Engine: B18C (GS-R / Type R)
Part of the Honda B-series family.
Modeled power and torque
Modelled estimate, not a dyno result.
Modeled estimate, not a dyno measurement. Real results vary with fuel, weather, dyno type and build.
Stock is anchored to the factory rating (170 hp at 7600 rpm, 128.3 lb-ft at 6200 rpm); the curve shape between peaks is modeled. Intake + exhaust + tune (pump fuel): Typical NA gains come mostly above mid-rpm.
B18C (GS-R / Type R) data
- Load sensing
- MAP speed-density
- O2 sensor
- narrowband (zirconia), heated on later PGM-FI; no wideband on this family per sources consulted
- Closed loop
- narrowband closed loop at idle/cruise, open loop cold start and WOT/high load
- Block
- aluminium (high-pressure die-cast)
- Rods / pistons
- 137.9 mm rods (Wikipedia) · Type R (B18C5): high-pressure die-cast aluminium pistons with moly-coated skirts per a syndicated magazine excerpt (search excerpt only; page 404 on fetch, unverified)
- Reported limit
- Not yet sourced
- Factory
- Honda top-feed (Keihin/Denso family; maker not confirmed)
- Impedance
- high (saturated)
- Direct-fit upgrades
- 6 maker-listed
- Knock
- Honda 30530-PV1-A01
- MAP / MAF
- Honda 37830-PAA-S00 (replaces 37830-P0G-S00)
- O2 (upstream)
- Honda 36531-P73-G01 (replaces 36531-P72-A02)
Platform background
The third-generation Integra (DC2 coupe, DB8 sedan) carried the 170 hp B18C1 in GS-R form and, from 1997, the hand-assembled 195 hp B18C5 Type R. The 1994-95 cars are OBD1 and 1996-2001 cars OBD2, and GS-R ECUs belong to the 37820-P72 part-number family. The DC2 also shares mount geometry with the EG Civic.
Factory ECU
Factory ECU: harness cross-reference
From the factory ECU each listed harness plugs into. The factory ECU is unplugged, not modified. Check the label and part number on your own ECU before ordering.
- ECU family
- Honda OBD1 37820-Pxx (1992-95)
- Applies to
- 1992-95 Civic/Integra/Prelude, 1990-95 Accord; manual
- Not for
- automatic; OBD0 and OBD2 (1996+)
Honda part format 37820-<3-char engine code>-<rev>; code shown on ECU sticker (e.g. P28 = Civic EX/Si). Specific full part numbers not confirmed; A=US, J=Japan suffix convention per source.
- ECU family
- Honda OBD1
- Applies to
- 1992-95 Civic, Accord, Prelude; 1992-95 Integra (manual)
- Not for
- Not OBD2 (1996+); some Integra codes (P72/P75) exist in both OBD1 and OBD2 versions
One harness covers several OBD1 ECU part codes across Civic/Integra/Accord/Prelude; early 1992-93 Integra (DA) may be OBD0-style - verify. No OEM numbers verified from allowed sources.
- ECU family
- Honda OBD2
- Applies to
- Label 1996-99, selector 1996-2001; manual
- Not for
- OBD2a vs OBD2b connector split around 1998-99 - confirm
Label (1996-99) and selector years (1996-2001) disagree; may straddle OBD2a/OBD2b. No numbers verified.
- ECU family
- Honda OBD2
- Applies to
- Label 2000-01, selector 1998-2002; manual; 37820-P2P-A12 = 1999-2000 Civic 4-door non-VTEC-E
Part numbers are examples for one Civic variant only (dealer catalogue snippet); Integra/Accord codes not verified.
Factory ECU pinout
Each connector face drawn from the OEM service manual's pin data, with every terminal's function and wire colour where the manual prints it.
Honda OBD1 PGM-FI ECU (1992-95 Civic, 1994-95 Integra)
The 1992-95 Honda Civic and 1994-95 Acura Integra use a PGM-FI ECU (often called OBD1, e.g. P28, P72) with three harness plugs: A (26 cavities), B (16) and D (22), 64 cavities in all. A carries injectors, ignition output, relays and grounds; B carries power, distributor TDC/crank/cylinder pickups and switches; D carries sensors, 5 V supplies and diagnostics.
1992-1995 · USA / Canada (as documented); other markets not verified · 3 connectors, 64 cavities · 64 terminals sourced · ECU 37820-P28-A01, 37820-P06-A01, 37820-P72-A01, 37820-P75-A01
Looking into the ECU's connector. The harness plug seen from its wire side has the same layout.
How the OEM figure is oriented
Drawn as printed by Honda: the 1994 Integra manual p. 11-29 shows the ECM harness plugs C410/C408/C409 with a single outline (female terminals, which its legend says are viewed from the wire side), odd numbers on the top row ascending left to right, latch on top. A female plug seen from its wire side has the same handedness as looking into the ECM header, so this is recorded as ecu-side. The 1992 Civic terminal-location figures (pp. 11-13, 11-39) show the same A-B-D arrangement and numbering.| Pin | Function | Type | Wire | Notes |
|---|---|---|---|---|
| A1 | Injector #1 (INJ1) | low-side injector driver | BRN | Integra 1994: INJ1, BRN. |
| A2 | Injector #4 (INJ4) | low-side injector driver | YEL | Integra 1994: INJ4, YEL (printed YEL1). |
| A3 | Injector #2 (INJ2) | low-side injector driver | RED | Integra 1994: INJ2, RED (printed RED1). |
| A4 | VTEC spool solenoid valve (VTS) | low-side solenoid driver | ORN/WHT | Civic 1992: used on D15Z1 and D16Z6 (VTEC) engines only. Integra 1994: VTEC solenoid valve (VT SOL), GRN/YEL, B18C1 (GS-R) only. |
| A5 | Injector #3 (INJ3) | low-side injector driver | LT BLU | Integra 1994: INJ3, BLU. |
| A6 | Oxygen sensor heater control (HTCNTL) | low-side heater driver | ORN/BLK | Civic 1992: heated O2 sensor heater (D15B7, D16Z6) or LAF sensor heater (D15Z1). Integra 1994: O2 sensor heater control (O2SHTC), ORN/BLK. |
| A7 | PGM-FI main relay, fuel pump side (FLR1) | low-side relay driver | GRN/YEL | Integra 1994: FLR1, GRN/BLU. |
| A8 | PGM-FI main relay, second feed (FLR2) | low-side relay driver | GRN/YEL | Civic 1992 shows A7 and A8 joined to the main relay. Integra 1994: no wire ("—"). |
| A9 | Idle air control valve (EACV) | idle air valve driver | GRN/WHT | Integra 1994: IAC valve (IACV), BLK/BLU. |
| A10 | Not used | Other / not used | — | No ECU wire at this cavity on the 1992 Civic schematic (pp. 11-12 to 11-18) or in the 1994 Integra C410 table ("—"). |
| A11 | EGR control solenoid valve (ES) | low-side solenoid driver | ORN/BLU | Civic 1992: D15Z1 engine only. Integra 1994: no wire ("—"). |
| A12 | Radiator fan control (FANC) | low-side relay driver | YEL/GRN | Integra 1994: FANC, GRN (to radiator fan relay and condenser fan relay). |
| A13 | Check engine light (WARN) | lamp driver | GRN/ORN | Integra 1994: malfunction indicator lamp (MIL), GRN/ORN. |
| A14 | Not used | Other / not used | — | No ECU wire at this cavity on the 1992 Civic schematic (pp. 11-12 to 11-18) or in the 1994 Integra C410 table ("—"). |
| A15 | A/C compressor clutch relay (ACC) | low-side relay driver | BLK/RED | Integra 1994: ACC, BLK/RED. |
| A16 | Alternator control (ACGC) | alternator control output | — | Civic 1992 p. 11-15 prints WHT/YEL and PNK beside one A16 label and the D9 label is missing there, so the wire colour of A16 versus D9 cannot be assigned from the figure. Integra 1994: alternator control (ALT C), WHT/GRN. (medium confidence) |
| A17 | A/T lock-up control solenoid valve B (ATLSB) | low-side solenoid driver | GRN/BLK | Civic 1992: A/T only. Integra 1994: IAB control solenoid valve (IAB CS), PNK/BLU, B18C1 only. |
| A18 | Not used | Other / not used | — | No ECU wire at this cavity on the 1992 Civic schematic (pp. 11-12 to 11-18) or in the 1994 Integra C410 table ("—"). |
| A19 | A/T lock-up control solenoid valve A (ATLSA) | low-side solenoid driver | YEL | Civic 1992: A/T only. Integra 1994: FAS signal to the TCM, YEL (printed YEL2), B18B1 A/T only. |
| A20 | Purge cut-off solenoid valve (PGS) | low-side solenoid driver | RED | Integra 1994: EVAP purge control solenoid valve (PCS), RED (printed RED2). |
| A21 | Ignition output to igniter unit (IGP1, printed with a theta prefix) | igniter trigger output | RED/GRN | Civic 1992: A21 and A22 are joined and run to the igniter unit. Integra 1994: ignition control module output (ICM 1), YEL/GRN. |
| A22 | Ignition output to igniter unit (IGP2, printed with a theta prefix) | igniter trigger output | RED/GRN | Civic 1992: joined with A21 to the igniter unit. Integra 1994: no wire ("—"). |
| A23 | Power ground (PG1) | power ground | BLK | Integra 1994: PG1, BLK (printed BLK1). |
| A24 | Power ground (PG2) | power ground | BLK | Integra 1994: PG2, BLK (printed BLK2). |
| A25 | Ignition power from PGM-FI main relay (IGP1) | 12 V switched supply | YEL/BLK | Integra 1994: IGP1, YEL/BLK. |
| A26 | Logic ground (LG1) | logic ground | BLK/RED | Integra 1994: LG1, BRN/BLK. |
Our drawing from published pin data; not an OEM drawing. Layout from the OEM face view (high confidence). Confirm against the factory manual for your exact year and market before cutting or pinning wires.
Looking into the ECU's connector. The harness plug seen from its wire side has the same layout.
How the OEM figure is oriented
Drawn as printed by Honda: the 1994 Integra manual p. 11-29 shows the ECM harness plugs C410/C408/C409 with a single outline (female terminals, which its legend says are viewed from the wire side), odd numbers on the top row ascending left to right, latch on top. A female plug seen from its wire side has the same handedness as looking into the ECM header, so this is recorded as ecu-side. The 1992 Civic terminal-location figures (pp. 11-13, 11-39) show the same A-B-D arrangement and numbering.| Pin | Function | Type | Wire | Notes |
|---|---|---|---|---|
| B1 | Ignition power from PGM-FI main relay (IGP2) | 12 V switched supply | YEL/BLK | Integra 1994: IGP2, YEL/BLK. |
| B2 | Logic ground (LG2) | logic ground | BRN/BLK | Integra 1994: LG2, BRN/BLK. |
| B3 | A/T shift position D3 signal (ATD3) | switch input | GRN/BLU | Civic 1992: A/T only, from the shift position console switch. Integra 1994: A/T FI signal A (AFSA) from the TCM, GRN/BLU, B18B1 only. |
| B4 | A/T shift position D4 signal (ATD4) | switch input | GRN/BLK | Civic 1992: A/T only. Integra 1994: A/T FI signal B (AFSB) from the TCM, GRY, B18B1 only. |
| B5 | A/C switch signal (ACS) | switch input | BLU/RED | Integra 1994: ACS, BLU/RED. |
| B6 | Not used | Other / not used | — | No ECU wire at this cavity on the 1992 Civic schematic (pp. 11-12 to 11-18) or in the 1994 Integra C408 table ("—"). |
| B7 | Clutch switch (CLSW, M/T) or A/T park/neutral position (ATNP) | switch input | — | Civic 1992: M/T clutch switch, PNK/BLK, D15Z1 only; A/T park/neutral, GRN. Integra 1994: A/T park/neutral (ATP PN), LT GRN/BLK, B18B1 only. (medium confidence) |
| B8 | Power steering oil pressure switch (PSW) | switch input | BRN/RED | Integra 1994: PSP SW, GRN. |
| B9 | Starter signal (STS) | 12 V input while cranking | BLU/WHT | Integra 1994: STS, BLU/WHT. |
| B10 | Vehicle speed sensor (VSP) | pulse input | YEL/BLU | Integra 1994: VSS, ORN (printed ORN1). |
| B11 | Cylinder (CYL) sensor + (CYL P) | inductive pickup + | ORN | Integra 1994: CYP P, ORN (printed ORN2). Sensor sits in the distributor (TDC/CKP/CYP sensor assembly). |
| B12 | Cylinder (CYL) sensor - (CYL M) | inductive pickup - | WHT | Integra 1994: CYP M, WHT. |
| B13 | TDC sensor + (TDC P) | inductive pickup + | ORN/BLU | Integra 1994: TDC P, ORN/BLU. |
| B14 | TDC sensor - (TDC M) | inductive pickup - | WHT/BLU | Integra 1994: TDC M, WHT/BLU. |
| B15 | Crank sensor + (CRNK P) | inductive pickup + | BLU/GRN | Integra 1994: CKP P, BLU/GRN. |
| B16 | Crank sensor - (CRNK M) | inductive pickup - | BLU/YEL | Integra 1994: CKP M, BLU/YEL. |
Our drawing from published pin data; not an OEM drawing. Layout from the OEM face view (high confidence). Confirm against the factory manual for your exact year and market before cutting or pinning wires.
Looking into the ECU's connector. The harness plug seen from its wire side has the same layout.
How the OEM figure is oriented
Drawn as printed by Honda: the 1994 Integra manual p. 11-29 shows the ECM harness plugs C410/C408/C409 with a single outline (female terminals, which its legend says are viewed from the wire side), odd numbers on the top row ascending left to right, latch on top. A female plug seen from its wire side has the same handedness as looking into the ECM header, so this is recorded as ecu-side. The 1992 Civic terminal-location figures (pp. 11-13, 11-39) show the same A-B-D arrangement and numbering.| Pin | Function | Type | Wire | Notes |
|---|---|---|---|---|
| D1 | Back-up power, constant battery (VBU) | 12 V constant supply | WHT/BLU | Fed through the BACK UP (7.5 A) fuse. Integra 1994: VBU, WHT/BLU. |
| D2 | Brake switch (BKSW) | 12 V switch input | GRN/WHT | Integra 1994: BKSW, GRN/WHT (printed GRN/WHT1). |
| D3 | LAF sensor label resistor (LABEL) | analog input | BLU/YEL | Civic 1992: D15Z1 (LAF sensor) only. Integra 1994: knock sensor (KS), RED/BLU, B18C1 only. |
| D4 | Service check connector (SCS) | diagnostic input | BRN | Integra 1994: SCS, BRN/WHT. |
| D5 | Not used | Other / not used | — | No ECU wire at this cavity on the 1992 Civic schematic (pp. 11-12 to 11-18) or in the 1994 Integra C409 table ("—"). |
| D6 | Valve timing oil pressure switch (VTM) | switch input | ORN/BLU | Civic 1992: D15Z1 and D16Z6 only. Integra 1994: VTEC pressure switch (VTP SW), BLU/BLK, B18C1 only. |
| D7 | Data link connector (TXD/RXD) | serial data | LT BLU | Integra 1994: TXD/RXD, LT BLU. |
| D8 | LAF sensor VS+ (VS+) | LAF sensor signal | WHT/BLU | Civic 1992: D15Z1 only. Integra 1994: barometric pressure output to the TCM (BARO OUT), LT GRN, B18B1 A/T only. |
| D9 | Alternator FR signal (ACGF) | analog input | — | See A16: the Civic 1992 figure does not print a separate D9 wire colour. Integra 1994: ALT F, WHT/RED (printed WHT/RED1). (medium confidence) |
| D10 | Electrical load detector (EL) | analog input | GRN/RED | Integra 1994: ELD, GRN/RED (Integra figure marks the ELD as USA only). |
| D11 | Throttle angle sensor signal (TH, printed with a theta prefix) | 0-5 V analog | LT GRN | Integra 1994: TPS, RED/BLK. |
| D12 | EGR valve lift sensor (EGRL) | 0-5 V analog | WHT/BLK | Civic 1992: D15Z1 only. Integra 1994: no wire ("—"). |
| D13 | Coolant temperature sensor (TW) | thermistor input | RED/WHT | Integra 1994: ECT, RED/WHT. |
| D14 | Oxygen sensor signal (O2), or LAF sensor IP+ on D15Z1 | O2 / LAF signal | — | Civic 1992: WHT for the O2 sensor (D15B8) and heated O2 sensor (D15B7, D16Z6); ORN/BLU for the LAF sensor IP+ (D15Z1). Integra 1994: O2S, WHT/RED (printed WHT/RED2). (medium confidence) |
| D15 | Intake air temperature sensor (TA) | thermistor input | RED/YEL | Integra 1994: IAT, RED/YEL. |
| D16 | LAF sensor IP- / VS- (IP-, VS-) | LAF sensor signal | BLU/GRN | Civic 1992: D15Z1 only. Integra 1994: VREF to the TCM, WHT/BLK, B18B1 only. |
| D17 | MAP sensor signal (PB) | 0-5 V analog | WHT | Integra 1994: MAP (PB), WHT/YEL. |
| D18 | Shift-up indicator (SIL, M/T) or A/T interlock control (SLU) | low-side driver | — | Civic 1992: SIL to the shift-up indicator light, PNK/GRN (M/T); SLU to the interlock control unit, WHT/RED (A/T). Integra 1994: no wire ("—"). (medium confidence) |
| D19 | Sensor 5 V supply 1 (VCC1) | 5 V reference | YEL/GRN | Civic 1992: MAP sensor supply. Integra 1994: VCC1, YEL/WHT. |
| D20 | Sensor 5 V supply 2 (VCC2) | 5 V reference | YEL/WHT | Civic 1992: throttle angle sensor supply. Integra 1994: VCC2, YEL/BLU. |
| D21 | Sensor ground 1 (SG1) | sensor ground | GRN/BLU | Integra 1994: SG1, GRN/WHT (printed GRN/WHT2). |
| D22 | Sensor ground 2 (SG2) | sensor ground | GRN/WHT | Integra 1994: SG2, GRN/BLU. |
Our drawing from published pin data; not an OEM drawing. Layout from the OEM face view (high confidence). Confirm against the factory manual for your exact year and market before cutting or pinning wires.
Coverage, year splits and safety
Pin rows follow the 1992 Civic (USA/Canada) manual, which covers the D15B7, D15B8, D15Z1 and D16Z6 engines; each row's notes give the 1994 Integra (B18B1 / B18C1) function and wire colour. Both manuals use the same A-B-D layout and numbering, and the core circuits (power, grounds, injectors, TDC/crank/cylinder pickups, sensor supplies) sit on the same cavities. Model-specific pins (VTEC, knock, IAB, LAF sensor, A/T) differ.
There is no connector C on these ECUs: Honda's terminal-location figures draw a shaded, unnumbered block between B and D. Wire colours differ between Civic and Integra harnesses on many pins (for example A26 is BLK/RED on the Civic and BRN/BLK on the Integra), so check the colour against your own car.
Not verified here: 1993-95 Civic and 1993-95 del Sol changes after the 1992 manual, the B16A Civic VTi (non-US), JDM and European ECUs, and 1995 Integra changes after the 1994 manual. The Integra GS-R parts listing covers both 1994 and 1995 with the same ECU number.
Year split for the DC2 Integra catalog rows (1994-2001): only 1994-95 use this A-B-D ECU. The 1998 Integra manual lists the ECM harness plugs as ECM-A, ECM-C and ECM-D, a different set, so 1996-2001 cars (including the Type R) are outside this page.
Safety: disconnect the battery negative before unplugging or wiring the ECU, and wait as the manual's ECU procedures direct. The 1992 Civic and 1994 Integra manuals test at the ECU with a test harness between the ECU and its plugs; do not force sharp probes into the plug cavities, which can spread the female terminals.
Plug-and-play harness
A plug-in harness built for the Haltech Nexus S3 pinout is listed for this vehicle. The ECU2 follows that published pinout, so the factory ECU is unplugged and the ECU2 plugs into the car's own loom. Nothing is written to the factory ECU. Pin-compatible per the published S3 pinout, not yet fit-tested.
| Maker | Harness | Fits | Link | |
|---|---|---|---|---|
| Nexus S2/S3 Plug n Play Adapter Harness Honda OBD-IHT-186331 | 1992-95 Civic/Integra/Prelude, 1990-95 Accord; manual | $495Lowest | Maker ↗ | |
![]() | Manual 1992 - 1995 Acura IntegraBF29002-S3 | 1992-95 Civic, Accord, Prelude; 1992-95 Integra (manual) | $840 | Maker ↗ |
![]() | Manual 1996 - 1999 Acura IntegraBF29004-S3 | Label 1996-99, selector 1996-2001; manual | $840 | Maker ↗ |
![]() | Manual 2000 - 2001 Acura IntegraBF29005-S3 | Label 2000-01, selector 1998-2002; manual; 37820-P2P-A12 = 1999-2000 Civic 4-door non-VT… | $840 | Maker ↗ |
| Wire-in | Universal flying lead or re-terminated factory harness | Any engine (terminate to ECU2's two Superseal 34 connectors) | Universal harness from $405 | Maker ↗ |
Nexus S2/S3 Plug n Play Adapter Harness Honda OBD-I
- Plugs into
Honda OBD1 ECU (P28 / P30 / P72 / P05 etc.)
- ECU
- Honda OBD1 37820-Pxx (1992-95)
- Confidence
- low
Honda part format 37820-<3-char engine code>-<rev>; code shown on ECU sticker (e.g. P28 = Civic EX/Si). Specific full part numbers not confirmed; A=US, J=Japan suffix convention per source.
Sources: E-1441
- Fits
- 1992-95 Civic/Integra/Prelude, 1990-95 Accord; manual
- Exclusions
- automatic; OBD0 and OBD2 (1996+)
- SKU
- HT-186331
- Maker fitment
- Honda OBD-I: 1992-95 Civic/Integra/Prelude and 1990-95 Accord; manual only
- Maker notes
- (search snippet); kit HT-213300

Boomslang plug-and-play harness for Haltech Nexus S3 - Manual 1992 - 1995 Acura Integra
- Plugs into
Honda OBD1 ECU (e.g. P28 / P30 / P72 / P75 class)
- ECU
- Honda OBD1
- Confidence
- low
One harness covers several OBD1 ECU part codes across Civic/Integra/Accord/Prelude; early 1992-93 Integra (DA) may be OBD0-style - verify. No OEM numbers verified from allowed sources.
- Fits
- 1992-95 Civic, Accord, Prelude; 1992-95 Integra (manual)
- Exclusions
- Not OBD2 (1996+); some Integra codes (P72/P75) exist in both OBD1 and OBD2 versions
- SKU
- BF29002-S3
- Maker fitment
- Acura Integra; Honda Accord; Honda Civic; Honda Prelude (Manual); selector years 1992-1995; SKU label: Manual 1992 - 1995 Acura Integra
- Maker notes
- separate SKUs exist for other Nexus models (-S2/-R3/-R5/-T1/-T2); USDM selector

Boomslang plug-and-play harness for Haltech Nexus S3 - Manual 1996 - 1999 Acura Integra
- Plugs into
Honda OBD2a ECU (1996-98 Civic/Integra/Accord/Prelude)
- ECU
- Honda OBD2
- Confidence
- low
Label (1996-99) and selector years (1996-2001) disagree; may straddle OBD2a/OBD2b. No numbers verified.
- Fits
- Label 1996-99, selector 1996-2001; manual
- Exclusions
- OBD2a vs OBD2b connector split around 1998-99 - confirm
- SKU
- BF29004-S3
- Maker fitment
- Acura Integra; Honda Accord; Honda Civic; Honda Prelude (Manual); selector years 1996-2001; SKU label: Manual 1996 - 1999 Acura Integra
- Maker notes
- separate SKUs exist for other Nexus models (-S2/-R3/-R5/-T1/-T2); USDM selector

Boomslang plug-and-play harness for Haltech Nexus S3 - Manual 2000 - 2001 Acura Integra
- Plugs into
Honda OBD2b ECU (1999-2001 Civic/Integra/Accord) · 37820-P2P-A12, 37820-P2P-A11
- OEM part numbers
- 37820-P2P-A12, 37820-P2P-A11
- ECU
- Honda OBD2
- Confidence
- low
Part numbers are examples for one Civic variant only (dealer catalogue snippet); Integra/Accord codes not verified.
Sources: E-1461
- Fits
- Label 2000-01, selector 1998-2002; manual; 37820-P2P-A12 = 1999-2000 Civic 4-door non-VTEC-E
- SKU
- BF29005-S3
- Maker fitment
- Acura Integra; Honda Accord; Honda Civic (Manual); selector years 1998-2002; SKU label: Manual 2000 - 2001 Acura Integra
- Maker notes
- separate SKUs exist for other Nexus models (-S2/-R3/-R5/-T1/-T2); 2000-01
Haltech and Boomslang are trademarks of their respective owners. GAINS is not affiliated with or endorsed by them.
Your GAINS system for this car · pre-release
ECU2 for the Integra DC2
Planned with the same rules as the configurator for this car's 4 cyl · port injection · cable throttle. The factory ECU is unplugged and replaced; nothing is written to it.

- Price TBA
ECU2Engine controller
4 cyl · port injection · cable throttle
Runs this 4-cylinder's injectors and its distributor on one ignition output, with the wideband built in.
in designEst. availability: April 2027
Add PDM2 to switch and protect chassis loads (pumps, fans, lights, accessories). Add it in the configurator →
Track days? Add the Telemetry Dongle Pro for 25 Hz GPS lap timing; it plugs into the OBD-II port, and your phone is the dash. Plan it in the configurator →
What you get
- A screen on the ECUA 2.4-inch, 500-nit display in the lid, readable in a footwell.
- Faults in plain words"Coolant temp sensor open circuit.
- S3-style harnessesConnector A and C pin functions follow the published Nexus S3 wiring diagram.
- Powered CAN portA sealed 4-pin port on the insert carries 12 V and CAN for the PDM2 and GAINS displays: one cable per accessory.
- GAINS insideThe on-ECU adaptive layer, the app, logging and your limits.
How it wires in
- Haltech S3 plug-in harness1 listed · from $495 USD listHT-186331
- Factory-connector → S3 adapter3 listed · from $840 USD list
- Wire-inAlways possible
Pin-compatible per the published S3 pinout, not yet fit-tested. Every harness option for this car ↓
ECU2 is in design; specifications may change. All GAINS hardware is pre-release concept design; nothing is for sale yet and no application is validated on a vehicle. Harness fitment is from published pinouts and not yet fit-tested.
Swap guides
Into the Integra DC2
How GAINS approaches the Integra DC2
Our starting method for this engine, as foundations first: get it running and drivable, then learn fuel, then the hardware-specific strategies. It is a methodology outline, not a validated calibration.
- 1Base map and first startplanned
Start from displacement, injector data and the sensors fitted, then let the first-start learner settle cranking, idle and warm-up before any load work. The goal is a safe, running engine, not a finished calibration.
- 2Lambda targets and VE learningclosed loop on GAINS ECUs
Air-fuel targets come from your goal (street, track, economy). The ECU then learns its fuel table cell by cell from the onboard wideband inside a signed envelope, and you approve promoting what it learned into the base map.
- 3VTEC crossoverplanned
VTEC engagement is treated as a load and rpm surface where the two cam profiles cross on torque, learned from logs rather than a single fixed rpm.
- 4Drivability foundationsplanned
Pedal map, tip-in and decel fuel, idle control, cold start and warm-up enrichment: the tables tuners spend hours on after the main map. Each is a strategy in the knowledge engine with its own limits.
- 5Factory load sensingfactory reference
What the factory ECU measures load with: MAP speed-density (medium confidence)
- 6Wideband sensorhardware
factory sensor type changes by year/market (narrowband on earlier cars); fit a Bosch LSU 4.9 for the GAINS ECU's built-in controller either way
Drivetrain
Hydraulic-clutch B-series manual transmissions (e.g. Y80 OBD1, S80 OBD2 listed for B18C variants)
Low confidence8Chassis integration
Tuning notes
B18C blocks are commonly re-sleeved for high power (e.g. to 84 mm)
Low confidence7Natural-aspiration gains come from intake, header, cam gears and moving the VTEC point to the torque-curve crossover. The Type R's 10.6:1 static compression leaves little knock margin for boost on pump fuel.
Popular swaps
GAINS on the Integra DC2
ECU2
Designed so your phone is the laptop, keypad and dash
The GAINS app is designed to handle tuning, logging, gauges and switch inputs over Bluetooth, so the system needs no separate CAN keypad or display. Keypad, dash and logging views are planned; the iOS prototype runs on simulated data today.
Wideband, IMU and logging built in
An onboard Bosch LSU 4.9 wideband controller, a 6-axis IMU and onboard logging are designed into the ECU rather than sold as add-on modules.
Modular, so you buy what the engine needs
This engine runs on ECU2. PDM2 (power, body and gearbox) is optional and connects over ECU2's powered CAN port; the Telemetry Dongle Pro adds GPS lap timing from the OBD-II port.
Calibration that keeps learning
Instead of a fixed map that drifts as parts and conditions change, the ECU keeps adapting its fuel trims within limits you can see and approve in the app.
Adaptive tuning strategies
- VE learning closed loop on GAINS ECUs
Learns the fuel table from the onboard wideband as you drive, cell by cell, inside a signed authority envelope. Learned trims are promoted into the base map without a step in fuelling.
- Goal-based lambda targets closed loop on GAINS ECUs
Sets air-fuel targets from your goal (economy, response, power, safety margin) instead of a single fixed table.
- Knock protection protection
Listens for knock on a dedicated knock processor, pulls timing at once and restores it slowly. It only ever reduces advance.
- Warm-up, cranking, idle and transient fuel planned
The same learning approach applied to the tables tuners spend hours on after the main map is done.
- Spark advance and boost authority gated
Widening ignition advance or boost is never automatic. It stays an expert or dyno decision until validated knock detection exists for the engine family.
Already running another ECU? In advisor mode the same strategies read your logs and recommend exact table changes with the reasoning, which you apply in your ECU vendor's own software.
GAINS hardware is pre-release concept design. Simulated results only; nothing is validated on a vehicle yet.
Frequently asked
What is the difference between the GS-R and Type R engines?
Both are 1.8-litre B18C VTEC engines. The GS-R B18C1 makes 170 hp at 10.0:1; the Type R B18C5 is hand-assembled at 10.6:1 and makes 195 hp.28
When does VTEC engage on the B18C1?
Around 4400 rpm per published specs; the ECU also checks oil pressure, temperature and load.85
Is my Integra OBD1 or OBD2?
1994-95 Integras are OBD1 and 1996-2001 are OBD2.8
What ECU does the Integra GS-R use?
GS-R ECUs belong to the 37820-P72 part-number family. Check the suffix on the label to identify OBD generation and transmission.6
Can you K-swap a DC2 Integra?
Yes. Hasport's EGK kit lists 94-01 Integra.4
Sources
Numbered as cited above. Hover or tap a citation chip to preview it.
- Timing belts and interference engines · AA1Car Automotive Diagnostic Library (Larry Carley) · press · retrieved 2026-10-25
- Acura Integra Heritage and Milestones · Acura (acuranews.com) · press · retrieved 2026-10-25
- DCSTK B-Series Mount Kit (94-01 Integra) · Hasport Performance · vendor-doc · retrieved 2026-10-25
- EGK K-Series Mount Kit (92-95 Civic, 94-01 Integra, Del Sol) · Hasport Performance · vendor-doc · retrieved 2026-10-25
- Honda VTEC Oil Pressure Switch Tips · NAPA Know How · vendor-doc · retrieved 2026-10-25
- Used Acura Integra Engine Computers (part-number listings) · PartRequest · community · retrieved 2026-10-25
- Darton MID Sleeves B-Series listing · Speed Science (NZ) · vendor-doc · retrieved 2026-10-25
- Honda B engine · Wikipedia · community · retrieved 2026-10-25
Catalog data and evidence
- Catalog data, not yet expert-reviewed.
- No vehicle photos: illustrations only until licensed imagery is available.
- E-911 Haltech S3 adapter harness page (sourced, high confidence)
- E-934 Boomslang identity (sourced, high confidence)
- E-935 Boomslang S3 catalog size (sourced, high confidence)
- E-900 Haltech Nexus S3 catalog (sourced, high confidence)
- E-941 S3 engine harness availability (inferred, medium confidence)
- E-1441 Honda OBD1 ECU codes (reported, low confidence)
- E-1461 Honda OBD2 ECU (secondary-catalogue, medium confidence)



