Firebird / Trans Am 4th gen: every channel it can give you
No public data maps this car's chassis channels yet. 11 more chassis and driver channels are on the car, waiting for GAINS discovery. Plus 25 Hz GPS and a motion sensor in the dongle itself.

Channels
Every channel the 4th gen is expected to give, by group. Filter by how it arrives.
Driver inputs
Wheels and chassis
Temperatures and pressures
Stability systems
Built into the dongle, on every car
How the data gets out
Where the 4th gen's sensors live and how GAINS reaches them.
Add sensors
This car has no data bus to discover. Standard OBD-II (where fitted) covers the engine; steering, brake pressure and wheel speeds need added sensors.
Telemetry Dongle Pro (engine data, GPS and motion) · sensor kit for chassis data (coming later)Discovery on your Firebird / Trans Am
The 11 channels marked “To discover” are learned once, from your car, then added for every 4th gen owner.
- Plug in and identify
The dongle finds the bus speed by listening only, reads the VIN and matches the car's data pattern to our database.
about 1 min - Guided steps, parked
The app walks you through each control for a few seconds: wheel lock to lock, brake light then firm, throttle (engine off), clutch, every gear, handbrake, stability-control button. The dongle records what changes on the car's data stream.
about 5 min - Module read
With the car parked, the dongle asks each module (ABS, gearbox, body) which values it can report. Read-only requests: nothing is written or changed.
about 5–10 min, automatic - Short drive
A normal drive with a few stops, steady speeds and turns. The dongle matches unknown values against its 25 Hz GPS and motion sensor to find wheel speeds, yaw rate and g-forces.
10–15 min - Results
Matched channels appear in the app. Anything that needs a closer look is checked by us and added later; you get a notification, and every owner of the same car gets the channel too.
most right after the drive
First time: about 25–30 minutes, once per car. Times are estimates until measured on real cars. Discovery only listens and reads: it never writes to the car, clears codes or bypasses security.
FAQ
Can I log steering angle and brake pressure on a Firebird / Trans Am 4th gen through the OBD-II port?
No steering-angle sensor is expected on this generation; GPS and the dongle's motion sensor still give speed, g-forces and yaw.
What OBD-II protocol does the Firebird / Trans Am 4th gen use?
Pre-OBD-II (1993–1995) · J1850 VPW (1996–2002).
How long does discovery take on a 4th gen?
The first time, about 25–30 minutes, once per car (estimate): guided steps while parked, a read-only module check and a short drive. After that the dongle recognises the car when you plug in.
Channel lists combine public vehicle data from the open-source community with the equipment this generation is known to carry. “Expected” and “To discover” channels are not yet confirmed by our own logs, and equipment varies by market, trim and year. Vehicle names identify the cars only; GAINS is not affiliated with Pontiac. Image: GAINS studio render. Specifications are pre-release and may change before launch.

