Part of the Subaru EJ family.
Modeled power and torque
Modelled estimate, not a dyno result.
Modeled estimate, not a dyno measurement. Real results vary with fuel, weather, dyno type and build.
Stock is anchored to the factory rating (227 hp at 6000 rpm, 217 lb-ft at 4000 rpm); the curve shape between peaks is modeled. Bolt-ons + tune (pump fuel, more boost): Stock turbo/supercharger; gains limited by compressor and fuel system.
EJ20 / EJ205 / EJ207 (WRX / STI JDM) data
- Load sensing
- MAF (hot-wire / hot-film)
- O2 sensor
- varies: wideband A/F listed for US 2002 WRX EJ205; JDM narrowband/A/F split not sourced
- Closed loop
- Not yet sourced
- Block
- aluminium
- Rods / pistons
- 130.43 mm length (Wikipedia table) · OEM hypereutectic (MotoIQ, EJ205)
- Reported limit
- Not yet sourced
- Factory
- Top-feed (USDM WRX EJ205 02-05); JDM EJ207 variants include side-feed (not confirmed)
- Impedance
- high (saturated)
- Direct-fit upgrades
- 5 maker-listed
- Knock
- 22060AA100
- MAP / MAF
- absolute pressure sensor
- O2 (upstream)
- 22641AA042|22641AA090
Platform background
The first-generation Impreza (GC saloon, GF wagon) carried the EJ20G and later EJ20K and EJ207 turbo engines in WRX and WRX STi form outside North America. US buyers got NA EJ22 and EJ25 Imprezas (L, Outback Sport, 2.5RS). The turbo engines used wasted-spark coil packs on the intake manifold (EJ20K/EJ207) or coil-on-plug on some EJ20G sub-types, top-feed injectors on the V7 STi, and no AVCS. Factory documentation for the GC8 ECU was not available in acceptable form, so this page is thin on ECU wiring.
Factory ECU
- EJ20G (to 1996), EJ20K (1996-98), EJ207 (9/98-8/99 STi, JP/UK/AU), EJ205 (WRX 1998-2000, AU)
- NA EJ22/EJ25 in US
- EJ20K: wasted-spark coil in the middle of the intake manifold
- EJ207: wasted-spark pack off-centre on the manifold
Single-scroll VF30 turbo, AVCS listed by Wikipedia, cable throttle, top-feed injectors, 8,000 rpm limit
AustralianCar.Reviews states AVCS arrived on the EJ207 with the GD; treat GC8 AVCS claims with caution.Low confidence3GC8 engine management varies by market and version (STi versions I-VI), so confirm the exact ECU and harness by part number before planning a conversion. Late EJ207 cars use the 'top-feed injector, wasted-spark, cable throttle' architecture, which suits most aftermarket ECUs.
Factory ECU: harness cross-reference
From the factory ECU each listed harness plugs into. The factory ECU is unplugged, not modified. Check the label and part number on your own ECU before ordering.
- ECU family
- Subaru 22611-series
- Applies to
- MY99-00 WRX; ADM and JDM; manual
- Not for
- USDM; automatic
Unresolved: no source found for MY99-00 ECU part numbers.
- ECU family
- Subaru GC8 Impreza STI ECM (V1/V2, JDM)
- Applies to
- 1994-1996 JDM Impreza WRX STI Ver I/II, manual
22611AA810 seen in a resale listing for GC8 STI EJ20 without year; not recorded as evidence. Treat as unverified.
- ECU family
- Subaru GC8 Impreza STI ECM (V3/V4, JDM)
- Applies to
- 1997-1998 JDM STI Ver III/IV, manual; non-immobiliser
- Not for
- immobiliser cars use BF29241-S3
No OEM number found.
- ECU family
- Subaru GC8 Impreza STI ECM (V3/V4, JDM, immobiliser)
- Applies to
- 1997-1998 JDM STI Ver III/IV with immobiliser, manual
- Not for
- non-immobiliser cars use BF29240-S3
No OEM number found.
Factory ECU pinout: pending
No OEM pin table is in our library yet for the EJ20 / EJ205 / EJ207 (WRX / STI JDM) factory ECU. No OEM-grade source found. Required: Subaru Impreza (GC/GF) service manual for the specific model year and market, Engine Section 'Engine Control Module I/O signal' table with connector numbering (and the matching wiring diagram book for wire colours). JDM STi versions differ from UK/AU WRX. Until then, wire from the harness maker's instructions or the factory service manual.
Factory ECU pinout
No OEM-grade source found. Required: Subaru Impreza (GC/GF) service manual for the specific model year and market, Engine Section 'Engine Control Module I/O signal' table with connector numbering (and the matching wiring diagram book for wire colours). JDM STi versions differ from UK/AU WRX.
Plug-and-play harness
A plug-in harness built for the Haltech Nexus S3 pinout is listed for this vehicle. The ECU2 follows that published pinout, so the factory ECU is unplugged and the ECU2 plugs into the car's own loom. Nothing is written to the factory ECU. Pin-compatible per the published S3 pinout, not yet fit-tested.
| Maker | Harness | Fits | Link | |
|---|---|---|---|---|
| Nexus S2/S3 Plug n Play Adapter Harness Subaru WRX MY99-00HT-186335 | MY99-00 WRX; ADM and JDM; manual | $495Lowest | Maker ↗ | |
![]() | Manual 1994 - 1996 Subaru STI V1/V2BF29239-S3 | 1994-1996 JDM Impreza WRX STI Ver I/II, manual | $840 | Maker ↗ |
![]() | Manual 1997 - 1998 Subaru STI V3/V4BF29240-S3 | 1997-1998 JDM STI Ver III/IV, manual; non-immobiliser | $840 | Maker ↗ |
![]() | Manual 1997 - 1998 Subaru STI V3/V4 IMMOBF29241-S3 | 1997-1998 JDM STI Ver III/IV with immobiliser, manual | $840 | Maker ↗ |
| Wire-in | Universal flying lead or re-terminated factory harness | Any engine (terminate to ECU2's two Superseal 34 connectors) | Universal harness from $405 | Maker ↗ |
Nexus S2/S3 Plug n Play Adapter Harness Subaru WRX MY99-00
- Plugs into
Subaru EJ20 ECU (MY99-00 GC8 WRX)
- ECU
- Subaru 22611-series
- Confidence
- low
Unresolved: no source found for MY99-00 ECU part numbers.
- Fits
- MY99-00 WRX; ADM and JDM; manual
- Exclusions
- USDM; automatic
- SKU
- HT-186335
- Maker fitment
- Subaru WRX MY99-00, Australian-delivered and JDM; manual only
- Maker notes
- (search snippet); MY99-00 ADM/JDM only

Boomslang plug-and-play harness for Haltech Nexus S3 - Manual 1994 - 1996 Subaru STI V1/V2
- Plugs into
Subaru ECM (EJ20G, JDM Impreza WRX STI Version I/II, GC8) · 22611AA810
- OEM part numbers
- 22611AA810
- ECU
- Subaru GC8 Impreza STI ECM (V1/V2, JDM)
- Confidence
- low
22611AA810 seen in a resale listing for GC8 STI EJ20 without year; not recorded as evidence. Treat as unverified.
- Fits
- 1994-1996 JDM Impreza WRX STI Ver I/II, manual
- SKU
- BF29239-S3
- Maker fitment
- Subaru STI V1/V2 (Manual); selector years 1994-1996; SKU label: Manual 1994 - 1996 Subaru STI V1/V2
- Maker notes
- separate SKUs exist for other Nexus models (-S2/-R3/-R5/-T1/-T2); STI V1/V2 1994-96 (JDM)

Boomslang plug-and-play harness for Haltech Nexus S3 - Manual 1997 - 1998 Subaru STI V3/V4
- Plugs into
Subaru ECM (EJ20G/K, JDM Impreza WRX STI Version III/IV, GC8)
- ECU
- Subaru GC8 Impreza STI ECM (V3/V4, JDM)
- Confidence
- low
No OEM number found.
- Fits
- 1997-1998 JDM STI Ver III/IV, manual; non-immobiliser
- Exclusions
- immobiliser cars use BF29241-S3
- SKU
- BF29240-S3
- Maker fitment
- Subaru STI V3/V4 (Manual); selector years 1997-1998; SKU label: Manual 1997 - 1998 Subaru STI V3/V4
- Maker notes
- separate SKUs exist for other Nexus models (-S2/-R3/-R5/-T1/-T2); STI V3/V4 1997-98

Boomslang plug-and-play harness for Haltech Nexus S3 - Manual 1997 - 1998 Subaru STI V3/V4 IMMO
- Plugs into
Subaru ECM (JDM Impreza WRX STI Version III/IV with immobiliser)
- ECU
- Subaru GC8 Impreza STI ECM (V3/V4, JDM, immobiliser)
- Confidence
- low
No OEM number found.
- Fits
- 1997-1998 JDM STI Ver III/IV with immobiliser, manual
- Exclusions
- non-immobiliser cars use BF29240-S3
- SKU
- BF29241-S3
- Maker fitment
- Subaru STI V3/V4 IMMO (Manual); selector years 1997-1998; SKU label: Manual 1997 - 1998 Subaru STI V3/V4 IMMO
- Maker notes
- separate SKUs exist for other Nexus models (-S2/-R3/-R5/-T1/-T2); STI V3/V4 immobiliser
Haltech and Boomslang are trademarks of their respective owners. GAINS is not affiliated with or endorsed by them.
Your GAINS system for this car · pre-release
ECU2 for the Impreza WRX / STI GC8
Planned with the same rules as the configurator for this car's 4 cyl · port injection · cable throttle. The factory ECU is unplugged and replaced; nothing is written to it.
- Price TBA
ECU2Engine controller
4 cyl · port injection · cable throttle
Full sequential fuel and spark for this 4-cylinder on a cable throttle, with the wideband built in.
in designEst. availability: April 2027
Add PDM2 to switch and protect chassis loads (pumps, fans, lights, accessories). Add it in the configurator →
Track days? Add the Telemetry Dongle Pro for 25 Hz GPS lap timing; it plugs into the OBD-II port, and your phone is the dash. Plan it in the configurator →
What you get
- A screen on the ECUA 2.4-inch, 500-nit display in the lid, readable in a footwell.
- Faults in plain words"Coolant temp sensor open circuit.
- S3-style harnessesConnector A and C pin functions follow the published Nexus S3 wiring diagram.
- Powered CAN portA sealed 4-pin port on the insert carries 12 V and CAN for the PDM2 and GAINS displays: one cable per accessory.
- GAINS insideThe on-ECU adaptive layer, the app, logging and your limits.
How it wires in
- Haltech S3 plug-in harness1 listed · from $495 USD listHT-186335
- Factory-connector → S3 adapter3 listed · from $840 USD list
- Wire-inAlways possible
Pin-compatible per the published S3 pinout, not yet fit-tested. Every harness option for this car ↓
ECU2 is in design; specifications may change. All GAINS hardware is pre-release concept design; nothing is for sale yet and no application is validated on a vehicle. Harness fitment is from published pinouts and not yet fit-tested.
How GAINS approaches the Impreza WRX / STI GC8
Our starting method for this engine, as foundations first: get it running and drivable, then learn fuel, then the hardware-specific strategies. It is a methodology outline, not a validated calibration.
- 1Base map and first startplanned
Start from displacement, injector data and the sensors fitted, then let the first-start learner settle cranking, idle and warm-up before any load work. The goal is a safe, running engine, not a finished calibration.
- 2Lambda targets and VE learningclosed loop on GAINS ECUs
Air-fuel targets come from your goal (street, track, economy). The ECU then learns its fuel table cell by cell from the onboard wideband inside a signed envelope, and you approve promoting what it learned into the base map.
- 3Cam phasing (VVT)gated
Begin with conservative overlap. Cam targets per load cell are then chosen with torque and knock in mind, keeping idle and cold overlap low for stability. Widening cam authority follows the same evidence-gated path as spark.
- 4Boost controlgated
A closed-loop boost target by gear and goal, held inside the authority envelope, with knock protection active at boost. Raising boost authority is never automatic; it stays an expert or dyno decision.
- 5Drivability foundationsplanned
Pedal map, tip-in and decel fuel, idle control, cold start and warm-up enrichment: the tables tuners spend hours on after the main map. Each is a strategy in the knowledge engine with its own limits.
- 6Factory load sensingfactory reference
What the factory ECU measures load with: MAF (hot-wire / hot-film) (low confidence)
- 7Wideband sensorhardware
factory sensor type changes by year/market (narrowband on earlier cars); fit a Bosch LSU 4.9 for the GAINS ECU's built-in controller either way
- 8Bottom end and head sealingfactory reference
Reported: Per MotoIQ, free-standing open-deck cylinders flex and lose head seal under boost, and OEM hypereutectic pistons fail easily. (medium confidence) Limits depend on tune quality, fuel, rpm and condition and are not guaranteed.
Drivetrain
Chassis integration
Tuning notes
- EJ207, 206 kW at 6,500 rpm, 353 Nm at 4,000 rpm
- Roller-bearing turbo understood to be IHI VF28, about 1.1 bar
Open-deck GC engines are generally treated as less tolerant of very high cylinder pressure than the later semi-closed-deck blocks. Knock monitoring and conservative timing at peak torque are especially important on high-boost GC builds.
Popular swaps
- Later EJ205/EJ207/EJ257 engines into GC8 shells
- Match ECU, trigger and throttle type to the donor engine
GAINS on the Impreza WRX / STI GC8
ECU2
Designed so your phone is the laptop, keypad and dash
The GAINS app is designed to handle tuning, logging, gauges and switch inputs over Bluetooth, so the system needs no separate CAN keypad or display. Keypad, dash and logging views are planned; the iOS prototype runs on simulated data today.
Wideband, IMU and logging built in
An onboard Bosch LSU 4.9 wideband controller, a 6-axis IMU and onboard logging are designed into the ECU rather than sold as add-on modules.
Modular, so you buy what the engine needs
This engine runs on ECU2. PDM2 (power, body and gearbox) is optional and connects over ECU2's powered CAN port; the Telemetry Dongle Pro adds GPS lap timing from the OBD-II port.
Calibration that keeps learning
Instead of a fixed map that drifts as parts and conditions change, the ECU keeps adapting its fuel trims within limits you can see and approve in the app.
Adaptive tuning strategies
- VE learning closed loop on GAINS ECUs
Learns the fuel table from the onboard wideband as you drive, cell by cell, inside a signed authority envelope. Learned trims are promoted into the base map without a step in fuelling.
- Goal-based lambda targets closed loop on GAINS ECUs
Sets air-fuel targets from your goal (economy, response, power, safety margin) instead of a single fixed table.
- Knock protection protection
Listens for knock on a dedicated knock processor, pulls timing at once and restores it slowly. It only ever reduces advance.
- Warm-up, cranking, idle and transient fuel planned
The same learning approach applied to the tables tuners spend hours on after the main map is done.
- Spark advance and boost authority gated
Widening ignition advance or boost is never automatic. It stays an expert or dyno decision until validated knock detection exists for the engine family.
Already running another ECU? In advisor mode the same strategies read your logs and recommend exact table changes with the reasoning, which you apply in your ECU vendor's own software.
GAINS hardware is pre-release concept design. Simulated results only; nothing is validated on a vehicle yet.
Frequently asked
Does the GC8 STi have AVCS?
Sources disagree. AustralianCar.Reviews lists AVCS on the EJ207 only from the GD, while Wikipedia lists AVCS for the V7 (late GC8) EJ207. Check the cam sprockets on the actual engine.23
What engine is in a GC8 WRX?
Depending on market and year: EJ20G (to 1996), EJ20K (1996-98 JDM), EJ205 (AU WRX from 1998) or EJ207 (late STi). US-market GC Imprezas were NA (EJ22/EJ25).31
What ignition does the GC8 EJ20 use?
EJ20K and EJ207 use wasted-spark coil packs on the intake manifold; some EJ20G sub-types used coil-on-plug.3
Sources
Numbered as cited above. Hover or tap a citation chip to preview it.
- Subaru EJ205 Engine · AustralianCar.Reviews · press · retrieved 2026-10-25
- Subaru EJ207 Engine · AustralianCar.Reviews · press · retrieved 2026-10-25
- Subaru EJ engine · Wikipedia · community · retrieved 2026-10-25
- Subaru WRX · Wikipedia · community · retrieved 2026-10-25
Catalog data and evidence
- Catalog data, not yet expert-reviewed.
- No vehicle photos: illustrations only until licensed imagery is available.
- E-915 Haltech S3 adapter harness page (sourced, high confidence)
- E-934 Boomslang identity (sourced, high confidence)
- E-935 Boomslang S3 catalog size (sourced, high confidence)
- E-900 Haltech Nexus S3 catalog (sourced, high confidence)
- E-941 S3 engine harness availability (inferred, medium confidence)


