Honda · 1992-01

Honda Prelude BB (4th / 5th gen) VTEC / Type SH (H22A) ECU and tuning guide

The Honda Prelude BB (4th / 5th gen) VTEC / Type SH (H22A) (1992-01) runs the H22A: 2.2 L I4, naturally aspirated, port injection, cable throttle.

Researched sections show a citation and confidence for every fact.

Honda Prelude BB (4th / 5th gen) VTEC / Type SH (H22A), side view
Studio render for illustration, not a photograph of a specific car.

Engine: H22A

Years1992-01
Displacement2.2L
LayoutI4
InductionNaturally aspirated
InjectionPort injection
Cam controlVTEC
IgnitionDistributor
Swap demandMedium

Part of the Honda H-series family.

Modeled power and torque

Modelled estimate, not a dyno result.

H22A: stock vs common buildsmodeled

Modeled estimate, not a dyno measurement. Real results vary with fuel, weather, dyno type and build.

Stock (factory-rated peaks; shape modeled)
01002003004000501001502002503001k2k3k4k5k6k7khplb-ftrpm
Solid = power (hp), dashed = torque (lb-ft). Shaded bands show the modeled uncertainty. Hover for values.

Stock is anchored to the factory rating (195 hp at 7000 rpm, 156 lb-ft at 5250 rpm); the curve shape between peaks is modeled. Intake + exhaust + tune (pump fuel): Typical NA gains come mostly above mid-rpm.

H22A data

Factory ECU

From the factory ECU each listed harness plugs into. The factory ECU is unplugged, not modified. Check the label and part number on your own ECU before ordering.

Honda OBD1 ECU (P28 / P30 / P72 / P05 etc.)Part numbers not yet sourced.
ECU family
Honda OBD1 37820-Pxx (1992-95)
Applies to
1992-95 Civic/Integra/Prelude, 1990-95 Accord; manual
Not for
automatic; OBD0 and OBD2 (1996+)

Honda part format 37820-<3-char engine code>-<rev>; code shown on ECU sticker (e.g. P28 = Civic EX/Si). Specific full part numbers not confirmed; A=US, J=Japan suffix convention per source.

Low confidenceUnverifiedE-1441
Honda OBD1 ECU (e.g. P28 / P30 / P72 / P75 class)Part numbers not yet sourced.
ECU family
Honda OBD1
Applies to
1992-95 Civic, Accord, Prelude; 1992-95 Integra (manual)
Not for
Not OBD2 (1996+); some Integra codes (P72/P75) exist in both OBD1 and OBD2 versions

One harness covers several OBD1 ECU part codes across Civic/Integra/Accord/Prelude; early 1992-93 Integra (DA) may be OBD0-style - verify. No OEM numbers verified from allowed sources.

Low confidenceUnverified
Honda OBD2a ECU (1996-98 Civic/Integra/Accord/Prelude)Part numbers not yet sourced.
ECU family
Honda OBD2
Applies to
Label 1996-99, selector 1996-2001; manual
Not for
OBD2a vs OBD2b connector split around 1998-99 - confirm

Label (1996-99) and selector years (1996-2001) disagree; may straddle OBD2a/OBD2b. No numbers verified.

Low confidenceUnverified

Factory ECU pinout: pending

No OEM pin table is in our library yet for the H22A factory ECU. We only publish pinouts drawn from the OEM service manual or the maker's own documents, and none has been sourced yet. Until then, wire from the harness maker's instructions or the factory service manual.

Plug-and-play harness

Route for this carS3 plug-in harness
1 · S3 plug-in2 · Factory-connector adapter3 · Wire-in

A plug-in harness built for the Haltech Nexus S3 pinout is listed for this vehicle. The ECU2 follows that published pinout, so the factory ECU is unplugged and the ECU2 plugs into the car's own loom. Nothing is written to the factory ECU. Pin-compatible per the published S3 pinout, not yet fit-tested.

MakerHarnessFitsLink
Nexus S2/S3 Plug n Play Adapter Harness Honda OBD-IHT-1863311992-95 Civic/Integra/Prelude, 1990-95 Accord; manual$495LowestMaker ↗
Manual 1992 - 1995 Acura IntegraBF29002-S31992-95 Civic, Accord, Prelude; 1992-95 Integra (manual)$840Maker ↗
Manual 1996 - 1999 Acura IntegraBF29004-S3Label 1996-99, selector 1996-2001; manual$840Maker ↗
Wire-inUniversal flying lead or re-terminated factory harnessAny engine (terminate to ECU2's two Superseal 34 connectors)Universal harness from $405Maker ↗

Nexus S2/S3 Plug n Play Adapter Harness Honda OBD-I

$495USD list · excl. tax · unconfirmed
Plug-and-playManual onlyOff-road / competition onlyhigh confidenceS3 fit not yet tested ⓘ
Plugs into
Honda OBD1 ECU (P28 / P30 / P72 / P05 etc.)
ECU
Honda OBD1 37820-Pxx (1992-95)
Confidence
low

Honda part format 37820-<3-char engine code>-<rev>; code shown on ECU sticker (e.g. P28 = Civic EX/Si). Specific full part numbers not confirmed; A=US, J=Japan suffix convention per source.

Sources: E-1441

Fits
1992-95 Civic/Integra/Prelude, 1990-95 Accord; manual
Exclusions
automatic; OBD0 and OBD2 (1996+)
SKU
HT-186331
Maker fitment
Honda OBD-I: 1992-95 Civic/Integra/Prelude and 1990-95 Accord; manual only
Maker notes
(search snippet); kit HT-213300

Boomslang plug-and-play harness for Haltech Nexus S3 - Manual 1992 - 1995 Acura Integra

$840USD list
Plug-and-playManual onlyhigh confidenceS3 fit not yet tested ⓘ
Plugs into
Honda OBD1 ECU (e.g. P28 / P30 / P72 / P75 class)
ECU
Honda OBD1
Confidence
low

One harness covers several OBD1 ECU part codes across Civic/Integra/Accord/Prelude; early 1992-93 Integra (DA) may be OBD0-style - verify. No OEM numbers verified from allowed sources.

Fits
1992-95 Civic, Accord, Prelude; 1992-95 Integra (manual)
Exclusions
Not OBD2 (1996+); some Integra codes (P72/P75) exist in both OBD1 and OBD2 versions
SKU
BF29002-S3
Maker fitment
Acura Integra; Honda Accord; Honda Civic; Honda Prelude (Manual); selector years 1992-1995; SKU label: Manual 1992 - 1995 Acura Integra
Maker notes
separate SKUs exist for other Nexus models (-S2/-R3/-R5/-T1/-T2); USDM selector

Boomslang plug-and-play harness for Haltech Nexus S3 - Manual 1996 - 1999 Acura Integra

$840USD list
Plug-and-playManual onlyhigh confidenceS3 fit not yet tested ⓘ
Plugs into
Honda OBD2a ECU (1996-98 Civic/Integra/Accord/Prelude)
ECU
Honda OBD2
Confidence
low

Label (1996-99) and selector years (1996-2001) disagree; may straddle OBD2a/OBD2b. No numbers verified.

Fits
Label 1996-99, selector 1996-2001; manual
Exclusions
OBD2a vs OBD2b connector split around 1998-99 - confirm
SKU
BF29004-S3
Maker fitment
Acura Integra; Honda Accord; Honda Civic; Honda Prelude (Manual); selector years 1996-2001; SKU label: Manual 1996 - 1999 Acura Integra
Maker notes
separate SKUs exist for other Nexus models (-S2/-R3/-R5/-T1/-T2); USDM selector

Haltech and Boomslang are trademarks of their respective owners. GAINS is not affiliated with or endorsed by them.

Your GAINS system for this car · pre-release

ECU2 for the Prelude BB (4th / 5th gen)

Planned with the same rules as the configurator for this car's 4 cyl · port injection · cable throttle. The factory ECU is unplugged and replaced; nothing is written to it.

Honda Prelude BB (4th / 5th gen) VTEC / Type SH (H22A) studio render
Prelude BB (4th / 5th gen)
  • ECU2Engine controller

    4 cyl · port injection · cable throttle

    Runs this 4-cylinder's injectors and its distributor on one ignition output, with the wideband built in.

    in designEst. availability: April 2027

    Price TBA

Add PDM2 to switch and protect chassis loads (pumps, fans, lights, accessories). Add it in the configurator →

Track days? Add the Telemetry Dongle Pro for 25 Hz GPS lap timing; it plugs into the OBD-II port, and your phone is the dash. Plan it in the configurator →

What you get

  • A screen on the ECUA 2.4-inch, 500-nit display in the lid, readable in a footwell.
  • Faults in plain words"Coolant temp sensor open circuit.
  • S3-style harnessesConnector A and C pin functions follow the published Nexus S3 wiring diagram.
  • Powered CAN portA sealed 4-pin port on the insert carries 12 V and CAN for the PDM2 and GAINS displays: one cable per accessory.
  • GAINS insideThe on-ECU adaptive layer, the app, logging and your limits.

How it wires in

  1. Haltech S3 plug-in harness1 listed · from $495 USD listHT-186331
  2. Factory-connector → S3 adapter2 listed · from $840 USD list
  3. Wire-inAlways possible

Pin-compatible per the published S3 pinout, not yet fit-tested. Every harness option for this car ↓

ECU2 is in design; specifications may change. All GAINS hardware is pre-release concept design; nothing is for sale yet and no application is validated on a vehicle. Harness fitment is from published pinouts and not yet fit-tested.

How GAINS approaches the Prelude BB (4th / 5th gen)

Our starting method for this engine, as foundations first: get it running and drivable, then learn fuel, then the hardware-specific strategies. It is a methodology outline, not a validated calibration.

  1. 1
    Base map and first startplanned

    Start from displacement, injector data and the sensors fitted, then let the first-start learner settle cranking, idle and warm-up before any load work. The goal is a safe, running engine, not a finished calibration.

  2. 2
    Lambda targets and VE learningclosed loop on GAINS ECUs

    Air-fuel targets come from your goal (street, track, economy). The ECU then learns its fuel table cell by cell from the onboard wideband inside a signed envelope, and you approve promoting what it learned into the base map.

  3. 3
    VTEC crossoverplanned

    VTEC engagement is treated as a load and rpm surface where the two cam profiles cross on torque, learned from logs rather than a single fixed rpm.

  4. 4
    Drivability foundationsplanned

    Pedal map, tip-in and decel fuel, idle control, cold start and warm-up enrichment: the tables tuners spend hours on after the main map. Each is a strategy in the knowledge engine with its own limits.

  5. 5
    Factory load sensingfactory reference

    What the factory ECU measures load with: MAP speed-density (low confidence)

  6. 6
    Wideband sensorhardware

    factory sensor type changes by year/market (narrowband on earlier cars); fit a Bosch LSU 4.9 for the GAINS ECU's built-in controller either way

GAINS on the Prelude BB (4th / 5th gen)

ECU2

ECU2Runs this 4-cylinder's injectors and its distributor on one ignition output, with the wideband built in.Est. availability: April 2027
Hardware fromPrice TBAPlan and compare costs

Designed so your phone is the laptop, keypad and dash

The GAINS app is designed to handle tuning, logging, gauges and switch inputs over Bluetooth, so the system needs no separate CAN keypad or display. Keypad, dash and logging views are planned; the iOS prototype runs on simulated data today.

Wideband, IMU and logging built in

An onboard Bosch LSU 4.9 wideband controller, a 6-axis IMU and onboard logging are designed into the ECU rather than sold as add-on modules.

Modular, so you buy what the engine needs

This engine runs on ECU2. PDM2 (power, body and gearbox) is optional and connects over ECU2's powered CAN port; the Telemetry Dongle Pro adds GPS lap timing from the OBD-II port.

Calibration that keeps learning

Instead of a fixed map that drifts as parts and conditions change, the ECU keeps adapting its fuel trims within limits you can see and approve in the app.

Adaptive tuning strategies

  • VE learning closed loop on GAINS ECUs

    Learns the fuel table from the onboard wideband as you drive, cell by cell, inside a signed authority envelope. Learned trims are promoted into the base map without a step in fuelling.

  • Goal-based lambda targets closed loop on GAINS ECUs

    Sets air-fuel targets from your goal (economy, response, power, safety margin) instead of a single fixed table.

  • Knock protection protection

    Listens for knock on a dedicated knock processor, pulls timing at once and restores it slowly. It only ever reduces advance.

  • Warm-up, cranking, idle and transient fuel planned

    The same learning approach applied to the tables tuners spend hours on after the main map is done.

  • Spark advance and boost authority gated

    Widening ignition advance or boost is never automatic. It stays an expert or dyno decision until validated knock detection exists for the engine family.

Already running another ECU? In advisor mode the same strategies read your logs and recommend exact table changes with the reasoning, which you apply in your ECU vendor's own software.

GAINS hardware is pre-release concept design. Simulated results only; nothing is validated on a vehicle yet.

Catalog data and evidence

  • Catalog data, not yet expert-reviewed.
  • No vehicle photos: illustrations only until licensed imagery is available.
  1. E-911 Haltech S3 adapter harness page (sourced, high confidence)
  2. E-934 Boomslang identity (sourced, high confidence)
  3. E-935 Boomslang S3 catalog size (sourced, high confidence)
  4. E-900 Haltech Nexus S3 catalog (sourced, high confidence)
  5. E-941 S3 engine harness availability (inferred, medium confidence)
  6. E-1441 Honda OBD1 ECU codes (reported, low confidence)