Sim Wheel AdapterWheel indexKS

MOZA KS, front view
Maker's photo, logos removed.
MOZA

KS

The MOZA KS is a 300 mm GT wheel with 10 buttons, 3 encoders, 4 funky switches and carbon back. It connects over USB through the maker's hub, which is what the GAINS Sim Wheel Adapter reads.

≈ $240 + hubOne detail to confirm
  • GT
  • Carbon back
  • 70 mm via QR adapter
  • Maker's USB hub
Controls

What's on the wheel.

Counts as the maker and its retailers list them. A dash means no source states it.

10Buttons
3Rotary encoders
4Funky / joystick
—Rotary switches
—Toggles
4Paddlesshift · clutch

How we counted. Maker states 70 programmable input signals. The spec lists 10 RGB short-travel (0.25 mm) buttons, 3 rotary encoders (listed as '12-position'), 2 thumb encoders (20-position) and 2 depressible joysticks (funky = 2 thumb + 2 joysticks).

Specifications

The numbers.

Size300 mm
Weight2.60 kg
ScreenNone
Rev lights10 high-brightness RGB LEDs (8 colours), adjustable in Pit House
Shift paddles2 x magnetic, non-contact hall sensor, anodised aluminium
Clutch paddles2 x hall sensor (modes: combined axis / independent axis / button)
Other paddlesTo confirm
ConnectionIndustrial conductive slip ring to MOZA bases (non-wireless bases). On third-party bases it connects by USB to PC via the MOZA Universal Hub Kit.
MaterialsCarbon-fibre-reinforced composite, reinforced with high-strength steel at the connection
GripsTPE rubber with finger indentations
MountingMOZA quick release. Third-party bases need the MOZA Universal Hub Kit adapter.
SoftwareMOZA Pit House (clutch modes, button colours, LEDs, mapping)
PriceUS$229 sale (regular US$279) on mozaracing.com, 2026-11
On the adapter

How it fits.

Mount70 mm via QR adapter

Mounts through the maker's own quick-release part; a 70 mm wheel-side plate is needed.

RearCarbon back

A structural carbon back carries the rim's load.

USBMaker's hub

USB through the maker's own hub or link, which sits between the rim and the adapter.

StatusOne detail open

Carbon-reinforced composite body: strength to check. Through the Universal Hub.

Things to know

Before you buy.

  1. 01

    MOZA Universal Hub Kit (US$39 on mozaracing.com) lets the KS run over USB on a PC without a MOZA base. It includes a mount adapter for third-party bases (three 50 mm and six 70 mm hole patterns), an extension hub with 3 device ports and 1 pedal port, and USB-B and USB-C cables.

  2. 02

    At 2.6 kg (maker figure) it is heavy for a 300 mm rim.

  3. 03

    MOZA says the KS works with all non-wireless MOZA bases through the quick release.

  4. 04

    No screen. Telemetry is shown through the 10 RPM LEDs only.

Not tested yet

We haven't run the MOZA KS on the adapter yet. Before we call any rim supported, we check a real unit: every control seen over USB, with no maker software running. Sim rims are built for a desk rig, are not crash-rated and have no airbag; the adapter carries controls only, for motorsport and off-road use where your series rules and scrutineer approve it.

Sources

Specs from the maker and its retailers, checked November 2026. Makers change specs and prices; check theirs before you buy.

Run a KS?

Tell us on the waitlist. The most-requested wheels go on the bench first.

Join the waitlist