Engine displacement calculator (cc to cubic inches)

Engine displacement = π/4 × bore² × stroke × number of cylinders. Enter bore and stroke to get cc, litres and cubic inches, including overbore and stroker combinations.

mm
mm

Result

Displacement345.7 cu in
Per cylinder708.2 cc

Planning estimate from the formula below, not a measurement.

How it works

The formula, the method step by step, then a worked example.

V = π/4 × bore² × stroke × cylinders
  1. Each cylinder sweeps a cylinder of bore diameter and stroke height.
  2. Multiply by the cylinder count; 1 cu in = 16.387 cc.

Worked example

Inputs

Bore
99 mm
Stroke
92 mm
Cylinders
8

Result

Displacement345.7cu in
Per cylinder708.2cc

Assumptions and limits

  • Rotary engines are rated differently and are not covered.

Related terms

Frequently asked

How do you calculate engine displacement?

Displacement = π/4 × bore² × stroke × number of cylinders. With bore and stroke in millimetres, divide by 1000 to get cc; divide cc by 16.387 to get cubic inches.

How many cubic inches is a 5.7 liter?

5.7 litres is about 348 cubic inches. One litre equals 61.02 cubic inches; engines are often marketed with rounded figures, so the GM LS1 (5.7 L) is commonly called a 346.

How much displacement does a stroker add?

Displacement scales directly with stroke. Increasing stroke by 10% increases displacement by 10% at the same bore. Use the calculator with the new stroke and bore to see the exact figure.

Answers draw on the sources below.

Sources

  1. Internal Combustion Engine Fundamentals (2nd ed.) · J. B. Heywood, McGraw-Hill, 2018

Spot an error? Tell us.