replace and why
RHD owners often want the tachometer ahead of the driver, as on the launch layout.
The split between the speedometer binnacle and the centre binnacle drew criticism in the 1981 road test.Low2
Going digital without losing the look
A digital gauge can show road speed from GPS and engine speed in one dial.
That helps RHD cars where the tach sits in the centre.Low2
The factory tach is already electronic, so its existing signal wire is the natural trigger point. Confirm the signal type with the gauge maker before connecting.Low2
Keep the Veglia dials and binnacles intact. Mount any new gauge in an existing opening so the car can return to stock.Low2
Common faults with the original gauges
1Centre gauges hard to read in sunlight
Usual causeReflections in the centre binnacle glass
FixClean the lenses and check the hood seals. A matte replacement face can reduce glare.Low2
Restoration tips
Frequently asked
Where is the tachometer on an Alfa GTV6?
It depends on the car. Alfa's launch layout put the speedometer, electronic tachometer and clock ahead of the driver. The 1981 UK right-hand-drive test car had only the speedometer there, with the tachometer in a hooded centre binnacle.Medium21
What gauges are in the GTV6 centre binnacle?
On the 1981 UK car, the centre binnacle held the tachometer, fuel, oil pressure and temperature gauges, plus four warning lights. On the launch layout, the secondary gauges and warning lights were grouped over the centre console.Medium21
Who made the GTV6 instruments?
Veglia. The 1981 Motor Sport road test names the Veglia speedometer in the binnacle ahead of the driver. Veglia Borletti supplied instruments to many Italian cars of the period.Medium2
Does the GTV6 have a clock?
Alfa's catalogue listed a quartz clock as one of three large dials ahead of the driver. The 1981 UK test car had no analogue clock, only a digital clock that lit when the radio was on. Check your car's spec.Medium2
Was the GTV6 built in South Africa?
Yes. The GTV6 2.5 arrived in South Africa in 1982, with the first 100 imported fully built. About 750 more were assembled locally until 1986. A 3.0-litre version with six Dell'Orto carburettors was built there for homologation.Medium3
Related cars
Sources
Numbered as cited above. Hover or tap a citation chip to preview it.
- Alfa Romeo GTV 6 2.5 iniezione (January 1981) · Motor Sport · press · retrieved 2026-11-04
- Alfa Romeo GTV 6 (September 1981 road test) · Motor Sport · press · retrieved 2026-11-04
- Alfa Romeo Alfetta · Wikipedia · reference · retrieved 2026-11-04
Markets: Italy, UK, Europe, USA, Australia, South Africa. Make and model names identify the vehicle only; GAINS is not affiliated with the vehicle or instrument makers.

