Subaru · 2015–2021

WRX / WRX STI VA: every channel it can give you

13 channels are already mapped from public vehicle data. 10 more chassis and driver channels are on the car, waiting for GAINS discovery. Plus 25 Hz GPS and a motion sensor in the dongle itself.

CAN (ISO 15765)Stability control: Standard (VDC)Manual / CVTFA20DIT 2.0T / EJ257 2.5T flat-4
27channels
13 Data stream
4 Standard OBD2
10 To discover
6 Built into the dongle
OBD-II portCAN (ISO 15765)Fast, data stream capable
Internal CAN busYesWhere the chassis modules talk
GatewayDiagnostics onlyBetween the car's bus and the port
Stability control · ABSStandard (VDC)ABS: Standard

Channels

Every channel the VA is expected to give, by group. Filter by how it arrives.

Driver inputs

Steering angle Data stream
Accelerator pedal Data stream
Throttle position Standard OBD2
Brake pressure Data stream
Brake pedal switch Data stream
Clutch pedal To discovermanual gearbox · if fitted
Gear To discovergearbox
Handbrake Data stream

Wheels and chassis

Wheel speed, front left Data stream
Wheel speed, front right Data stream
Wheel speed, rear left Data stream
Wheel speed, rear right Data stream
Vehicle speed Data stream
Yaw rate To discoverstability control (VDC)
Lateral g To discoverstability control (VDC)
Longitudinal g To discoverstability control (VDC) · if fitted

Engine

Engine RPM Data stream
Boost / manifold pressure Standard OBD2
Intake air temperature Standard OBD2
Fuel level Standard OBD2

Temperatures and pressures

Oil temperature Data stream
Oil pressure To discoverengine (if the car measures it) · if fitted
Coolant temperature Data stream
Gearbox temperature To discoverautomatic / dual-clutch gearbox · if fitted

Stability systems

ABS active To discoverABS
Traction control active To discoverstability control (VDC)
Stability control active To discoverstability control (VDC)

Built into the dongle, on every car

GPS speed and position 25 Hz
Lap, sector and delta times computed
Lateral and longitudinal g motion sensor
Yaw rate motion sensor
Heading and altitude GPS
Combined g (friction circle) computed

How the data gets out

Where the VA's sensors live and how GAINS reaches them.

Car's internal CAN busEngineVDCSteeringDashGatewayrequests onlyOBD-II · CANTelemetry Dongle Pro plugs into the OBD-II port

Read the car's modules

A gateway keeps the data stream off the OBD-II port. Discovery asks the ABS, steering and gearbox modules for their values with read-only requests. A CAN tap lead behind the gateway gets the full-rate stream.

Telemetry Dongle Pro (module reads) · CAN tap lead for full rate (accessory, coming later)

Discovery on your WRX / WRX STI

The 10 channels marked “To discover” are learned once, from your car, then added for every VA owner.

  1. Plug in and identify

    The dongle finds the bus speed by listening only, reads the VIN and matches the car's data pattern to our database.

    about 1 min
  2. Guided steps, parked

    The app walks you through each control for a few seconds: wheel lock to lock, brake light then firm, throttle (engine off), clutch, every gear, handbrake, stability-control button. The dongle records what changes on the car's data stream.

    about 5 min
  3. Module read

    With the car parked, the dongle asks each module (ABS, gearbox, body) which values it can report. Read-only requests: nothing is written or changed.

    about 5–10 min, automatic
  4. Short drive

    A normal drive with a few stops, steady speeds and turns. The dongle matches unknown values against its 25 Hz GPS and motion sensor to find wheel speeds, yaw rate and g-forces.

    10–15 min
  5. Results

    Matched channels appear in the app. Anything that needs a closer look is checked by us and added later; you get a notification, and every owner of the same car gets the channel too.

    most right after the drive

First time: about 25–30 minutes, once per car. Times are estimates until measured on real cars. Discovery only listens and reads: it never writes to the car, clears codes or bypasses security.

Published CAN IDs

Community definitions for the VA: expected values, not yet confirmed by our own logs.

Show 14 signals
ChannelCAN IDStart bit · lengthByte orderScale · offsetUnit
Steering angle0x27 · 16 (signed)Motorola (BE)0.1 · 0degree
Vehicle speed0xD10 · 16Intel (LE)0.05625 · 0KPH
Brake pressure0xD116 · 8Intel (LE)1 · 0raw
Wheel speed, front left0xD40 · 16Intel (LE)0.0592 · 0KPH
Wheel speed, front right0xD416 · 16Intel (LE)0.0592 · 0KPH
Wheel speed, rear left0xD432 · 16Intel (LE)0.0592 · 0KPH
Wheel speed, rear right0xD448 · 16Intel (LE)0.0592 · 0KPH
steering angle alt0xD00 · 16 (signed)Intel (LE)-0.1 · 0raw
Engine RPM0x14016 · 14Intel (LE)1 · 0raw
Accelerator pedal0x1400 · 8Intel (LE)0.392157 · 0raw
Brake pedal switch0x15252 · 1Intel (LE)1 · 0raw
Handbrake0x15251 · 1Intel (LE)1 · 0bool
Oil temperature0x36016 · 8Intel (LE)1 · -40raw
Coolant temperature0x36024 · 8Intel (LE)1 · -40raw

Full details and sources: Subaru WRX / WRX STI data by year.

FAQ

Can I log steering angle and brake pressure on a WRX / WRX STI VA through the OBD-II port?

Yes, expected on the data stream. A standard OBD2 scan tool won't show them because they aren't standard OBD2 values.

What OBD-II protocol does the WRX / WRX STI VA use?

CAN (ISO 15765). Its engine, stability and dash modules also share an internal CAN bus.

How long does discovery take on a VA?

The first time, about 25–30 minutes, once per car (estimate): guided steps while parked, a read-only module check and a short drive. After that the dongle recognises the car when you plug in.

Channel lists combine public vehicle data from the open-source community with the equipment this generation is known to carry. “Expected” and “To discover” channels are not yet confirmed by our own logs, and equipment varies by market, trim and year. Vehicle names identify the cars only; GAINS is not affiliated with Subaru. Specifications are pre-release and may change before launch.