Engine: B18C (GS-R / Type R)
Part of the Honda B-series family.
Modeled power and torque
Modelled estimate, not a dyno result.
Modeled estimate, not a dyno measurement. Real results vary with fuel, weather, dyno type and build.
Stock is anchored to the factory rating (170 hp at 7600 rpm, 128.3 lb-ft at 6200 rpm); the curve shape between peaks is modeled. Intake + exhaust + tune (pump fuel): Typical NA gains come mostly above mid-rpm.
B18C (GS-R / Type R) data
- Load sensing
- MAP speed-density
- O2 sensor
- narrowband (zirconia), heated on later PGM-FI; no wideband on this family per sources consulted
- Closed loop
- narrowband closed loop at idle/cruise, open loop cold start and WOT/high load
- Block
- aluminium (high-pressure die-cast)
- Rods / pistons
- 137.9 mm rods (Wikipedia) · Type R (B18C5): high-pressure die-cast aluminium pistons with moly-coated skirts per a syndicated magazine excerpt (search excerpt only; page 404 on fetch, unverified)
- Reported limit
- Not yet sourced
- Factory
- Honda top-feed (Keihin/Denso family; maker not confirmed)
- Impedance
- high (saturated)
- Direct-fit upgrades
- 6 maker-listed
- Knock
- Honda 30530-PV1-A01
- MAP / MAF
- Honda 37830-PAA-S00 (replaces 37830-P0G-S00)
- O2 (upstream)
- Honda 36531-P73-G01 (replaces 36531-P72-A02)
Platform background
The third-generation Integra (DC2 coupe, DB8 sedan) carried the 170 hp B18C1 in GS-R form and, from 1997, the hand-assembled 195 hp B18C5 Type R. The 1994-95 cars are OBD1 and 1996-2001 cars OBD2, and GS-R ECUs belong to the 37820-P72 part-number family. The DC2 also shares mount geometry with the EG Civic.
Factory ECU
Factory ECU: harness cross-reference
From the factory ECU each listed harness plugs into. The factory ECU is unplugged, not modified. Check the label and part number on your own ECU before ordering.
- ECU family
- Honda OBD2
- Applies to
- Label 1996-99, selector 1996-2001; manual
- Not for
- OBD2a vs OBD2b connector split around 1998-99 - confirm
Label (1996-99) and selector years (1996-2001) disagree; may straddle OBD2a/OBD2b. No numbers verified.
- ECU family
- Honda OBD2
- Applies to
- Label 2000-01, selector 1998-2002; manual; 37820-P2P-A12 = 1999-2000 Civic 4-door non-VTEC-E
Part numbers are examples for one Civic variant only (dealer catalogue snippet); Integra/Accord codes not verified.
Factory ECU pinout: pending
No OEM pin table is in our library yet for the B18C (GS-R / Type R) factory ECU. No OEM-grade ECM/PCM terminal table could be read for this guide (the factory manuals located online are image-only). Competitor plug-in manuals were not used, by policy. Needed: Acura Integra 1994-2001 Service Manual and Electrical Troubleshooting Manual, ECM/PCM connector terminal tables for OBD1 (1994-95) and OBD2 (1996-2001) separately. Until then, wire from the harness maker's instructions or the factory service manual.
Factory ECU pinout
No OEM-grade ECM/PCM terminal table could be read for this guide (the factory manuals located online are image-only). Competitor plug-in manuals were not used, by policy. Needed: Acura Integra 1994-2001 Service Manual and Electrical Troubleshooting Manual, ECM/PCM connector terminal tables for OBD1 (1994-95) and OBD2 (1996-2001) separately.
Plug-and-play harness
No Haltech S3 plug-in harness is listed for this vehicle, but a Boomslang adapter harness is: it plugs into the factory ECU connector on one side and the S3 pinout on the other, so the ECU2 replaces the factory ECU without cutting the loom. Nothing is written to the factory ECU. Pin-compatible per the published S3 pinout, not yet fit-tested.
| Maker | Harness | Fits | Link | |
|---|---|---|---|---|
![]() | Manual 1996 - 1999 Acura IntegraBF29004-S3 | Label 1996-99, selector 1996-2001; manual | $840Lowest | Maker ↗ |
![]() | Manual 2000 - 2001 Acura IntegraBF29005-S3 | Label 2000-01, selector 1998-2002; manual; 37820-P2P-A12 = 1999-2000 Civic 4-door non-VT… | $840Lowest | Maker ↗ |
| Wire-in | Universal flying lead or re-terminated factory harness | Any engine (terminate to ECU2's two Superseal 34 connectors) | Universal harness from $405 | Maker ↗ |

Boomslang plug-and-play harness for Haltech Nexus S3 - Manual 1996 - 1999 Acura Integra
- Plugs into
Honda OBD2a ECU (1996-98 Civic/Integra/Accord/Prelude)
- ECU
- Honda OBD2
- Confidence
- low
Label (1996-99) and selector years (1996-2001) disagree; may straddle OBD2a/OBD2b. No numbers verified.
- Fits
- Label 1996-99, selector 1996-2001; manual
- Exclusions
- OBD2a vs OBD2b connector split around 1998-99 - confirm
- SKU
- BF29004-S3
- Maker fitment
- Acura Integra; Honda Accord; Honda Civic; Honda Prelude (Manual); selector years 1996-2001; SKU label: Manual 1996 - 1999 Acura Integra
- Maker notes
- separate SKUs exist for other Nexus models (-S2/-R3/-R5/-T1/-T2); USDM selector

Boomslang plug-and-play harness for Haltech Nexus S3 - Manual 2000 - 2001 Acura Integra
- Plugs into
Honda OBD2b ECU (1999-2001 Civic/Integra/Accord) · 37820-P2P-A12, 37820-P2P-A11
- OEM part numbers
- 37820-P2P-A12, 37820-P2P-A11
- ECU
- Honda OBD2
- Confidence
- low
Part numbers are examples for one Civic variant only (dealer catalogue snippet); Integra/Accord codes not verified.
Sources: E-1461
- Fits
- Label 2000-01, selector 1998-2002; manual; 37820-P2P-A12 = 1999-2000 Civic 4-door non-VTEC-E
- SKU
- BF29005-S3
- Maker fitment
- Acura Integra; Honda Accord; Honda Civic (Manual); selector years 1998-2002; SKU label: Manual 2000 - 2001 Acura Integra
- Maker notes
- separate SKUs exist for other Nexus models (-S2/-R3/-R5/-T1/-T2); 2000-01
Haltech and Boomslang are trademarks of their respective owners. GAINS is not affiliated with or endorsed by them.
Your GAINS system for this car · pre-release
ECU2 for the Integra Type R DC2
Planned with the same rules as the configurator for this car's 4 cyl · port injection · cable throttle. The factory ECU is unplugged and replaced; nothing is written to it.

- Price TBA
ECU2Engine controller
4 cyl · port injection · cable throttle
Runs this 4-cylinder's injectors and its distributor on one ignition output, with the wideband built in.
in designEst. availability: April 2027
Add PDM2 to switch and protect chassis loads (pumps, fans, lights, accessories). Add it in the configurator →
Track days? Add the Telemetry Dongle Pro for 25 Hz GPS lap timing; it plugs into the OBD-II port, and your phone is the dash. Plan it in the configurator →
What you get
- A screen on the ECUA 2.4-inch, 500-nit display in the lid, readable in a footwell.
- Faults in plain words"Coolant temp sensor open circuit.
- S3-style harnessesConnector A and C pin functions follow the published Nexus S3 wiring diagram.
- Powered CAN portA sealed 4-pin port on the insert carries 12 V and CAN for the PDM2 and GAINS displays: one cable per accessory.
- GAINS insideThe on-ECU adaptive layer, the app, logging and your limits.
How it wires in
- Haltech S3 plug-in harnessNone listed for this car
- Factory-connector → S3 adapter2 listed · from $840 USD listBF29004-S3
- Wire-inAlways possible
Pin-compatible per the published S3 pinout, not yet fit-tested. Every harness option for this car ↓
ECU2 is in design; specifications may change. All GAINS hardware is pre-release concept design; nothing is for sale yet and no application is validated on a vehicle. Harness fitment is from published pinouts and not yet fit-tested.
How GAINS approaches the Integra Type R DC2
Our starting method for this engine, as foundations first: get it running and drivable, then learn fuel, then the hardware-specific strategies. It is a methodology outline, not a validated calibration.
- 1Base map and first startplanned
Start from displacement, injector data and the sensors fitted, then let the first-start learner settle cranking, idle and warm-up before any load work. The goal is a safe, running engine, not a finished calibration.
- 2Lambda targets and VE learningclosed loop on GAINS ECUs
Air-fuel targets come from your goal (street, track, economy). The ECU then learns its fuel table cell by cell from the onboard wideband inside a signed envelope, and you approve promoting what it learned into the base map.
- 3VTEC crossoverplanned
VTEC engagement is treated as a load and rpm surface where the two cam profiles cross on torque, learned from logs rather than a single fixed rpm.
- 4Drivability foundationsplanned
Pedal map, tip-in and decel fuel, idle control, cold start and warm-up enrichment: the tables tuners spend hours on after the main map. Each is a strategy in the knowledge engine with its own limits.
- 5Factory load sensingfactory reference
What the factory ECU measures load with: MAP speed-density (medium confidence)
- 6Wideband sensorhardware
factory sensor type changes by year/market (narrowband on earlier cars); fit a Bosch LSU 4.9 for the GAINS ECU's built-in controller either way
Drivetrain
Hydraulic-clutch B-series manual transmissions (e.g. Y80 OBD1, S80 OBD2 listed for B18C variants)
Low confidence8Chassis integration
Tuning notes
B18C blocks are commonly re-sleeved for high power (e.g. to 84 mm)
Low confidence7Natural-aspiration gains come from intake, header, cam gears and moving the VTEC point to the torque-curve crossover. The Type R's 10.6:1 static compression leaves little knock margin for boost on pump fuel.
Popular swaps
GAINS on the Integra Type R DC2
ECU2
Designed so your phone is the laptop, keypad and dash
The GAINS app is designed to handle tuning, logging, gauges and switch inputs over Bluetooth, so the system needs no separate CAN keypad or display. Keypad, dash and logging views are planned; the iOS prototype runs on simulated data today.
Wideband, IMU and logging built in
An onboard Bosch LSU 4.9 wideband controller, a 6-axis IMU and onboard logging are designed into the ECU rather than sold as add-on modules.
Modular, so you buy what the engine needs
This engine runs on ECU2. PDM2 (power, body and gearbox) is optional and connects over ECU2's powered CAN port; the Telemetry Dongle Pro adds GPS lap timing from the OBD-II port.
Calibration that keeps learning
Instead of a fixed map that drifts as parts and conditions change, the ECU keeps adapting its fuel trims within limits you can see and approve in the app.
Adaptive tuning strategies
- VE learning closed loop on GAINS ECUs
Learns the fuel table from the onboard wideband as you drive, cell by cell, inside a signed authority envelope. Learned trims are promoted into the base map without a step in fuelling.
- Goal-based lambda targets closed loop on GAINS ECUs
Sets air-fuel targets from your goal (economy, response, power, safety margin) instead of a single fixed table.
- Knock protection protection
Listens for knock on a dedicated knock processor, pulls timing at once and restores it slowly. It only ever reduces advance.
- Warm-up, cranking, idle and transient fuel planned
The same learning approach applied to the tables tuners spend hours on after the main map is done.
- Spark advance and boost authority gated
Widening ignition advance or boost is never automatic. It stays an expert or dyno decision until validated knock detection exists for the engine family.
Already running another ECU? In advisor mode the same strategies read your logs and recommend exact table changes with the reasoning, which you apply in your ECU vendor's own software.
GAINS hardware is pre-release concept design. Simulated results only; nothing is validated on a vehicle yet.
Frequently asked
What is the difference between the GS-R and Type R engines?
Both are 1.8-litre B18C VTEC engines. The GS-R B18C1 makes 170 hp at 10.0:1; the Type R B18C5 is hand-assembled at 10.6:1 and makes 195 hp.28
When does VTEC engage on the B18C1?
Around 4400 rpm per published specs; the ECU also checks oil pressure, temperature and load.85
Is my Integra OBD1 or OBD2?
1994-95 Integras are OBD1 and 1996-2001 are OBD2.8
What ECU does the Integra GS-R use?
GS-R ECUs belong to the 37820-P72 part-number family. Check the suffix on the label to identify OBD generation and transmission.6
Can you K-swap a DC2 Integra?
Yes. Hasport's EGK kit lists 94-01 Integra.4
Sources
Numbered as cited above. Hover or tap a citation chip to preview it.
- Timing belts and interference engines · AA1Car Automotive Diagnostic Library (Larry Carley) · press · retrieved 2026-10-25
- Acura Integra Heritage and Milestones · Acura (acuranews.com) · press · retrieved 2026-10-25
- DCSTK B-Series Mount Kit (94-01 Integra) · Hasport Performance · vendor-doc · retrieved 2026-10-25
- EGK K-Series Mount Kit (92-95 Civic, 94-01 Integra, Del Sol) · Hasport Performance · vendor-doc · retrieved 2026-10-25
- Honda VTEC Oil Pressure Switch Tips · NAPA Know How · vendor-doc · retrieved 2026-10-25
- Used Acura Integra Engine Computers (part-number listings) · PartRequest · community · retrieved 2026-10-25
- Darton MID Sleeves B-Series listing · Speed Science (NZ) · vendor-doc · retrieved 2026-10-25
- Honda B engine · Wikipedia · community · retrieved 2026-10-25
Catalog data and evidence
- Catalog data, not yet expert-reviewed.
- No vehicle photos: illustrations only until licensed imagery is available.
- E-934 Boomslang identity (sourced, high confidence)
- E-935 Boomslang S3 catalog size (sourced, high confidence)
- E-900 Haltech Nexus S3 catalog (sourced, high confidence)
- E-941 S3 engine harness availability (inferred, medium confidence)
- E-1461 Honda OBD2 ECU (secondary-catalogue, medium confidence)



