Engine: LS3 / L99
- None
- L99 cam phaser + AFM
Part of the GM LS (Gen III / IV) family.
Modeled power and torque
Modelled estimate, not a dyno result.
Modeled estimate, not a dyno measurement. Real results vary with fuel, weather, dyno type and build.
Stock is anchored to the factory rating (430 hp at 5900 rpm, 424 lb-ft at 4600 rpm); the curve shape between peaks is modeled. Intake + exhaust + tune (pump fuel): Typical NA gains come mostly above mid-rpm.
LS3 / L99 data
- Load sensing
- MAF+MAP (blended / torque model)
- O2 sensor
- Not yet sourced
- Closed loop
- Not yet sourced
- Block
- aluminium (updated LS2 casting)
- Rods / pistons
- powder-forged steel · hypereutectic, flat-top
- Reported limit
- Not yet sourced
- Factory
- Gen IV "LS3 style" short injector, EV6 USCAR (EV14-class) · 441 cc/min
- Impedance
- high (saturated)
- Direct-fit upgrades
- 5 maker-listed
- Knock
- GM 12623730 (repl 12570125; superseded by 12739206)
- MAP / MAF
- GM 55573248 (repl 12591290, 93192107)
- O2 (upstream)
- GM 12617332 (2009-13 Corvette, 2010-15 Camaro front) | GM 12581966 (2005-13 Corvette front)
Platform background
The Gen IV LS cars: the C6 Corvette (LS2 2005-07, LS3 2008-13, LS7 Z06, LS9 ZR1), the fifth-generation Camaro SS (LS3 manual, L99 automatic with AFM, LSA in the ZL1) and the Holden-built Pontiac G8 (L76 GT, LS3 GXP). Early LS2 cars use the E40 with integrated electronic throttle control. 58x cars use CAN-based E38/E67 controllers with separate transmission control on 6L80/6L90 automatics.
Factory ECU
- E40-family controller with all electronic throttle functions integrated (no separate TAC module)
- Some early LS2 engines are 24x with a front-cover cam sensor
Recalibrating the E38/E67 is the normal path on these cars. They are CAN-networked, so the cluster, ABS/stability control and transmission all depend on ECM messages. A standalone controller needs a CAN strategy for those functions.
Factory ECU: harness cross-reference
From the factory ECU each listed harness plugs into. The factory ECU is unplugged, not modified. Check the label and part number on your own ECU before ordering.
- ECU family
- GM E38
- Applies to
- 2010-15 Camaro SS L99 6.2; automatic
- Not for
- LS3 manual (BF29996-S3); LSA/ZL1
E38 covers 2006-14 58X LS 6.2; separate TCM. L99 adds VVT/AFM vs LS3.
- ECU family
- GM E38
- Applies to
- 2010-15 Camaro LS3 (and LS7 Z/28); manual
- Not for
- L99 automatic
Factory ECU pinout: pending
No OEM pin table is in our library yet for the LS3 / L99 factory ECU. No OEM-grade public pinout was found. Needed: the GM service manual Engine Controls / Wiring Systems section for this vehicle and year, giving the PCM/ECM connector end views and terminal tables. Specifically the 2005-2013 Corvette, 2010-2015 Camaro and 2008-2009 Pontiac G8 service manuals, E38/E67 ECM connector terminal tables. Until then, wire from the harness maker's instructions or the factory service manual.
Factory ECU pinout
No OEM-grade public pinout was found. Needed: the GM service manual Engine Controls / Wiring Systems section for this vehicle and year, giving the PCM/ECM connector end views and terminal tables. Specifically the 2005-2013 Corvette, 2010-2015 Camaro and 2008-2009 Pontiac G8 service manuals, E38/E67 ECM connector terminal tables.
Plug-and-play harness
No Haltech S3 plug-in harness is listed for this vehicle, but a Boomslang adapter harness is: it plugs into the factory ECU connector on one side and the S3 pinout on the other, so the ECU2 replaces the factory ECU without cutting the loom. Nothing is written to the factory ECU. Pin-compatible per the published S3 pinout, not yet fit-tested.
| Maker | Harness | Fits | Link | |
|---|---|---|---|---|
![]() | Auto 2010 - 2015 Chevrolet Camaro L99BF29995-S3 | 2010-15 Camaro SS L99 6.2; automatic | $1,445Lowest | Maker ↗ |
![]() | Manual 2010 - 2015 Chevrolet Camaro LS3BF29996-S3 | 2010-15 Camaro LS3 (and LS7 Z/28); manual | $1,445Lowest | Maker ↗ |
| Wire-in | Universal flying lead or re-terminated factory harness | Any engine (terminate to ECU2's two Superseal 34 connectors) | Universal harness from $405 | Maker ↗ |

Boomslang plug-and-play harness for Haltech Nexus S3 - Auto 2010 - 2015 Chevrolet Camaro L99
- Plugs into
GM E38 ECM (2010-15 Camaro SS L99)
- ECU
- GM E38
- Confidence
- medium
E38 covers 2006-14 58X LS 6.2; separate TCM. L99 adds VVT/AFM vs LS3.
Sources: E-1454
- Fits
- 2010-15 Camaro SS L99 6.2; automatic
- Exclusions
- LS3 manual (BF29996-S3); LSA/ZL1
- SKU
- BF29995-S3
- Maker fitment
- Chevrolet Camaro L99 (Auto); selector years 2010-2015; SKU label: Auto 2010 - 2015 Chevrolet Camaro L99
- Maker notes
- separate SKUs exist for other Nexus models (-S2/-R3/-R5/-T1/-T2); L99 auto

Boomslang plug-and-play harness for Haltech Nexus S3 - Manual 2010 - 2015 Chevrolet Camaro LS3
- Plugs into
- Fits
- 2010-15 Camaro LS3 (and LS7 Z/28); manual
- Exclusions
- L99 automatic
- SKU
- BF29996-S3
- Maker fitment
- Chevrolet Camaro LS3; Chevrolet Camaro LS7 (Manual); selector years 2010-2015; SKU label: Manual 2010 - 2015 Chevrolet Camaro LS3
- Maker notes
- separate SKUs exist for other Nexus models (-S2/-R3/-R5/-T1/-T2); LS3 manual
Haltech and Boomslang are trademarks of their respective owners. GAINS is not affiliated with or endorsed by them.
Your GAINS system for this car · pre-release
ECU2 for the Camaro 5th gen
Planned with the same rules as the configurator for this car's 8 cyl · port injection · drive-by-wire. The factory ECU is unplugged and replaced; nothing is written to it.

- Price TBA
ECU2Engine controller
8 cyl · port injection · drive-by-wire
Full sequential fuel and spark for this 8-cylinder, and its electronic throttle, with the wideband built in.
in designEst. availability: April 2027
Add PDM2 to switch and protect chassis loads (pumps, fans, lights, accessories). Add it in the configurator →
Track days? Add the Telemetry Dongle Pro for 25 Hz GPS lap timing; it plugs into the OBD-II port, and your phone is the dash. Plan it in the configurator →
What you get
- A screen on the ECUA 2.4-inch, 500-nit display in the lid, readable in a footwell.
- Faults in plain words"Coolant temp sensor open circuit.
- Drive-by-wire built inFour half-bridges run up to two electronic throttles, with pedal and throttle sensors on the ECU's own inputs and a windowed watchdog that cuts the motors in hardware on a fault.
- S3-style harnessesConnector A and C pin functions follow the published Nexus S3 wiring diagram.
- Powered CAN portA sealed 4-pin port on the insert carries 12 V and CAN for the PDM2 and GAINS displays: one cable per accessory.
- GAINS insideThe on-ECU adaptive layer, the app, logging and your limits.
How it wires in
- Haltech S3 plug-in harnessNone listed for this car
- Factory-connector → S3 adapter2 listed · from $1,445 USD listBF29995-S3
- Wire-inAlways possible
Pin-compatible per the published S3 pinout, not yet fit-tested. Every harness option for this car ↓
ECU2 is in design; specifications may change. All GAINS hardware is pre-release concept design; nothing is for sale yet and no application is validated on a vehicle. Harness fitment is from published pinouts and not yet fit-tested.
Swap guides
The LS3 / L99 family in other cars
How GAINS approaches the Camaro 5th gen
Our starting method for this engine, as foundations first: get it running and drivable, then learn fuel, then the hardware-specific strategies. It is a methodology outline, not a validated calibration.
- 1Base map and first startplanned
Start from displacement, injector data and the sensors fitted, then let the first-start learner settle cranking, idle and warm-up before any load work. The goal is a safe, running engine, not a finished calibration.
- 2Lambda targets and VE learningclosed loop on GAINS ECUs
Air-fuel targets come from your goal (street, track, economy). The ECU then learns its fuel table cell by cell from the onboard wideband inside a signed envelope, and you approve promoting what it learned into the base map.
- 3Cam phasing (VVT)gated
Begin with conservative overlap. Cam targets per load cell are then chosen with torque and knock in mind, keeping idle and cold overlap low for stability. Widening cam authority follows the same evidence-gated path as spark.
- 4Cylinder deactivationbuild choice
AFM / DFM / MDS / VCM is disabled in the build, with the lifter and valley-plate work the engine's guidance calls for.
- 5Drivability foundationsplanned
Pedal map, tip-in and decel fuel, idle control, cold start and warm-up enrichment: the tables tuners spend hours on after the main map. Each is a strategy in the knowledge engine with its own limits.
- 6Factory load sensingfactory reference
What the factory ECU measures load with: MAF+MAP (blended / torque model) (medium confidence)
- 7Wideband sensorhardware
factory O2 type not yet sourced; plan on a Bosch LSU 4.9 for the GAINS ECU's built-in controller
- 8Bottom end and head sealingfactory reference
Reported: Commonly reported that the powder-metal rods and hypereutectic pistons are the first limits under boost. (medium confidence) Limits depend on tune quality, fuel, rpm and condition and are not guaranteed.
Drivetrain
Chassis integration
The G8 is a rebadged Holden VE Commodore built in Elizabeth, South Australia, on the Zeta platform shared with the fifth-generation Camaro
Low confidence11Zeta-platform cars (Camaro, G8, VE Commodore) share much of their electrical architecture. Calibration and swap knowledge often transfers between them, but confirm the ECM operating system and the CAN messages for each model.
Tuning notes
L99 runs 10.4:1 compression with AFM and is rated 400 hp against the LS3's 426 hp in the same car
Sourced6GM acknowledged a supplier valve-guide machining issue on a small number of 2009-11 Z06 heads
Sourced · medium7On L99 and L76 cars, decide early whether to keep AFM. Cam swaps usually mean removing the AFM lifters and disabling AFM and the associated diagnostics. LS7 owners planning more cam or rpm should check valve guides first.
Popular swaps
Other Camaro 5th gen guides
GAINS on the Camaro 5th gen
ECU2
Designed so your phone is the laptop, keypad and dash
The GAINS app is designed to handle tuning, logging, gauges and switch inputs over Bluetooth, so the system needs no separate CAN keypad or display. Keypad, dash and logging views are planned; the iOS prototype runs on simulated data today.
Wideband, IMU and logging built in
An onboard Bosch LSU 4.9 wideband controller, a 6-axis IMU and onboard logging are designed into the ECU rather than sold as add-on modules.
Modular, so you buy what the engine needs
This engine runs on ECU2. PDM2 (power, body and gearbox) is optional and connects over ECU2's powered CAN port; the Telemetry Dongle Pro adds GPS lap timing from the OBD-II port.
Calibration that keeps learning
Instead of a fixed map that drifts as parts and conditions change, the ECU keeps adapting its fuel trims within limits you can see and approve in the app.
Adaptive tuning strategies
- VE learning closed loop on GAINS ECUs
Learns the fuel table from the onboard wideband as you drive, cell by cell, inside a signed authority envelope. Learned trims are promoted into the base map without a step in fuelling.
- Goal-based lambda targets closed loop on GAINS ECUs
Sets air-fuel targets from your goal (economy, response, power, safety margin) instead of a single fixed table.
- Knock protection protection
Listens for knock on a dedicated knock processor, pulls timing at once and restores it slowly. It only ever reduces advance.
- Warm-up, cranking, idle and transient fuel planned
The same learning approach applied to the tables tuners spend hours on after the main map is done.
- Spark advance and boost authority gated
Widening ignition advance or boost is never automatic. It stays an expert or dyno decision until validated knock detection exists for the engine family.
Already running another ECU? In advisor mode the same strategies read your logs and recommend exact table changes with the reasoning, which you apply in your ECU vendor's own software.
GAINS hardware is pre-release concept design. Simulated results only; nothing is validated on a vehicle yet.
Frequently asked
What ECU is in a 2010 Camaro SS?
A Gen IV CAN-based ECM from the E38 family, with transmission control in the 6L80 on automatic cars.38
What is the difference between the LS3 and L99?
The L99 is the automatic Camaro's 6.2 with Active Fuel Management and 10.4:1 compression (400 hp). The manual car's LS3 has 10.7:1 and no AFM (426 hp).65
Does the 2005 C6 LS2 have a TAC module?
No. Its controller integrates all electronic throttle control functions.1
What engine is in the Pontiac G8 GT?
The 6.0 L76 with Active Fuel Management, paired with a 6L80 automatic. The GXP has the LS3.11
Is the LS7 valve guide issue real?
GM confirmed a supplier machining error affecting a small number of 2009-11 Z06 heads, contained by February 2011. Wider guide-wear claims were the subject of a later class action.7
Sources
Numbered as cited above. Hover or tap a citation chip to preview it.
- C6, Naked and Exposed: First Look at the 2005 Corvette (page 4) · Corvette Action Center · press · retrieved 2026-10-25
- Press Release: 2006 Corvette Z06 LS7: The Largest, Most Powerful Small-Block Ever Built · General Motors (via Corvette Action Center) · oem · retrieved 2026-10-25
- LS Engine Controllers, Making Your LS-Power Change A Controlled Swap · Chevy Hardcore · press · retrieved 2026-10-25
- Dialing In LS Sensors For Various Generations With Michigan Motorsports · EngineLabs · press · retrieved 2026-10-25
- A new classic - The LS3 · GM Specialty Vehicles · oem · retrieved 2026-10-25
- OFFICIAL 2010 Camaro Specifications Fully Released by GM · LSX Magazine · press · retrieved 2026-10-25
- C6 Corvette Owners File Class Action Suit Over LS7 Engine · LSX Magazine · press · retrieved 2026-10-25
- 24x vs 58x Reluctor Differences for LS and LT · PSI Conversion · vendor-doc · retrieved 2026-10-25
- PCM-1012 LSA E67 programming · PSI Conversion · vendor-doc · retrieved 2026-10-25
- Differences and Applications of GM ECMs (Gen III, IV and V) · The Tuning School · community · retrieved 2026-10-25
- Pontiac G8 · Wikipedia · community · retrieved 2026-10-25
Catalog data and evidence
- Catalog data, not yet expert-reviewed.
- No vehicle photos: illustrations only until licensed imagery is available.
- E-934 Boomslang identity (sourced, high confidence)
- E-935 Boomslang S3 catalog size (sourced, high confidence)
- E-900 Haltech Nexus S3 catalog (sourced, high confidence)
- E-941 S3 engine harness availability (inferred, medium confidence)
- E-1454 GM E38/E67 (supported, medium confidence)



