Fuel pump size calculator

Fuel pump flow needed = horsepower × BSFC, converted to litres per hour, plus a safety margin, delivered at your regulated fuel pressure plus boost. Check the pump's flow curve at that pressure and voltage.

hp
:1

Typical: gasoline NA 0.45-0.50, gasoline boosted 0.55-0.65, E85 NA 0.65-0.75, E85 boosted 0.80-0.90 lb/hp-hr.

g/cc
%
psi
psi

Result

Pump flow required228 L/h
At pump outlet pressure53.5 psi
Engine consumption (no margin)183 L/h

Planning estimate from the formula below, not a measurement.

How it works

The formula, the method step by step, then a worked example.

L/h = hp × BSFC × 453.6 ÷ (density × 1000) × (1 + margin)
  1. Fuel mass flow is horsepower × BSFC (lb/hr).
  2. Convert to volume with the fuel's density.
  3. Add margin for voltage sag, pump wear and fuel temperature.
  4. Pumps flow less as pressure rises, so read the pump's curve at base pressure plus boost.

Worked example

Inputs

Target crank horsepower
500 hp
BSFC
0.6 :1
Fuel density
0.745 g/cc
Safety margin
25 %
Base fuel pressure
43.5 psi
Peak boost
10 psi
Boost-referenced (1:1) regulator
1

Result

Pump flow required228L/h
At pump outlet pressure53.5psi
Engine consumption (no margin)183L/h

Assumptions and limits

  • Pump flow curves are quoted at a stated voltage (often 12 V or 13.5 V); flow drops at lower voltage.
  • Return-style systems also circulate fuel back to the tank, so the pump must exceed engine demand.

Related terms

Frequently asked

What fuel pump do I need for 500 hp?

500 crank hp on gasoline with boost (BSFC 0.60) uses about 300 lb/hr, roughly 183 L/h. With a 25% margin, look for a pump that delivers about 230 L/h at your base fuel pressure plus boost, at the voltage it will actually see.

Why does fuel pump flow drop under boost?

With a boost-referenced regulator, fuel pressure rises 1 psi for every 1 psi of boost, and electric pumps flow less as pressure rises. A pump rated 255 L/h at 40 psi can deliver much less at 70 psi. Always read the flow curve at the real pressure.

Does voltage affect fuel pump flow?

Yes. Pump speed and flow fall with voltage, so long or thin wiring can starve the engine at peak power. Size the wiring for low voltage drop (see the wire gauge calculator) and check the curve at 12-13.5 V.

Answers draw on the sources below.

Sources

  1. Automotive Handbook · Robert Bosch GmbH
  2. Internal Combustion Engine Fundamentals (2nd ed.) · J. B. Heywood, McGraw-Hill, 2018

Spot an error? Tell us.