Mazda · 2016–today

MX-5 Miata ND: every channel it can give you

18 channels are already mapped from public vehicle data. 9 more chassis and driver channels are on the car, waiting for GAINS discovery. Plus 25 Hz GPS and a motion sensor in the dongle itself.

CAN (ISO 15765)Stability control: Standard (DSC)Manual / AutomaticSKYACTIV-G 2.0 I4 (US)
28channels
18 Data stream
1 Standard OBD2
9 To discover
6 Built into the dongle
OBD-II portCAN (ISO 15765)Fast, data stream capable
Internal CAN busYesWhere the chassis modules talk
GatewayNone: data stream at the portBetween the car's bus and the port
Stability control · ABSStandard (DSC)ABS: Standard

Channels

Every channel the ND is expected to give, by group. Filter by how it arrives.

Driver inputs

Steering angle Data stream
Steering rate Data stream
Accelerator pedal Data stream
Throttle position Standard OBD2
Brake pressure Data stream
Brake pedal switch To discoverbrake lights
Clutch pedal Data stream
Gear To discovergearbox

Wheels and chassis

Wheel speed, front left Data stream
Wheel speed, front right Data stream
Wheel speed, rear left Data stream
Wheel speed, rear right Data stream
Vehicle speed Data stream
Yaw rate To discoverstability control (DSC)
Lateral g Data stream
Longitudinal g Data stream

Engine

Engine RPM Data stream
Intake air temperature Data stream
Fuel level Data stream

Temperatures and pressures

Oil temperature To discoverengine (if the car measures it) · if fitted
Oil pressure To discoverengine (if the car measures it) · if fitted
Coolant temperature Data stream
Gearbox temperature To discoverautomatic / dual-clutch gearbox · if fitted
Outside temperature Data stream

Stability systems

ABS active To discoverABS
Traction control active To discoverstability control (DSC)
Stability control active To discoverstability control (DSC)
Stability control off switch Data stream

Built into the dongle, on every car

GPS speed and position 25 Hz
Lap, sector and delta times computed
Lateral and longitudinal g motion sensor
Yaw rate motion sensor
Heading and altitude GPS
Combined g (friction circle) computed

How the data gets out

Where the ND's sensors live and how GAINS reaches them.

Car's internal CAN busEngineDSCSteeringDashOBD-II · CANTelemetry Dongle Pro plugs into the OBD-II port

Listen at the OBD-II port

The car's own data stream reaches the OBD-II port, so discovery only listens: it matches each value to your steering, pedals, GPS and motion.

Telemetry Dongle Pro

Discovery on your MX-5 Miata

The 9 channels marked “To discover” are learned once, from your car, then added for every ND owner.

  1. Plug in and identify

    The dongle finds the bus speed by listening only, reads the VIN and matches the car's data pattern to our database.

    about 1 min
  2. Guided steps, parked

    The app walks you through each control for a few seconds: wheel lock to lock, brake light then firm, throttle (engine off), clutch, every gear, handbrake, stability-control button. The dongle records what changes on the car's data stream.

    about 5 min
  3. Module read

    With the car parked, the dongle asks each module (ABS, gearbox, body) which values it can report. Read-only requests: nothing is written or changed.

    about 5–10 min, automatic
  4. Short drive

    A normal drive with a few stops, steady speeds and turns. The dongle matches unknown values against its 25 Hz GPS and motion sensor to find wheel speeds, yaw rate and g-forces.

    10–15 min
  5. Results

    Matched channels appear in the app. Anything that needs a closer look is checked by us and added later; you get a notification, and every owner of the same car gets the channel too.

    most right after the drive

First time: about 25–30 minutes, once per car. Times are estimates until measured on real cars. Discovery only listens and reads: it never writes to the car, clears codes or bypasses security.

Published CAN IDs

Community definitions for the ND: expected values, not yet confirmed by our own logs.

Show 19 signals
ChannelCAN IDStart bit · lengthByte orderScale · offsetUnit
Engine RPM0x2027 · 16Motorola (BE)0.25 · 0rpm
Vehicle speed0x20223 · 16Motorola (BE)0.01 · 0kph
Accelerator pedal0x20239 · 8Motorola (BE)0.4 · 0%
Steering angle0x867 · 16Motorola (BE)0.1 · -1600deg
Brake pressure0x7827 · 12Motorola (BE)1 · 0raw
Longitudinal g0x785 · 13Motorola (BE)0.01 · -40m/s^2
Lateral g0x788 · 13Motorola (BE)0.001 · -4.096m/s^2
Wheel speed, front left0x2157 · 16Motorola (BE)0.01 · -100kph
Wheel speed, front right0x21523 · 16Motorola (BE)0.01 · -100kph
Wheel speed, rear left0x21539 · 16Motorola (BE)0.01 · -100kph
Wheel speed, rear right0x21555 · 16Motorola (BE)0.01 · -100kph
Steering rate0x24123 · 16Motorola (BE)0.25 · -8192deg/s
Coolant temperature0x4207 · 8Motorola (BE)1 · -40degC
Intake air temperature0x42039 · 8Motorola (BE)1 · -40degC
Outside temperature0x42055 · 16Motorola (BE)1 · 0raw
Fuel level0x43F7 · 16Motorola (BE)1 · 0raw
Clutch pedal0x5031 · 8Motorola (BE)1 · 0raw
gear ratio raw0x16555 · 16Motorola (BE)1 · 0raw
Stability control off switch0x4153 · 1Motorola (BE)1 · 0raw

Full details and sources: Mazda MX-5 Miata data by year.

FAQ

Can I log steering angle and brake pressure on a MX-5 Miata ND through the OBD-II port?

Yes, expected on the data stream. A standard OBD2 scan tool won't show them because they aren't standard OBD2 values.

What OBD-II protocol does the MX-5 Miata ND use?

CAN (ISO 15765). Its engine, stability and dash modules also share an internal CAN bus.

How long does discovery take on a ND?

The first time, about 25–30 minutes, once per car (estimate): guided steps while parked, a read-only module check and a short drive. After that the dongle recognises the car when you plug in.

Channel lists combine public vehicle data from the open-source community with the equipment this generation is known to carry. “Expected” and “To discover” channels are not yet confirmed by our own logs, and equipment varies by market, trim and year. Vehicle names identify the cars only; GAINS is not affiliated with Mazda. Specifications are pre-release and may change before launch.