Factory ECU library
Factory ECU pinouts
25 OEM ECU families, every connector face drawn from published service-manual pin data. Use them to build a plug-and-play or adapter harness, or to check a factory loom.
Our drawings from published pin data; not OEM drawings.
By ECU family
BMW Bosch DME M3.3 (E36 M3 S50B30, Canada, 88-pin)
The Bosch DME M3.3 is the engine control module of the S50B30 six-cylinder in the Canadian-market E36 M3 covered by BMW's 1996 wiring manual. It uses one 88-pin harness connector, X6000, and talks over CAN to a separate VANOS control module. This page transcribes all 88 cavities with function, wire colour and the connector face layout.
- DME connector X6000 (88-pin): 88 cavities, 88 terminals listed
Full connector faces and pin tables: BMW M3 E36 S50 / S52
BMW Siemens MS41.1 DME (E36 328i M52, 88-pin)
The Siemens MS41.1 DME is the engine control module of the M52 six-cylinder in the E36 328i (with the E39 and Z3 M52 cars also on MS41.1 per BMW training). It uses a single 88-pin harness connector, X6000. This page transcribes BMW's 1996 E36 wiring manual: all 88 cavities with function, wire colour and the connector face layout.
- DME connector X6000 (88-pin): 88 cavities, 88 terminals listed
Full connector faces and pin tables: BMW 3 Series E36 325i / 328i (M50 / M52)
GM Gen III LS 24x PCM (2004 Corvette C5 pinout)
The C5 Corvette's Gen III LS1/LS6 powertrain control module (PCM) uses two 80-way connectors, C1 and C2, on a 24x crank trigger with a separate throttle actuator control module. This page transcribes GM's 2004 Corvette PCM connector tables: 160 cavities, each with wire colour, circuit number and function, plus the connector face layout.
- PCM connector C1: 80 cavities, 80 terminals listed
- PCM connector C2: 80 cavities, 80 terminals listed
Full connector faces and pin tables: Chevrolet Corvette C5 Base · Chevrolet Corvette C5 Z06
Honda Civic EK OBD2a ECM/PCM ('96-98)
The 1996-98 US-market Civic (EK) ECM/PCM uses four Honda connectors: A (32P), B (25P, automatic PCM only), C (31P) and D (16P). Honda's service manual prints one shared table for '96-98 D16Y5, D16Y7 and D16Y8 cars and the '99-00 D16Y5 with manual gearbox. 84 terminals are assigned across 104 cavities, with variant footnotes.
- ECM/PCM connector A (32P): 32 cavities, 28 terminals listed
- PCM connector B (25P): 25 cavities, 17 terminals listed
- ECM/PCM connector C (31P): 31 cavities, 23 terminals listed
- ECM/PCM connector D (16P): 16 cavities, 16 terminals listed
Full connector faces and pin tables: Honda Civic EK EX / Si (D16Y8 / B16A2)
Honda Civic EK OBD2b ECM/PCM ('99-00)
The 1999-2000 US-market Civic (EK) ECM/PCM, including the EX (D16Y8) and Si (B16A2), uses the same four Honda housings as 1996-98 but a different pin map: A (32P), B (25P), C (31P) and D (16P, A/T or CVT only). Honda's manual assigns 84 terminals across 104 cavities, footnoted by engine and transmission.
- ECM/PCM connector A (32P): 32 cavities, 24 terminals listed
- ECM/PCM connector B (25P): 25 cavities, 21 terminals listed
- ECM/PCM connector C (31P): 31 cavities, 24 terminals listed
- ECM/PCM connector D (16P): 16 cavities, 15 terminals listed
Full connector faces and pin tables: Honda Civic EK EX / Si (D16Y8 / B16A2)
Honda K-series ECM/PCM, 2002-04 Acura RSX and 2002-03 Civic Si (EP3)
The 2002-04 Acura RSX (K20A2 Type S and K20A3 base) uses a Honda ECM (manual) or PCM (automatic) with connectors A (31P), B (24P) and E (31P) carrying the engine, plus C (22P) and D (17P) on automatic cars for the transmission. The 2002-03 Civic Si (EP3, K20A3) ECM uses the same A, B and E layout with a few cavities unused. That is 125 cavities with all five connectors fitted.
- ECM/PCM connector A (31P): 31 cavities, 27 terminals listed
- ECM/PCM connector B (24P): 24 cavities, 20 terminals listed
- PCM connector C (22P), automatic transmission only: 22 cavities, 16 terminals listed
- PCM connector D (17P), automatic transmission only: 17 cavities, 8 terminals listed
- ECM/PCM connector E (31P): 31 cavities, 25 terminals listed
Full connector faces and pin tables: Acura RSX DC5 Type S (K20A2) · Acura RSX DC5 Base (K20A3) · Honda Civic Si EP3 K20A3
Honda K-series ECM/PCM, 2005-06 Acura RSX (K20Z1 / K20A3)
The 2005-06 Acura RSX (K20Z1 Type S and K20A3 base) uses a Honda ECM (manual) or PCM (automatic) on the same five connector shells as 2002-04 cars, A (31P), B (24P), C (22P), D (17P) and E (31P), but with a re-assigned pinout. C and D are fitted on automatic cars only. 125 cavities in total.
- ECM/PCM connector A (31P): 31 cavities, 26 terminals listed
- ECM/PCM connector B (24P): 24 cavities, 14 terminals listed
- PCM connector C (22P), automatic transmission only: 22 cavities, 17 terminals listed
- PCM connector D (17P), automatic transmission only: 17 cavities, 6 terminals listed
- ECM/PCM connector E (31P): 31 cavities, 25 terminals listed
Full connector faces and pin tables: Acura RSX DC5 Type S (K20Z1) · Acura RSX DC5 Base (K20A3)
Honda OBD1 PGM-FI ECU (1992-95 Civic, 1994-95 Integra)
The 1992-95 Honda Civic and 1994-95 Acura Integra use a PGM-FI ECU (often called OBD1, e.g. P28, P72) with three harness plugs: A (26 cavities), B (16) and D (22), 64 cavities in all. A carries injectors, ignition output, relays and grounds; B carries power, distributor TDC/crank/cylinder pickups and switches; D carries sensors, 5 V supplies and diagnostics.
- ECU connector A (C410 on 1994 Integra): 26 cavities, 26 terminals listed
- ECU connector B (C408 on 1994 Integra): 16 cavities, 16 terminals listed
- ECU connector D (C409 on 1994 Integra): 22 cavities, 22 terminals listed
Full connector faces and pin tables: Honda Civic EG Si / VTi (D16Z6 / B16A) · Acura / Honda Integra DC2 GS-R / VTi-R · Acura Integra DC2 LS / RS (B18B)
Lexus IS300 2JZ-GE VVT-i ECM (2001-2005, US)
The 2001-05 Lexus IS300 (2JZ-GE VVT-i, drive-by-wire) uses one ECM that also runs the A/T. Toyota changed it after 2001: the 2001 ECM has six plugs, E2 to E7 (148 cavities), and the 2002 ECM has five denser plugs, E3 to E7 (167 cavities), with different terminal numbers. Both are listed here from the Lexus repair manuals and wiring diagrams.
- 2001 ECM connector E2: 26 cavities, 10 terminals listed
- 2001 ECM connector E3: 22 cavities, 16 terminals listed
- 2001 ECM connector E4: 28 cavities, 19 terminals listed
- 2001 ECM connector E5: 17 cavities, 16 terminals listed
- 2001 ECM connector E6: 24 cavities, 24 terminals listed
- 2001 ECM connector E7: 31 cavities, 27 terminals listed
- 2002-05 ECM connector E3: 31 cavities, 19 terminals listed
- 2002-05 ECM connector E4: 35 cavities, 32 terminals listed
- 2002-05 ECM connector E5: 32 cavities, 17 terminals listed
- 2002-05 ECM connector E6: 35 cavities, 25 terminals listed
- 2002-05 ECM connector E7: 34 cavities, 22 terminals listed
Full connector faces and pin tables: Lexus IS300 / GS300 XE10 / S160 2JZ-GE
Mazda MX-5 Miata NA 1.6 (B6) engine control unit, 1990-93 US / Canada
The 1990-93 Mazda MX-5 Miata 1.6 (B6) uses a Mazda E.G.I. engine control unit behind the passenger footwell with two harness connectors: connector 1 (22 cavities, 1A-1V) and connector 2 (26 cavities, 2A-2Z), 48 in all. It runs a vane airflow meter, Ne and G crank angle signals, paired injectors and two igniter channels. This page transcribes Mazda's terminal table, face layout and wire colours.
- ECU connector 1 (terminals 1A-1V): 22 cavities, 22 terminals listed
- ECU connector 2 (terminals 2A-2Z): 26 cavities, 26 terminals listed
Full connector faces and pin tables: Mazda MX-5 Miata NA B6 / BP
Mitsubishi Eclipse / Eagle Talon / Plymouth Laser 1G 4G63T engine control unit (ECU)
The 1G DSM turbo ECU is the engine computer of the 1990-94 Eclipse GS Turbo/GSX, Talon TSi and Laser RS Turbo with the 4G63T. It has three connectors on the ECU, C-64, C-65 and C-66, with 52 cavities numbered 1-24, 51-68 and 101-110. Pins here come from the 1990 terminal table and the 1991 turbo wiring diagrams.
- ECU connector C-66 (terminals 1-24): 24 cavities, 24 terminals listed
- ECU connector C-65 (terminals 51-68): 18 cavities, 18 terminals listed
- ECU connector C-64 (terminals 101-110): 10 cavities, 10 terminals listed
Full connector faces and pin tables: Mitsubishi Eclipse / Talon (DSM) 1G 4G63T
Mitsubishi Eclipse / Eagle Talon 2G 4G63T engine control module (ECM)
The 2G DSM turbo ECM is the engine computer of the 1995-99 Eclipse GST/GSX and Talon TSi with the 4G63T. The 1997 service manual shows four ECM connectors, B-53 to B-56, with 76 cavities numbered 1-26, 31-46, 51-62 and 71-92. This page transcribes the 1997 turbo terminal chart and circuit diagrams; 1995-96 cars are not yet checked.
- ECM connector B-53 (terminals 1-26): 26 cavities, 26 terminals listed
- ECM connector B-54 (terminals 31-46): 16 cavities, 16 terminals listed
- ECM connector B-55 (terminals 51-62): 12 cavities, 12 terminals listed
- ECM connector B-56 (terminals 71-92): 22 cavities, 22 terminals listed
Full connector faces and pin tables: Mitsubishi Eclipse / Talon (DSM) 2G 4G63T
Mitsubishi Lancer Evolution IV-VI engine-ECU (4G63T)
The Mitsubishi Lancer Evolution IV-VI engine-ECU (4G63T) uses 1 connector with 76 cavities. This page draws each face from the OEM figure and lists the 51 terminals the OEM table documents, with wire colours where the manual prints them.
- Engine-ECU connectors B-59 to B-62, Lancer Evolution IV-VI: 76 cavities, 51 terminals listed
Full connector faces and pin tables: Mitsubishi Lancer Evolution IV-VI 4G63T
Mitsubishi Lancer Evolution VII-IX ECM (4G63T), USDM Evo VIII
The Mitsubishi Lancer Evolution VII-IX ECM (4G63T), USDM Evo VIII uses 1 connector with 76 cavities. This page draws each face from the OEM figure and lists the 58 terminals the OEM table documents, with wire colours where the manual prints them.
- ECM connectors C-121, C-119, C-117, C-115, Lancer Evolution VIII: 76 cavities, 58 terminals listed
Full connector faces and pin tables: Mitsubishi Lancer Evolution VII-IX 4G63T
Nissan 200SX SE-R (B14) SR20DE ECM F25, 1997 US
The Nissan 200SX SE-R (B14) SR20DE ECM F25, 1997 US uses 1 connector with 88 cavities. This page draws each face from the OEM figure and lists the 57 terminals the OEM table documents, with wire colours where the manual prints them.
- ECM harness connector F25, 1997 200SX SE-R (SR20DE): 88 cavities, 57 terminals listed
Full connector faces and pin tables: Nissan Sentra SE-R B13 / B14 SR20DE
Nissan 240SX (S13) KA24DE ECM, 1991-94 US
The Nissan 240SX (S13) KA24DE ECM, 1991-94 US uses 1 connector with 64 cavities. This page draws each face from the OEM figure and lists the 34 terminals the OEM table documents, with wire colours where the manual prints them.
- ECM harness connector, 240SX S13 (KA24DE): 64 cavities, 34 terminals listed
Full connector faces and pin tables: Nissan 240SX S13 / S14 KA24DE
Nissan 240SX (S14) KA24DE ECM, 1997 US
The Nissan 240SX (S14) KA24DE ECM, 1997 US uses 1 connector with 88 cavities. This page draws each face from the OEM figure and lists the 74 terminals the OEM table documents, with wire colours where the manual prints them.
- ECM harness connector, 240SX S14 (KA24DE, 1997): 88 cavities, 74 terminals listed
Full connector faces and pin tables: Nissan 240SX S13 / S14 KA24DE
Nissan Silvia (S15) SR20DET ECM
The Nissan Silvia (S15) SR20DET ECM uses 1 connector with 64 cavities. This page draws each face from the OEM figure and lists the 54 terminals the OEM table documents, with wire colours where the manual prints them.
- ECM harness connector, S15 (SR20DET): 64 cavities, 54 terminals listed
Full connector faces and pin tables: Nissan Silvia S15 SR20DET
Nissan Silvia / 200SX (S14) SR20DET ECM, 1994 LHD export
The Nissan Silvia / 200SX (S14) SR20DET ECM, 1994 LHD export uses 1 connector with 76 cavities. This page draws each face from the OEM figure and lists the 30 terminals the OEM table documents, with wire colours where the manual prints them.
- ECM harness connector, S14 SR20DET (1994 LHD export): 76 cavities, 30 terminals listed
Full connector faces and pin tables: Nissan Silvia / 200SX S14 SR20DET
Nissan Skyline (R33) RB25DE / RB25DET ECCS control unit
The Nissan Skyline (R33) RB25DE / RB25DET ECCS control unit uses 1 connector with 76 cavities. This page draws each face from the OEM figure and lists the 63 terminals the OEM table documents, with wire colours where the manual prints them.
- ECCS control unit connector, R33 (RB25DE / RB25DET): 76 cavities, 63 terminals listed
Full connector faces and pin tables: Nissan Skyline GTS-t R33 RB25DET
Nissan Skyline (R34) 104-pin ECM(-TCM), RB20DE / RB25DE / RB25DET NEO
The Nissan Skyline (R34) 104-pin ECM(-TCM), RB20DE / RB25DE / RB25DET NEO uses 1 connector with 104 cavities. This page draws each face from the OEM figure and lists the 88 terminals the OEM table documents, with wire colours where the manual prints them.
- ECM(-TCM) connector, R34 (RB20DE / RB25DE / RB25DET): 104 cavities, 88 terminals listed
Full connector faces and pin tables: Nissan Skyline 25GT-t R34 RB25DET NEO
Nissan Skyline GT-R (BNR32) RB26DETT ECCS control unit
The Nissan Skyline GT-R (BNR32) RB26DETT ECCS control unit uses 1 connector with 76 cavities. This page draws each face from the OEM figure and lists the 63 terminals the OEM table documents, with wire colours where the manual prints them.
- ECCS control unit connector, R32 GT-R (RB26DETT): 76 cavities, 63 terminals listed
Full connector faces and pin tables: Nissan Skyline GT-R R32 RB26DETT
Subaru Impreza WRX (GD/GG) EJ205 ECM, 2002 USDM
The 2002 US-market Impreza WRX (GD/GG, EJ205 turbo) engine control module uses five harness connectors: A (B134, 22 cavities), B (B135, 28), C (B136, 24), D (B137, 31) and a turbo-only E (B84, 17), 122 cavities in all. Subaru's wiring manual shows 85 terminals wired, with wire colours, covering injectors, coils, VR crank and cam inputs, TGV, wastegate and the A/T link.
- ECM connector A (B134): 22 cavities, 22 terminals listed
- ECM connector B (B135): 28 cavities, 28 terminals listed
- ECM connector C (B136): 24 cavities, 24 terminals listed
- ECM connector D (B137): 31 cavities, 31 terminals listed
- ECM connector E (B84, turbo only): 17 cavities, 17 terminals listed
Full connector faces and pin tables: Subaru Impreza WRX GD / GG EJ205
Toyota Supra (A80) 2JZ-GE ECM, 1997 US (OBD-II)
The Toyota Supra (A80) 2JZ-GE ECM, 1997 US (OBD-II) uses 2 connectors with 120 cavities. This page draws each face from the OEM figure and lists the 55 terminals the OEM table documents, with wire colours where the manual prints them.
- ECM connector E10 (A), 2JZ-GE 1997 US: 40 cavities, 15 terminals listed
- ECM connector E9 (B), 2JZ-GE 1997 US: 80 cavities, 40 terminals listed
Full connector faces and pin tables: Toyota Supra MK4 A80 NA (2JZ-GE)
Toyota Supra (A80) 2JZ-GTE ECM, 1995 US (non-VVT-i)
The Toyota Supra (A80) 2JZ-GTE ECM, 1995 US (non-VVT-i) uses 2 connectors with 120 cavities. This page draws each face from the OEM figure and lists the 63 terminals the OEM table documents, with wire colours where the manual prints them.
- ECM connector E10 (A), 2JZ-GTE 1995 US: 40 cavities, 13 terminals listed
- ECM connector E9 (B), 2JZ-GTE 1995 US: 80 cavities, 50 terminals listed
Full connector faces and pin tables: Toyota Supra MK4 A80 Turbo (2JZ-GTE, non-VVT-i)

