Sim Wheel AdapterWheel indexVantage GTE

Photo to come
We haven't found a maker photo of this wheel yet.
Turn Racing

Vantage GTE

The Turn Racing Vantage GTE is a GT wheel with 12 buttons, 5 encoders and carbon back. It connects over USB on the rim, which is what the GAINS Sim Wheel Adapter reads.

$1,200Sold as a USB rim · bench test due
  • GT
  • Carbon back
  • 3 × 70 mm
  • USB on the rim
Controls

What's on the wheel.

Counts as the maker and its retailers list them. A dash means no source states it.

Provisional. Sources disagree on this wheel, or only one source lists it. Treat these counts as a guide and check the maker's current listing.

12Buttons
5Rotary encoders
—Funky / joystick
—Rotary switches
—Toggles
2Paddlesshift

How we counted. Review lists 12 momentary pushbuttons and 5 rotary encoders on a Leo Bodnar controller board. No maker spec page found.

Specifications

The numbers.

SizeReview lists '315mm' against the grips; overall wheel diameter not stated
WeightTo confirm
ScreenNone
Rev lightsTo confirm
Shift paddlesMagnetic, carbon fibre paddles
Clutch paddlesTo confirm
Other paddlesTo confirm
ConnectionUSB to the PC (Leo Bodnar board); detachable coiled cable with DIN connector plus USB extension; not routed through the base
MaterialsCarbon fibre front plate and paddles
GripsPolyurethane, shore 90A
Mounting70 mm PCD, 3 x M5 screws plus a 3in spacer included; no quick release
SoftwareTo confirm
Price$1,200 + shipping, built to order with a 4-5 week lead time (2019 review)
On the adapter

How it fits.

Mount3 × 70 mm

Three bolts on the 70 mm circle: uses every other hole of the 6 × 70 face.

RearCarbon back

A structural carbon back carries the rim's load.

USBOn the rim

USB on the rim itself: one cable from the wheel to the adapter.

StatusBench test due

Carbon plate, USB straight to the PC. Discontinued; specs from one 2019 review.

Things to know

Before you buy.

  1. 01

    Replica of the Aston Martin Vantage GTE wheel, reviewed by Sim Racing Garage in 2019.

  2. 02

    No longer on turnracing.com; the current range is R305/R320 rims and the BP2 button plate.

  3. 03

    Leo Bodnar board on USB; the cable goes to the PC, not through the base.

  4. 04

    Turn Racing also published a free DIY 3D-print version on Printables and Thingiverse.

  5. 05

    All specs come from one review; no maker spec sheet was found.

Not tested yet

We haven't run the Turn Racing Vantage GTE on the adapter yet. Before we call any rim supported, we check a real unit: every control seen over USB, with no maker software running. Sim rims are built for a desk rig, are not crash-rated and have no airbag; the adapter carries controls only, for motorsport and off-road use where your series rules and scrutineer approve it.

Sources

Specs from the maker and its retailers, checked November 2026. Makers change specs and prices; check theirs before you buy.

Run a Vantage GTE?

Tell us on the waitlist. The most-requested wheels go on the bench first.

Join the waitlist