Engine airflow (CFM) calculator
Engine airflow (CFM) = displacement (cu in) × rpm × volumetric efficiency ÷ 3456 for a four-stroke engine. Add manifold pressure and temperature to get mass airflow in lb/min and g/s.
Result
Planning estimate from the formula below, not a measurement.
How it works
The formula, the method step by step, then a worked example.
CFM = CID × rpm × VE ÷ 3456; ρ = P ÷ (R × T); lb/min = CFM × ρ
- A four-stroke engine fills its displacement once every two revolutions; 3456 converts cubic inches per two revolutions to cubic feet per minute.
- Volumetric efficiency scales that by how well the cylinders actually fill.
- Air density from pressure and temperature (ideal gas, R = 53.35 ft·lbf/lb·°R) turns volume into mass.
Worked example
Inputs
- Displacement
- 346 cu in
- Engine speed
- 6000 rpm
- Volumetric efficiency
- 90 %
- Manifold absolute pressure
- 14.7 psi
- Manifold air temperature
- 90 °F
Result
Assumptions and limits
- VE here is referenced to manifold conditions.
- Dry air.
Related terms
Frequently asked
How do you calculate engine CFM?
CFM = displacement (cu in) × rpm × volumetric efficiency ÷ 3456 for a four-stroke engine. A 350 cu in engine at 6,000 rpm and 90% VE flows about 547 CFM.
What is the difference between CFM and lb/min?
CFM is volume flow and changes with air density. lb/min is mass flow, which is what makes power and what turbo compressor maps use. Convert CFM to lb/min using air density from pressure and temperature.
What volumetric efficiency should I assume?
Street engines peak around 80-90% VE. Well-developed naturally aspirated race engines can exceed 100% at their tuned rpm. Using a figure from a similar engine's dyno-derived data beats guessing.
Answers draw on the sources below.
Sources
- Internal Combustion Engine Fundamentals (2nd ed.) · J. B. Heywood, McGraw-Hill, 2018
Spot an error? Tell us.

