With ECU2
ECU2 cuts ignition (and fuel) for each upshift and blips the throttle on downshifts, timed per gear over the GAINS CAN link.
GAINS PDM2 · Gearboxes · Sequential gearboxes
Quaife, Holinger, Sadev, Samsonas, Albins and others · SequentialPaddle shift for any sequential, with one gearbox-agnostic controller. ECU2 does the cut and blip; PDM2 runs the actuator and reads the barrel.
Dedicated race and rally gearboxes.
| Any engine ECU2 runs | time attack, rally and circuit cars |
|---|
Swap guides that use the Sequential gearboxes:
PDM2 drives the shift, pressure and converter solenoids itself and reads the speed sensors, range switch and fluid temperature.
ECU2 cuts ignition (and fuel) for each upshift and blips the throttle on downshifts, timed per gear over the GAINS CAN link.
It is planned (v1 target). PDM2 drives the shift, pressure and converter solenoids itself and reads the speed sensors, range switch and fluid temperature. Nothing is supported until bench and vehicle logs and an engineering review are done.
Any engine ECU2 runs: time attack, rally and circuit cars.
No separate controller box is planned: PDM2 handles the gearbox and ECU2 runs the engine. ECU2 cuts ignition (and fuel) for each upshift and blips the throttle on downshifts, timed per gear over the GAINS CAN link.
Planned capability, not a supported product. Shift control acts on engine output and is released only after bench and vehicle logs and a qualified engineering review. Quaife, Holinger, Sadev, Samsonas, Albins and others and other names identify compatible equipment only; GAINS is not affiliated with their makers.
Join the waitlist