Sim Wheel AdapterWheel indexGT2

Cammus GT2, front view
Maker's photo, logos removed.
Cammus

GT2

The Cammus GT2 is a 300 mm GT wheel with 10 buttons, 4 encoders, 1 funky switch, a small integrated numeric display and aluminium back. It connects over USB on the rim, which is what the GAINS Sim Wheel Adapter reads.

€329One detail to confirm
  • GT
  • Aluminium back
  • 70 mm via QR adapter
  • USB on the rim
Controls

What's on the wheel.

Counts as the maker and its retailers list them. A dash means no source states it.

Provisional. Sources disagree on this wheel, or only one source lists it. Treat these counts as a guide and check the maker's current listing.

10Buttons
4Rotary encoders
1Funky / joystick
2Rotary switches
—Toggles
2Paddlesshift

How we counted. Maker states '10 RGB Backlit Buttons & Multi-Function Encoders' without giving counts. The encoder, rotary-switch and joystick counts come from a retailer (ArchWizard): two 12-step rotary switches, four rotary knobs, one D-pad and one joystick. SimRacerZone's listing (4 buttons, 2 rotaries, 3-position switches, 1,320 mm diameter) contradicts both sources and appears to describe something else or to be wrong.

Specifications

The numbers.

Size300 mm
Weight1.50 kg
ScreenSmall integrated numeric display ('integrated speedometer' per ArchWizard; visible in maker photos; size and resolution not stated)
Rev lightsShift-indicator LEDs plus TC/ABS status LEDs (retailer); count not stated
Shift paddlesMagnetic, carbon fibre (maker)
Clutch paddlesTo confirm
Other paddlesTo confirm
ConnectionBox includes a data cable and a 'CAMMUS USB Dongle' (maker). A retailer says a rear USB-C port allows firmware updates and use on other makers' bases, but the maker lists compatibility only with CAMMUS DDWB and LP bases.
MaterialsReal carbon fibre construction, CNC aluminium spokes, steel shaft (maker)
GripsLeather, 12 o'clock marker
Mounting70 mm 'Motorsport Quick Release' (maker)
SoftwareCammus software for UI and customisation (retailer); maker page names no app
PriceUS$299 on cammusracing.com (2026-11); ~EUR 370-389 at EU retailers
On the adapter

How it fits.

Mount70 mm via QR adapter

Mounts through the maker's own quick-release part; a 70 mm wheel-side plate is needed.

RearAluminium back

A metal back carries the rim's load.

USBOn the rim

USB on the rim itself: one cable from the wheel to the adapter.

StatusOne detail open

USB-C on the rim; base-free use to bench-test.

Things to know

Before you buy.

  1. 01

    Cammus sells a 'New Upgrade' GT2 (green 12 o'clock marker, 2026 photos), and an earlier GT2 (orange marker) still appears at retailers. Retailer specs may describe the older one.

  2. 02

    The maker lists compatibility only with CAMMUS DDWB and LP bases. USB-C use on third-party bases is a retailer claim, not confirmed by the maker.

  3. 03

    Weight is listed as about 1.5 kg by the maker and 3.7 kg by one retailer (ArchWizard). The maker figure is used here.

  4. 04

    The maker's spec text has no clutch paddle. Only magnetic carbon shift paddles are listed.

Not tested yet

We haven't run the Cammus GT2 on the adapter yet. Before we call any rim supported, we check a real unit: every control seen over USB, with no maker software running. Sim rims are built for a desk rig, are not crash-rated and have no airbag; the adapter carries controls only, for motorsport and off-road use where your series rules and scrutineer approve it.

Sources

Specs from the maker and its retailers, checked November 2026. Makers change specs and prices; check theirs before you buy.

Run a GT2?

Tell us on the waitlist. The most-requested wheels go on the bench first.

Join the waitlist