Injector duty cycle calculator

Injector duty cycle (%) = pulse width (ms) × rpm ÷ 1200 on a four-stroke engine that injects once per cycle. Enter a logged pulse width and rpm to see how close the injector is to static.

ms
rpm

Result

Duty cycle81.3 %
Time per engine cycle18.46 ms

Planning estimate from the formula below, not a measurement.

How it works

The formula, the method step by step, then a worked example.

duty % = pulse width (ms) × rpm ÷ 1200
  1. A four-stroke cycle takes two revolutions, which is 120,000 ÷ rpm milliseconds.
  2. Duty cycle is the share of that time the injector is open.

Worked example

Inputs

Pulse width
15 ms
Engine speed
6500 rpm

Result

Duty cycle81.3%
Time per engine cycle18.46ms

Assumptions and limits

  • One injection event per cylinder per cycle (sequential, or batch with one event per 720°). Batch-fire twice per cycle doubles the events, halving the pulse width at the same duty.
  • Pulse width as logged, including dead time.

Related terms

Frequently asked

How do you calculate injector duty cycle?

Duty cycle (%) = pulse width (ms) × rpm ÷ 1200 for a four-stroke engine that injects once per cycle. At 6,500 rpm one cycle lasts 18.5 ms, so a 15 ms pulse is 81% duty.

What is a safe maximum injector duty cycle?

Most calibrators aim to stay below 80-85% at peak power. Above that, the injector has little time to close and reopen, fuel delivery becomes less precise, and there is no margin left for hot fuel or voltage drop.

Can injector duty cycle go over 100%?

Not in reality. A calculated value over 100% means the requested pulse is longer than the time available in one engine cycle, so the injector stays open (static) and the engine gets less fuel than requested.

Answers draw on the sources below.

Sources

  1. Automotive Handbook · Robert Bosch GmbH

Spot an error? Tell us.