Lambda to AFR converter
Lambda = AFR ÷ stoichiometric AFR of the fuel. For gasoline (14.7:1), 12.5:1 is lambda 0.85; on E85 (about 9.8:1), lambda 0.85 is 8.3:1. Lambda reads the same on every fuel.
Result
Planning estimate from the formula below, not a measurement.
How it works
The formula, the method step by step, then a worked example.
λ = AFR ÷ AFR(stoich); AFR(stoich, blend) = w(ethanol) × 9.0 + (1 − w) × 14.7 (w = ethanol mass fraction)
- Find the fuel's stoichiometric ratio. For ethanol blends, weight the two fuels' stoich ratios by mass.
- Divide the measured AFR by it.
Worked example
Inputs
- Air-fuel ratio
- 12.5 :1
- Ethanol content
- 0 %
Result
Assumptions and limits
- Gasoline stoich 14.7:1 and ethanol 9.0:1 by mass; real pump gasoline varies slightly.
- Wideband controllers measure lambda directly and display AFR using a fixed fuel setting, so a gasoline-scaled AFR reading on E85 is wrong unless converted.
Related terms
Frequently asked
What AFR is lambda 1?
Lambda 1 is the stoichiometric ratio of the fuel: about 14.7:1 for gasoline, about 14.1:1 for E10, and about 9.8:1 for E85. Lambda is the same number on every fuel, which is why tuners prefer it.
How do I convert AFR to lambda?
Divide the air-fuel ratio by the fuel's stoichiometric ratio. On gasoline, 12.5:1 ÷ 14.7 = lambda 0.85. On E85, lambda 0.85 is 0.85 × 9.8 = 8.3:1.
Why does my wideband show gasoline AFR on E85?
Wideband sensors measure lambda. The gauge converts it to AFR using a fixed fuel setting, usually gasoline. On E85 that display is still correct as lambda, but the AFR number is scaled for gasoline. Read lambda, or set the gauge to the correct fuel.
Answers draw on the sources below.
Sources
- Automotive Handbook · Robert Bosch GmbH
- Internal Combustion Engine Fundamentals (2nd ed.) · J. B. Heywood, McGraw-Hill, 2018
Spot an error? Tell us.

