BMW · 2019–today

Z4 G29: every channel it can give you

No public data maps this car's chassis channels yet. 18 more chassis and driver channels are on the car, waiting for GAINS discovery. Plus 25 Hz GPS and a motion sensor in the dongle itself.

CAN (ISO 15765)Stability control: Standard (DSC)Manual / AutomaticB46 2.0 turbo I4, B58 3.0 turbo I6
18channels
18 To discover
6 Built into the dongle
OBD-II portCAN (ISO 15765)Fast, data stream capable
Internal CAN busYesWhere the chassis modules talk
GatewayDiagnostics onlyBetween the car's bus and the port
Stability control · ABSStandard (DSC)ABS: Standard

Channels

Every channel the G29 is expected to give, by group. Filter by how it arrives.

Driver inputs

Steering angle To discoverstability control (DSC)
Brake pressure To discoverstability control (DSC)
Brake pedal switch To discoverbrake lights
Clutch pedal To discovermanual gearbox · if fitted
Gear To discovergearbox

Wheels and chassis

Wheel speed, front left To discoverABS
Wheel speed, front right To discoverABS
Wheel speed, rear left To discoverABS
Wheel speed, rear right To discoverABS
Yaw rate To discoverstability control (DSC)
Lateral g To discoverstability control (DSC)
Longitudinal g To discoverstability control (DSC) · if fitted

Temperatures and pressures

Oil temperature To discoverengine (if the car measures it) · if fitted
Oil pressure To discoverengine (if the car measures it) · if fitted
Gearbox temperature To discoverautomatic / dual-clutch gearbox · if fitted

Stability systems

ABS active To discoverABS
Traction control active To discoverstability control (DSC)
Stability control active To discoverstability control (DSC)

Built into the dongle, on every car

GPS speed and position 25 Hz
Lap, sector and delta times computed
Lateral and longitudinal g motion sensor
Yaw rate motion sensor
Heading and altitude GPS
Combined g (friction circle) computed

How the data gets out

Where the G29's sensors live and how GAINS reaches them.

Car's internal CAN busEngineDSCSteeringDashGatewayrequests onlyOBD-II · CANTelemetry Dongle Pro plugs into the OBD-II port

Read the car's modules

A gateway keeps the data stream off the OBD-II port. Discovery asks the ABS, steering and gearbox modules for their values with read-only requests. A CAN tap lead behind the gateway gets the full-rate stream.

Telemetry Dongle Pro (module reads) · CAN tap lead for full rate (accessory, coming later)

Discovery on your Z4

The 18 channels marked “To discover” are learned once, from your car, then added for every G29 owner.

  1. Plug in and identify

    The dongle finds the bus speed by listening only, reads the VIN and matches the car's data pattern to our database.

    about 1 min
  2. Guided steps, parked

    The app walks you through each control for a few seconds: wheel lock to lock, brake light then firm, throttle (engine off), clutch, every gear, handbrake, stability-control button. The dongle records what changes on the car's data stream.

    about 5 min
  3. Module read

    With the car parked, the dongle asks each module (ABS, gearbox, body) which values it can report. Read-only requests: nothing is written or changed.

    about 5–10 min, automatic
  4. Short drive

    A normal drive with a few stops, steady speeds and turns. The dongle matches unknown values against its 25 Hz GPS and motion sensor to find wheel speeds, yaw rate and g-forces.

    10–15 min
  5. Results

    Matched channels appear in the app. Anything that needs a closer look is checked by us and added later; you get a notification, and every owner of the same car gets the channel too.

    most right after the drive

First time: about 25–30 minutes, once per car. Times are estimates until measured on real cars. Discovery only listens and reads: it never writes to the car, clears codes or bypasses security.

FAQ

Can I log steering angle and brake pressure on a Z4 G29 through the OBD-II port?

The G29 is expected to carry them (stability control (DSC)), but no public data maps them yet. GAINS discovery learns them from a capture of your car: read the car's modules. A standard OBD2 scan tool won't show them.

What OBD-II protocol does the Z4 G29 use?

CAN (ISO 15765). Its engine, stability and dash modules also share an internal CAN bus.

How long does discovery take on a G29?

The first time, about 25–30 minutes, once per car (estimate): guided steps while parked, a read-only module check and a short drive. After that the dongle recognises the car when you plug in.

Channel lists combine public vehicle data from the open-source community with the equipment this generation is known to carry. “Expected” and “To discover” channels are not yet confirmed by our own logs, and equipment varies by market, trim and year. Vehicle names identify the cars only; GAINS is not affiliated with BMW. Specifications are pre-release and may change before launch.