AiM · Lap timers

AiM Solo 2 DL

Data loggersDash displays≈ £640 (UK retail)

The AiM Solo 2 DL is a self-contained GPS lap timer and data logger that also records engine data from the car's ECU over CAN, RS232 or K-line. It combines a 25 Hz four-constellation GPS, a 100 Hz six-axis inertial platform, 4 GB of memory and an IP67 case at 240 g, with analysis in AiM RaceStudio 3. The cheaper Solo 2 omits the ECU link.12

Illustration, not the product.

Key facts

GPS25 Hz, four constellationsSourced12
Inertial3-axis ±5 g accelerometer + 3-axis gyro, 100 HzSourced21
ECU linkCAN, RS232 or K-lineDL onlySourced2
Memory4GBSourced2
Size and weight98.0 × 73.7 × 30.2 mm, 240 gSourced2
Price (UK)≈ £640UK retailer price for the car track-day version, November 2026.Sourced · medium4

Suits

  • Track-day drivers wanting lap timing plus ECU data
  • Motorcycle and kart racers using AiM plug-and-play cables
  • Owners pairing timing with a SmartyCam video overlay

What it is and where it fits

The AiM Solo 2 DL is a GPS lap timer that doubles as a data logger and small dash.

It calculates lap and sector times on its own, and the DL version adds engine data read straight from the ECU.1

It suits track-day drivers and club racers who want timing plus engine channels without wiring sensors. AiM also sells kits for motocross, sports bikes, karts and powerboats.14

The plain Solo 2 has the same GPS, inertial sensors and case but no ECU connection and five display pages instead of eight.2

Hardware and I/O

A 25 Hz receiver tracks four satellite constellations.

AiM states position precision is generally under 0.5 m (1.6 ft), and a 100 Hz inertial platform adds acceleration, roll, pitch and yaw.Medium12

The graphical display is 238 × 99 pixels with seven backlight colors and ten RGB LEDs for shift lights and alarms. Metal pushbuttons control the unit.2

The case is IP67, 98.0 × 73.7 × 30.2 mm and 240 g with its internal rechargeable battery. It can also run on external 9-15 V power.2

Software and configuration

The unit recognizes the track at power-up from its built-in database and sets the start line and time zone.

Predictive lap timing compares against best of day, best of session, previous lap or a reference lap.1

Performance test modes time speed runs such as 0-60 mph and distance runs such as 1/4 mile. Results show on screen right after the run.1

Deeper analysis runs in AiM RaceStudio 3 on a PC, with data transferred over Wi-Fi.14

Connectivity and expansion

The DL connects to the ECU over CAN, RS232 or K-line, and AiM lists more than 1,000 supported ECUs.

If a protocol is missing, the CAN builder feature lets the user define one.21

Without an ECU link, the DL reads RPM from the coil low-voltage side (150-400 V) or a square-wave signal (8-50 V).1

CAN expansions include AiM's Channel Expansion for four analog sensors and LCU-series lambda controllers. The DL can send its data to a SmartyCam camera for a live overlay on 60 fps video.1

Installation notes

AiM and its dealers sell roll-bar, tube, suction-cup and U-bolt mounts plus handlebar pads.

Bike-specific kits cover Aprilia, BMW, Ducati, Honda, Kawasaki, MV Agusta, Suzuki and Yamaha.1

Mount the unit with a clear view of the sky for GPS reception. For ECU data, ready-made cables exist for OBDII and many bikes, and a generic CAN/RS232 cable suits other cars.Medium14

Generations and variants

AiM's product history lists four hardware revisions from 2018 to 2020.

Rev04, from September 2020, switched to a uBlox 09 GNSS module; earlier revisions changed the main board, battery charger and Wi-Fi module.3

AiM sells a Track-Day Kit pairing the Solo 2 DL with a SmartyCam 4 Corsa camera, listed at about £1,950 in the UK.Medium14

Specifications

From the maker's published data and independent sources.

Timing and sensors

SpecValueSource
GPS25 Hz, four GNSS constellations; uBlox 09 module from September 2020 (Rev04)13
Position accuracyGenerally under 0.5 m (1.6 ft), per AiMMedium1
Inertial platform3-axis ±5 g accelerometer and 3-axis gyro at 100 Hz21
Track databaseBuilt-in, thousands of tracks with automatic recognition1
Lap functionsLap and sector times; predictive lap against best of day, best of session, previous or reference lap1

Display and inputs

SpecValueSource
DisplayGraphical, 238 × 99 pixels, up to 8 configurable pages (Solo 2: 5)2
Backlight7 configurable RGB colors2
Shift and alarm LEDs10 configurable RGB LEDs2
ECU connectionCAN, RS232 or K-line, AiM lists 1,000+ ECUs; custom CAN protocols via CAN builder21
RPM inputCoil low-voltage signal 150-400 V or square wave 8-50 V1
ConnectionWi-Fi for data download and setup2

Physical and power

SpecValueSource
PowerRechargeable lithium battery; external 9-15 V2
ConnectorsBinder 712 5-pin plus Binder 712 8-pin (DL)2
Dimensions98.0 × 73.7 × 30.2 mm (3.86 × 2.90 × 1.19 in)2
Weight240 g (8.5 oz) with battery2
SealingIP672
MountingFour M3 × 5 mm fixing points2

Strengths and limits

Facts, each cited. Not a score.

Strengths

  • Reads ECU data over CAN, RS232 or K-line from a database of more than 1,000 ECUs.2
  • Runs on its own battery with built-in GPS and inertial sensors, so it needs no wiring for basic timing.21
  • IP67 case at 240 g with 4 GB of memory.2

Limits

  • The display is a 238 × 99 pixel graphical screen, far lower resolution than a TFT dash.Medium2
  • No analog sensor inputs on the unit; analog channels need the CAN Channel Expansion.Medium1
  • GPS rate is 25 Hz; inertial data runs at 100 Hz.21

Often compared with

ProductCategoryKey fact
Garmin CatalystLap timersPositioning: 10 Hz multi-GNSS (GPS, GLONASS) + accelerometers + camera
AiM SmartyCam 3 seriesVideo and dataVideo: 1920 × 1080 H.264; 30 fps (Sport) or 60 fps (Corsa, GP, Dual)
AiM MXS 1.2 StradaDash displaysScreen: 5 in TFT, 800 × 480 (1.3 Strada)

Frequently asked

What is the difference between the AiM Solo 2 and Solo 2 DL?

The Solo 2 DL adds an ECU connection over CAN, RS232 or K-line, an RPM input and an extra 8-pin connector. It also has eight display pages against five. Both share the 25 Hz GPS, 100 Hz inertial platform, 4 GB memory, IP67 case and 240 g weight.21

Can the AiM Solo 2 DL read ECU data?

Yes. It connects to the ECU over CAN, RS232 or K-line and records the engine channels alongside GPS data. AiM lists more than 1,000 supported ECUs and offers a CAN builder to define protocols it does not already know.21

How accurate is the AiM Solo 2 DL GPS?

AiM states the 25 Hz four-constellation receiver gives position precision generally under 0.5 m. Position and speed are recorded 25 times a second. A UK dealer describes lap timing accuracy of up to two-hundredths of a second.Medium14

Does the AiM Solo 2 DL need external power?

No. It has a rechargeable lithium battery and runs on its own for basic timing. It also accepts external 9 to 15 V power, and the ECU cable usually supplies it in a car install.Medium24

What software does the AiM Solo 2 DL use?

AiM RaceStudio 3 configures the Solo 2 DL and analyzes its data on a PC. The unit transfers data over Wi-Fi. On-screen review is available straight after a session or performance test.12

Does the Solo 2 DL work with SmartyCam?

Yes. The Solo 2 DL can send ECU, GPS, inertial and analog data to AiM SmartyCam cameras, which show it as an overlay on 60 fps video. AiM sells a Track-Day Kit pairing the Solo 2 DL with a SmartyCam 4 Corsa.1

Related terms

Sources

Numbered as cited above. Hover or tap a citation chip to preview it.

  1. Solo 2/Solo 2 DL product page · AiM Sportline · vendor-doc · retrieved 2026-11-04
  2. AiM Solo 2/Solo 2 DL technical sheet, version 1.14 · AiM Sportline · vendor-doc · retrieved 2026-11-04
  3. AiM Solo 2/Solo 2 DL product history, version 1.10 · AiM Sportline · vendor-doc · retrieved 2026-11-04
  4. Aim Solo 2 DL GPS + ECU Track Day Lap Timer listing · AimShop · reference · retrieved 2026-11-04

A technical overview from published sources; we have not tested this product. Product names are the property of their owners and identify the product only; GAINS is not affiliated with, or endorsed by, the maker.