Telemetry Dongle Pro · For app developers

Built to work
with your app.

The Telemetry Dongle Pro speaks the formats track apps already understand, so many work on day one with nothing to build. For everything else, an open, documented interface gives your app every channel, on the dongle's own clock. TRACK is the app we build for; the data is yours to use anywhere.

Works on day one

No integration needed.
Just pair it.

Bluetooth LERaceChrono

Pair the dongle as a RaceChrono DIY device for the car's fast CAN data and the 25 Hz GPS together. Every car in our vehicle library with published CAN IDs has a ready-made RaceChrono channel setup to copy.

Find your car's RaceChrono setup →
Bluetooth LE · Wi-FiApps that use an OBD-II reader

The dongle answers like an ELM327-compatible reader, so lap timers and scan apps that already support one can read engine data and fault codes, on CAN and K-line cars.

Bluetooth LEAny app that takes an external GPS

25 Hz position as standard NMEA 0183 sentences, for lap timers that accept a Bluetooth GPS receiver.

RaceChrono DIY Bluetooth LE

RaceChrono's own format.
Full-rate CAN and GPS.

The dongle implements RaceChrono's published DIY interface: service 0x1FF8. RaceChrono asks for the CAN IDs it needs and the dongle sends the latest frame of each at the requested interval, plus 25 Hz GPS.

CharacteristicPropertiesCarries
CAN-Bus main · 0x0001Read, notifyLittle-endian CAN ID, then the frame payload (up to 16 bytes)
CAN-Bus filter · 0x0002WriteDeny all, allow all, or allow one ID at a set interval in ms
GPS main · 0x0003Read, notifyPosition, speed, bearing and accuracy at 25 Hz
GPS time · 0x0004Read, notifyDate and hour, matched to GPS main

CAN FD frames longer than the interface's 16-byte payload arrive here trimmed to 16 bytes; the full frames are on the GAINS interface below. Frames from the second CAN bus (OBD-II pins 3 and 11) carry bit 30 in their ID, so both buses can be logged at once.

OBD-II and GPS

The reader your app expects.
A GPS it already knows.

InterfaceWhereWhat
ELM327-compatible OBDBluetooth LE service 0xFFF0 (0xFFF1 notify, 0xFFF2 write) · Wi-Fi TCP 192.168.0.10:35000Standard AT commands; OBD services 01, 02, 03, 07, 09, 0A on CAN (ISO 15765-4) and K-line (ISO 9141-2, KWP2000)
NMEA 0183 GPSBluetooth LE Nordic UART service · Wi-Fi TCP :10110$GNRMC and $GNGGA at 25 Hz, satellites at 1 Hz

Read-only: service 04 (clear fault codes) and any write request is refused.

The GAINS open interface

Every channel, already scaled.
On one clock.

For apps that want the full experience: every channel the dongle reads on this car, named and in real units, health alerts, lap and sector events, and session downloads. All little-endian; every sample carries the dongle's timestamp.

Bluetooth LE service 1AC70000-E882-4671-9D7D-2F4FF35DD0C6

CharacteristicPropertiesPayload
0001 InfoReadModel, hardware, firmware and interface version (JSON)
0002 Channel catalogReadEvery channel on this car: id, name, unit, rate and source (JSON)
0003 SubscribeWritePick channels and a rate; zero means each channel's native rate
0004 Live framesNotifyDongle timestamp (µs), then id and value pairs, packed to the MTU
0005 EventsNotifyLimit alerts, new fault codes, lap and sector times (JSON lines)
0006 ControlWrite, indicateStart or stop logging, mark, set a track, Wi-Fi on, sync time

Wi-Fi: the dongle's own network, GAINS-TDP-xxxx, at 192.168.0.10

GETReturns
/api/v1/infoDevice and interface version
/api/v1/channelsChannel catalog
/api/v1/sessionsRecorded sessions with laps and size
/api/v1/sessions/{id}.csvEvery channel at full rate, one time column
/api/v1/sessions/{id}.ldMoTeC i2 log
/api/v1/sessions/{id}.vboVBO, for RaceChrono, Harry's LapTimer and Circuit Tools
/api/v1/sessions/{id}.jsonLaps, sectors, alerts and fault codes
/api/v1/live (WebSocket)Live JSON frames at the subscribed rates

Developer kit

Everything to build with.
Ready with the first units.

Open specification

This interface, versioned and published under CC BY 4.0. Breaking changes get a new major version, and the old one keeps working for 12 months.

Swift and Kotlin libraries

Discover, connect, read the channel catalog, subscribe and download sessions in a few lines. MIT licensed.

Sample sessions and a simulator

Recorded sessions and a desktop simulator that advertises the dongle's Bluetooth services, so you can build without a car.

Read-only, always

Every interface reads the car and never writes to it. Clear-code requests are refused, the same as in TRACK.

Building a track or data app?

Tell us what you're building and we'll get you the developer kit and early hardware.

Contact us