GM LS (Gen III / IV) · 2008-17

LS3 horsepower: specs, firing order, injectors, swaps and sensors

The LS3 / L99 is a naturally aspirated 6.2 L V8 engine from GM (2008-17) with port fuel injection and coil-on-plug ignition. Its firing order is 1-8-7-2-6-5-4-3. The factory ECU measures load by MAF+MAP. Below: factory specification and ratings, sensor part numbers, OEM injectors and direct-fit upgrades, triggers, swaps and tuning notes, each with its evidence.Medium122223391058 Conflict

Power: 430 hp @ 5,900 rpm · Torque: 424 lb-ft (575 Nm) @ 4,600 rpm (GM rating, not a GAINS measurement)Medium1222

Factory specification

Layout, dimensions and factory hardware, each with its source.

Production years2008-17Catalog range across the variants on this page.Researched, unverified
Displacement6.2L6,162 cc from bore × strokeConflict1222
LayoutV8Researched, unverified
Bore × stroke103.25 × 92mm4.06 × 3.62 inConflict1222
Compression ratio10.7:1Conflict1222
Redline6,600rpmConflict1222
Aspirationnaturally aspiratedResearched, unverified
Recommended fuelpremiumCorvsport 2008 spec lists 93 octaneConflict1222
Fuel injectionport fuel injectionSourced · medium91058
Blockaluminiumupdated LS2 castingSourced · medium42124
Cylinder liners
  • Cast-in ironfamily
  • Thicker cylinder walls than the LS7 block (reason the LS9 uses the LS3 block)
Sourced · medium42124
Main caps6-bolt cross-boltedfamilySourced · medium42124
Connecting rodspowder-forged steelSourced · medium42124
Pistonshypereutectic, flat-topSourced · medium42124

Facts tagged “Researched, unverified” come from our engine catalog without a cited source yet.

LS3 horsepower and torque

Ratings as the manufacturer published them, with their basis. They are not GAINS measurements or tuning results.

Power (GM rating)430hp @ 5,900 rpm2008-13 C6 Corvette LS3, SAE certified, standard exhaust. Redline 6600 per Wikipedia (hollow-stem valves); Corvsport spec sheet says 6500 max rpm and 430 @6000 / 424 @4400 - conflict.Conflict1222
Torque (GM rating)424 lb-ft @ 4,600 rpm575 NmConflict1222
Other published ratings
  • Corvette w/ dual-mode exhaust: 436 hp / 428 lb-ft
  • Camaro SS LS3 (manual, 2010-15): 426 hp / 420 lb-ft
  • L99 (Camaro SS auto 2010-15, AFM+VVT, CR 10.4): 400 hp @5900 / 410 lb-ft @4300
  • HSV LS3: 425 then 436 bhp
  • Redline conflict 6600 (Wikipedia) vs 6500 (Corvsport)
Conflict1222

LS3 firing order

The order the cylinders fire in, with the cylinder numbering the source states.

  1. 1
  2. 8
  3. 7
  4. 2
  5. 6
  6. 5
  7. 4
  8. 3
  9. Medium23Sourced · medium
FRONTLeft (driver) bank11385673Right (passenger) bank24476582
Top view, front of the engine at the top. Small badges show each cylinder's place in the firing sequence. Numbered front to back: odd cylinders on the left (driver-side in a left-hand-drive car) bank, even on the right.

LS3 injectors

The factory injector, then direct-fit upgrades the makers list for this engine.

Factory injector

StyleGen IV "LS3 style" short injector, EV6 USCAR (EV14-class)Sourced · medium91058
OEM part numbers12576341Sourced · medium91058
Flow441cc/minconverted from 42 lb/hr @ 58 psiSourced · medium91058
ImpedancehighsaturatedSourced · medium91058
ConnectorEV6 / USCARSourced · medium91058
Lengthshort1.5 in between O-rings; ID code 34 mmSourced · medium91058
FeedtopSourced · medium91058
O-ring OD (top / bottom)14/ 15 mmSourced · medium91058

Direct-fit upgrades

Sets the maker lists for this engine. Fit is the maker’s own statement; flow is the maker’s rating and test basis.

InjectorFlowFit
Fuel Injector Clinic (FIC) FIC 540cc High-Z injector set · IS303-0540H25540 cc/min cc/min @ 3 bar (43.5 psi), CF-16B calibration fluid, 90 F (maker rating)Plug-in
Fuel Injector Clinic (FIC) FIC 1000cc High-Z injector set · IS303-1000H251000 cc/min cc/min @ 3 bar (43.5 psi), CF-16B calibration fluid, 90 F (maker rating)Plug-in
Injector Dynamics ID1050-XDS (set) · 1050.34.14.15.851114161065 cc/min cc/min @ 3.0 bar (43.5 psi), gasoline at 52 C (maker spec)Plug-in
Injector Dynamics ID1300-XDS (set) · 1300.34.14.15.861215171335 cc/min cc/min @ 3.0 bar (43.5 psi), iso-octane at 52 C (maker spec)Plug-in
Injector Dynamics ID1750-XDS (set) · 1750.34.14.15.8713151728 cc/min cc/min @ 3.0 bar (43.5 psi), E10 cert fuel at 49 C (maker spec)Plug-in

LS3 swap

Swap guides that recommend this engine or its family. Each guide covers mounts, transmission, fuel, wiring, tuning and the law, with sources.

LS + BMW M DCT swap guideAn LS with a BMW M DCT (GS7D36SG) in an E36 is a niche, fabrication-heavy swap.Recommends the LS3 · difficulty 5/5E30 LS SwapAn E30 LS swap is an established but fabrication-heavy V8 conversion: mount kits and a few complete kits exist, but builders still solve an oil pan that clears the front subframe and steering rack, brake booster space at the firewall, a T56 or adapted BMW gearbox, and a rear differential and trailing-arm rear built for six cylinders.Recommends the LS3 · difficulty 4/5LS Swap BMW E36An E36 LS swap is a popular V8 conversion with complete kits that include mounts, headers, a transmission crossmember, a driveshaft and a collapsible steering shaft.Recommends the LS3 · difficulty 3/5LS Swap BMW E46An E46 LS swap is less common than the E36 version because the E46 runs engine data to the cluster and stability system over CAN bus.Recommends the LS3 · difficulty 4/53rd Gen Camaro LS Swap (1982-92)A 3rd gen Camaro LS swap is a common, well-supported conversion for 1982-92 Camaros and Firebirds.Recommends the LS3 · difficulty 3/5C4 Corvette LS Swap (1984-96)An LS swap C4 Corvette build is well known but less turnkey than a G-body or Camaro.Recommends the LS3 · difficulty 4/5G-Body LS Swap (1978-88)An LS swap G body build is one of the best-supported V8 conversions: bolt-in mount brackets, crossmembers, pans and headers exist for the 1978-88 cars.Recommends the LS3 · difficulty 2/5OBS LS Swap (1988-1998 C/K, Tahoe, Yukon, Suburban)An OBS LS swap is a natural fit because the 1988-1998 GMT400 trucks came with small-block V8s, so bolt-in adapter mounts and crossmembers exist for 2WD and 4WD.Recommends the LS3 · difficulty 2/5S10 LS Swap (1982-2004)An LS swap S10 build is one of the best-supported V8 truck conversions, but the parts come as matched systems.Recommends the LS3 · difficulty 3/5240Z LS SwapA 240Z LS swap is one of the best-supported V8 conversions for the S30, with mount, crossmember and transmission-mount kits from several makers.Recommends the LS3 · difficulty 3/5Fox Body LS Swap (1979-93)An LS swap into a Fox body Mustang is a well-supported conversion, with brackets, swap K-members, headers and crossmembers sold for 1979-93 cars.Recommends the LS3 · difficulty 3/5Ford Ranger LS Swap (1983-2011)A Ford Ranger LS swap is possible but is a fabrication job: we found no current bolt-in LS mount kit for 1983-2011 Rangers, so builds use universal weld-in mounts.Recommends the LS3 · difficulty 4/5G35 LS Swap (V35, 2003-2007)A G35 LS swap borrows most hardware from the 350Z, since both share Nissan's FM platform, and Sikky and LOJ sell kits for the G35 sedan and coupe.Recommends the LS3 · difficulty 3/5Jeep Wrangler LS Swap (TJ 1997-2006 and JK 2007-2018)The LS swap Jeep Wrangler owners most often do is the 1997-2006 TJ, which has mature mount, adapter and fuel kits.Recommends the LS3 · difficulty 4/5LS Swap NA MiataAn LS swap Miata is a well-known but fabrication-heavy conversion.Recommends the LS3 · difficulty 4/5LS Swap RX-7 (FD)An LS swap RX-7 (FD) is a long-established conversion that replaces the 13B-REW rotary with a GM V8, usually with a T56-family six-speed.Recommends the LS3 · difficulty 4/5RX-8 LS Swap (SE3P, 2004-2011 US)An RX8 LS swap is well documented but more involved than most Mazda swaps, with kits from Hinson, V8 Roadsters, CXRacing and LS1RX8.com.Recommends the LS3 · difficulty 4/5LS Swap 240SX (S13)An LS swap 240SX is one of the most common V8 conversions for the S13, backed by bolt-in mount, oil pan, driveshaft and header kits.Recommends the LS3 · difficulty 3/5300ZX LS Swap (Z32, 1990-1996)A 300ZX LS swap is a well-supported conversion for the 1990-1996 Z32, with bolt-in mounts, oil pans and gearbox adapters from LOJ Conversions and G Force.Recommends the LS3 · difficulty 3/5350Z LS Swap (Z33)A 350Z LS swap is a well-supported V8 conversion for the Z33, with bolt-in mount kits, swap oil pans, headers and plug-in harnesses on the market.Recommends the LS3 · difficulty 3/5944 LS Swap (1982-91)A 944 LS swap is an established V8 conversion for the 1982-91 Porsche 944, supported by kits with mounts, an oil pan, headers and a bellhousing-to-torque-tube adapter.Recommends the LS3 · difficulty 4/5Subaru BRZ / Scion FR-S / Toyota 86 LS Swap (2013-2020)An LS swap BRZ, FR-S or 86 is an established but advanced build with bolt-in mount, oil pan, header and driveshaft kits from Sikky and an ICT Billet mount kit.Recommends the LS3 · difficulty 4/5Tacoma LS Swap (1995-2004)A Tacoma LS swap is a known but less kit-supported conversion for the 1995-2004 truck.Recommends the LS3 · difficulty 4/5Volvo 240 LS Swap (1975-93)An LS swap into a Volvo 240 is a known but fabrication-heavy conversion: few bolt-in parts are sold, and builders typically make or adapt mounts, the transmission crossmember and exhaust.Recommends the LS3 · difficulty 4/5LS Swap C10 Square Body (1973-87)An LS swap C10 puts a GM Gen III/IV LS V8 (most often a junkyard 5.3 or 6.0 truck engine) or a Gen V LT into a 1973-87 square-body truck, and bolt-in mounts, swap oil pans, headers and crossmembers are sold for both.Recommends the LS3 · difficulty 3/5Jeep Cherokee XJ LS Swap (1984-2001)A Jeep XJ LS swap is an established conversion with a bolt-and-weld mount kit, headers, radiator and fuel parts from Novak.GM LS (Gen III / IV) swap · difficulty 4/5

Sensors

Factory sensors by role: part numbers, signal type and fitment years.

SensorOEM part numbersType / signalYears and markets
Crank positionGM 12703627 (58x)Cross-ref: Delphi SS11397 | NTK EH0403Sourced · medium18192058x reluctor · 58x2006-13 Corvette, 2010-15 Camaro
Cam positionGM 12591720Cross-ref: Delphi SS11370 | NTK EC0321Sourced · medium181920Not yet sourced2005-13 Corvette, 2010-15 Camaro
Knock × 2GM 12623730 (repl 12570125; superseded by 12739206)Cross-ref: ACDelco 213-1576Sourced · medium181920Not yet sourced2005-13 Corvette, 2010-15 Camaro SS, Gen IV trucks/G8/GTOCamaro catalogue also lists GM 12729597 for 2010-24 3.6/6.2
MAPGM 55573248 (repl 12591290, 93192107)Sourced · medium1819201-bar MAP (MM title)2008-13 Corvette 6.2, 2010-15 Camaro 6.2Catalogue title mislabels it as IAT
MAFGM 15865791 (repl 12576410)Cross-ref: ACDelco 213-4222Sourced · medium181920Not yet sourced2006-13 Corvette 6.2/7.0, 2010-15 Camaro SS
O2 (upstream)GM 12617332 (2009-13 Corvette, 2010-15 Camaro front) | GM 12581966 (2005-13 Corvette front)Cross-ref: Denso 234-4669 (2010-15 Camaro upstream) | Denso 234-4332Sourced · medium181920Not yet sourced
O2 (downstream)GM 12609457 (Camaro 2010-15 rear) | GM 12611165 (Corvette 2008-13 rear)Sourced · medium1819Not yet sourced

Ignition and triggers

Ignition systemcoil-on-plugResearched, unverified
Crank trigger58x reluctor2006-13 Corvette, 2010-15 CamaroSourced · medium181920
Cam sensorOEM sensor GM 125917202005-13 Corvette, 2010-15 CamaroSourced · medium181920
Valve timing
  • None
  • L99 cam phaser + AFM
Researched, unverified

Tuning notes

Factory load sensing

The factory ECU measures load by MAF+MAP (blended / torque model). Chevrolet Performance LS3 controller kit includes MAF and 2 O2 sensors. L99 adds AFM (not sourced).Medium3

Factory oxygen sensors

Downstream O2 sensors: yes.Medium3

Injector drive

Factory injector impedance: high (saturated). Connector: EV6 / USCAR.Medium91058

Driver and calibration

High-impedance injectors run from a saturated driver. Any injector change needs new flow and dead-time data in the calibration. Researched, unverified

Known limits (reported)

Commonly reported that the powder-metal rods and hypereutectic pistons are the first limits under boost.Medium42124

Common first upgrades (reported)

Builders most often report upgrading: forged rods and pistons; head studs.Medium42124

Valvetrain, factory engine management and weak points across every generation are on the GM LS (Gen III / IV) guide.

Vehicles with the LS3 / L99

Sources

Numbered as cited above. Hover or tap a citation chip to preview it.

25 sources
  1. Factory ratings: GM LS family (Gen III/IV) (E-701) · en.wikipedia.org · reference · retrieved 2026-10-25
  2. Factory ratings: GM LT family (Gen V, incl. DFM trucks) (E-702) · poweredsolutions.gm.com · oem · retrieved 2026-10-25
  3. GM Gen III/IV crate controllers (E-803) · jegs.com · vendor-doc · retrieved 2026-10-25
  4. GM LS Gen III/IV internals (E-1000) · en.wikipedia.org · reference · retrieved 2026-10-25
  5. Injector aftermarket fitment (E-1200) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  6. Injector aftermarket fitment (E-1201) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  7. Injector aftermarket fitment (E-1202) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  8. Injector aftermarket fitment (E-1204) · fuelinjectorclinic.com · vendor-doc · retrieved 2026-10-25
  9. OEM injector (E-1209) · onallcylinders.com · press · retrieved 2026-10-25
  10. OEM injector (E-1210) · enginelabs.com · press · retrieved 2026-10-25
  11. Injectors / ID1050-XDS fitment (E-1230) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  12. Injectors / ID1300-XDS fitment (E-1231) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  13. Injectors / ID1750-XDS fitment (E-1232) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  14. Injector Dynamics ID1050-XDS fitment table (E-1260) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  15. Injector Dynamics ID1300/ID1750/ID2600 fitment tables (E-1261) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  16. Injector Dynamics ID1050-XDS fitment table (E-1290) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  17. Injector Dynamics ID1300-XDS fitment table (E-1291) · injectordynamics.com · vendor-doc · retrieved 2026-10-25
  18. OEM sensors GM Camaro (E-1320) · gmpartsgiant.com · vendor-doc · retrieved 2026-10-25
  19. OEM sensors GM Corvette (E-1321) · gmpartsgiant.com · vendor-doc · retrieved 2026-10-25
  20. GM sensors retailer catalogue (E-1326) · michiganmotorsports.com · reference · retrieved 2026-10-25
  21. LS swap pillar: GM LS engine reference (E-3003) · en.wikipedia.org · reference · retrieved 2026-10-27
  22. Swap: LS swap C10 (E-3713) · en.wikipedia.org · reference · retrieved 2026-10-27
  23. Firing order: GM Gen III/IV LS and Gen V LT V8 (E-4800) · help.summitracing.com · vendor-doc · retrieved 2026-10-28
  24. Track builds: ls-swap-drag-build (E-15518) · en.wikipedia.org · reference · retrieved 2026-11-04
  25. fuelinjectorclinic.com product listing · fuelinjectorclinic.com · vendor-doc · retrieved 2026-10-25

Evidence ids (E-…) refer to our research register; each records the source, date and confidence.