Motorsport electronics
Every box in the car, explained.
Neutral technical overviews of the ECUs, dashes, power modules, loggers and controllers racers use: what each one does, its I/O and software, how it installs, and what to compare it with. No scores, just cited facts.
36products
15categories
16makers
Standalone ECUs
ECUMasterECUMaster EMU BlackThe ECUMaster EMU Black is a compact standalone ECU from Poland with a built-in Bosch LSU 4.2/4.9 wideband controller, 4 bar MAP sensor, two EGT…ECUMasterECUMaster EMU PRO-8The ECUMaster EMU PRO-8 is a motorsport ECU for engines up to eight cylinders, with 31 outputs, 24 inputs, two internal Bosch LSU 4.9 wideband…EmtronEmtron KV8The Emtron KV8 is an Australian motorsport ECU with 8 injector channels (peak-and-hold or saturated), 8 ignition outputs, 16 auxiliary outputs, 16…FuelTechFuelTech FT600The FuelTech FT600 is a standalone ECU with a built-in 4.3 in touchscreen, 16 injector outputs, 16 ignition-capable outputs, 20 configurable inputs, a…HaltechHaltech Elite 2500The Haltech Elite 2500 is a two-connector standalone ECU with 8 injector and 8 ignition outputs, drive-by-wire, dual knock and 2 CAN buses, aimed at…HaltechHaltech Nexus R5 VCUThe Haltech Nexus R5 is a vehicle control unit that combines a standalone ECU with 18 injector and 12 ignition outputs, a 16-output power distribution…HolleyHolley Terminator XThe Holley Terminator X is an engine-specific EFI system for LS, LT, Coyote and Gen V Hemi swaps that drives 8 high-impedance injectors and 8 coils,…Link Engine ManagementLink G4X FuryXThe Link G4X FuryX is a wire-in standalone ECU from Link Engine Management with 8 injection drivers, an onboard digital wideband controller,…Link Engine ManagementLink G5 Voodoo Neo 6The Link G5 Voodoo Neo 6 is a wire-in standalone ECU with 12 injection and 8 ignition drives, dual H-bridge throttle control, one onboard wideband, 2…MaxxECUMaxxECU RACEThe MaxxECU RACE is a standalone ECU with 8 peak-and-hold injector outputs, 8 ignition outputs, a built-in Bosch LSU 4.2/4.9 wideband controller, a 3…MoTeCMoTeC M130The MoTeC M130 is the smallest port-injection ECU in MoTeC's M1 range: 8 injector and 8 ignition outputs, 6 half-bridges, one CAN bus and Ethernet on…MoTeCMoTeC M150The MoTeC M150 is a mid-range M1-series ECU for port-injected engines, with 12 peak-and-hold injector outputs, 12 ignition outputs, 10 half-bridge…SyvecsSyvecs S7-PlusThe Syvecs S7-Plus is a motorsport ECU from UK maker Syvecs with 16 low-side injection/PWM outputs, 6 ignition drivers, 8 half-bridge outputs, 22…
Dash displays
AiMAiM MXG 1.2 StradaThe AiM MXG 1.2 Strada is the 7 in colour dash display in AiM's MX family, reading an ECU over CAN, RS232 or K-Line and showing it with 10 RGB shift…AiMAiM MXS 1.2 StradaThe AiM MXS 1.2 Strada is a 5 in colour dash display from AiM's MX family, built to read an ECU over CAN, RS232 or K-Line and show it with 10 RGB…AiMAiM PDM32The AiM PDM32 is a 32-output power distribution module with a built-in data logger, made for race cars wired from scratch.AiMAiM Solo 2 DLThe AiM Solo 2 DL is a self-contained GPS lap timer and data logger that also records engine data from the car's ECU over CAN, RS232 or K-line.ECUMasterECUMaster ADU 7The ECUMaster ADU 7 is a 7 in, 800 × 480 motorsport dash with 8 analog and 8 digital inputs, 2 CAN buses, 15 RGB LEDs, a built-in accelerometer and…FuelTechFuelTech FT600The FuelTech FT600 is a standalone ECU with a built-in 4.3 in touchscreen, 16 injector outputs, 16 ignition-capable outputs, 20 configurable inputs, a…HaltechHaltech iC-7 Display DashThe Haltech iC-7 is a 7 in (178 mm) full-colour CAN dash with 9 analog inputs, 3 digital inputs, a tach input, 4 outputs, a 14-LED shift light and 512…MoTeCMoTeC C125The MoTeC C125 is a 5 in, 800 × 480 colour dash with 10 programmable LEDs, 2 CAN buses, 2 RS232 ports and a built-in 3-axis G sensor, in a 360 g IP67…
Data loggers
AiMAiM PDM32The AiM PDM32 is a 32-output power distribution module with a built-in data logger, made for race cars wired from scratch.AiMAiM SmartyCam 3 seriesThe AiM SmartyCam 3 series is a family of motorsport cameras that record Full HD video with live data overlays from AiM loggers, GPS and the car's…AiMAiM Solo 2 DLThe AiM Solo 2 DL is a self-contained GPS lap timer and data logger that also records engine data from the car's ECU over CAN, RS232 or K-line.ECUMasterECUMaster ADU 7The ECUMaster ADU 7 is a 7 in, 800 × 480 motorsport dash with 8 analog and 8 digital inputs, 2 CAN buses, 15 RGB LEDs, a built-in accelerometer and…ECUMasterECUMaster EMU PRO-8The ECUMaster EMU PRO-8 is a motorsport ECU for engines up to eight cylinders, with 31 outputs, 24 inputs, two internal Bosch LSU 4.9 wideband…ECUMasterECUMaster PMU-16The ECUMaster PMU-16 is a 16-output power management unit that replaces relays and fuses with current-sensing, self-resetting solid-state outputs.EmtronEmtron KV8The Emtron KV8 is an Australian motorsport ECU with 8 injector channels (peak-and-hold or saturated), 8 ignition outputs, 16 auxiliary outputs, 16…FuelTechFuelTech FT600The FuelTech FT600 is a standalone ECU with a built-in 4.3 in touchscreen, 16 injector outputs, 16 ignition-capable outputs, 20 configurable inputs, a…HaltechHaltech Elite 2500The Haltech Elite 2500 is a two-connector standalone ECU with 8 injector and 8 ignition outputs, drive-by-wire, dual knock and 2 CAN buses, aimed at…HaltechHaltech iC-7 Display DashThe Haltech iC-7 is a 7 in (178 mm) full-colour CAN dash with 9 analog inputs, 3 digital inputs, a tach input, 4 outputs, a 14-LED shift light and 512…HaltechHaltech Nexus R5 VCUThe Haltech Nexus R5 is a vehicle control unit that combines a standalone ECU with 18 injector and 12 ignition outputs, a 16-output power distribution…Link Engine ManagementLink G4X FuryXThe Link G4X FuryX is a wire-in standalone ECU from Link Engine Management with 8 injection drivers, an onboard digital wideband controller,…Link Engine ManagementLink G5 Voodoo Neo 6The Link G5 Voodoo Neo 6 is a wire-in standalone ECU with 12 injection and 8 ignition drives, dual H-bridge throttle control, one onboard wideband, 2…MaxxECUMaxxECU RACEThe MaxxECU RACE is a standalone ECU with 8 peak-and-hold injector outputs, 8 ignition outputs, a built-in Bosch LSU 4.2/4.9 wideband controller, a 3…MoTeCMoTeC C125The MoTeC C125 is a 5 in, 800 × 480 colour dash with 10 programmable LEDs, 2 CAN buses, 2 RS232 ports and a built-in 3-axis G sensor, in a 360 g IP67…MoTeCMoTeC M130The MoTeC M130 is the smallest port-injection ECU in MoTeC's M1 range: 8 injector and 8 ignition outputs, 6 half-bridges, one CAN bus and Ethernet on…MoTeCMoTeC M150The MoTeC M150 is a mid-range M1-series ECU for port-injected engines, with 12 peak-and-hold injector outputs, 12 ignition outputs, 10 half-bridge…SyvecsSyvecs S7-PlusThe Syvecs S7-Plus is a motorsport ECU from UK maker Syvecs with 16 low-side injection/PWM outputs, 6 ignition drivers, 8 half-bridge outputs, 22…
Power distribution modules
AiMAiM PDM32The AiM PDM32 is a 32-output power distribution module with a built-in data logger, made for race cars wired from scratch.ECUMasterECUMaster PMU-16The ECUMaster PMU-16 is a 16-output power management unit that replaces relays and fuses with current-sensing, self-resetting solid-state outputs.HaltechHaltech Nexus R5 VCUThe Haltech Nexus R5 is a vehicle control unit that combines a standalone ECU with 18 injector and 12 ignition outputs, a 16-output power distribution…HaltechHaltech PD16 PDMThe Haltech PD16 is a 16-output power distribution module that works only as part of a Haltech Elite or Nexus engine management system.MoTeCMoTeC PDM15The MoTeC PDM15 is a 15-output solid-state power distribution module that replaces the relays, fuses and circuit breakers in a race car.MoTeCMoTeC PDM30The MoTeC PDM30 is a 30-output solid-state power distribution module for race cars with many switched circuits.
Wideband controllers
14Point714Point7 Spartan 3The 14Point7 Spartan 3 v2 is a compact wideband controller, priced from $139, for Bosch LSU 4.9 and LSU ADV sensors, with two programmable analog…ECUMasterECUMaster EMU BlackThe ECUMaster EMU Black is a compact standalone ECU from Poland with a built-in Bosch LSU 4.2/4.9 wideband controller, 4 bar MAP sensor, two EGT…ECUMasterECUMaster EMU PRO-8The ECUMaster EMU PRO-8 is a motorsport ECU for engines up to eight cylinders, with 31 outputs, 24 inputs, two internal Bosch LSU 4.9 wideband…ECUMasterECUMaster Lambda to CANThe ECUMaster Lambda to CAN is a compact wideband controller that runs a Bosch LSU 4.9 sensor and sends lambda and AFR over CAN 2.0A/B.EmtronEmtron KV8The Emtron KV8 is an Australian motorsport ECU with 8 injector channels (peak-and-hold or saturated), 8 ignition outputs, 16 auxiliary outputs, 16…HaltechHaltech Nexus R5 VCUThe Haltech Nexus R5 is a vehicle control unit that combines a standalone ECU with 18 injector and 12 ignition outputs, a 16-output power distribution…HolleyHolley Terminator XThe Holley Terminator X is an engine-specific EFI system for LS, LT, Coyote and Gen V Hemi swaps that drives 8 high-impedance injectors and 8 coils,…Link Engine ManagementLink G4X FuryXThe Link G4X FuryX is a wire-in standalone ECU from Link Engine Management with 8 injection drivers, an onboard digital wideband controller,…Link Engine ManagementLink G5 Voodoo Neo 6The Link G5 Voodoo Neo 6 is a wire-in standalone ECU with 12 injection and 8 ignition drives, dual H-bridge throttle control, one onboard wideband, 2…MaxxECUMaxxECU RACEThe MaxxECU RACE is a standalone ECU with 8 peak-and-hold injector outputs, 8 ignition outputs, a built-in Bosch LSU 4.2/4.9 wideband controller, a 3…MoTeCMoTeC LTC (Lambda to CAN)The MoTeC LTC (Lambda to CAN) is a small wideband controller that runs a Bosch LSU 4.9 sensor and sends lambda readings over CAN to an ECU or logger.SyvecsSyvecs S7-PlusThe Syvecs S7-Plus is a motorsport ECU from UK maker Syvecs with 16 low-side injection/PWM outputs, 6 ignition drivers, 8 half-bridge outputs, 22…
Lap timers
AiMAiM Solo 2 DLThe AiM Solo 2 DL is a self-contained GPS lap timer and data logger that also records engine data from the car's ECU over CAN, RS232 or K-line.ECUMasterECUMaster ADU 7The ECUMaster ADU 7 is a 7 in, 800 × 480 motorsport dash with 8 analog and 8 digital inputs, 2 CAN buses, 15 RGB LEDs, a built-in accelerometer and…GarminGarmin CatalystThe Garmin Catalyst is a dash-mounted driving coach and lap timer for track-day drivers.
CAN keypads
Blink MarineBlink Marine PKP-2400-SIThe Blink Marine PKP-2400-SI is a compact eight-key CAN bus keypad used in race cars to switch PDM and ECU functions without a panel of hard-wired…ECUMasterECUMaster CAN KeyboardThe ECUMaster CAN Keyboard is a family of sealed, backlit CAN bus keypads for controlling ECUMaster PMU power modules, EMU ECUs and ADU dashes from…HaltechHaltech CAN KeypadThe Haltech CAN Keypad is a sealed, backlit button panel that plugs into the CAN network of a Haltech Elite or Nexus system.
Ignition systems
MSDMSD 6AL (Digital 6AL)The MSD 6AL is a capacitive discharge (CD) ignition box that fires the coil several times per event at low RPM and adds a built-in rev limiter.MSDMSD Digital 6-PlusThe MSD Digital 6-Plus is a capacitive discharge ignition box for street and strip engines that adds launch and nitrous features to the 6-Series…
Boost controllers
FuelTechFuelTech FT600The FuelTech FT600 is a standalone ECU with a built-in 4.3 in touchscreen, 16 injector outputs, 16 ignition-capable outputs, 20 configurable inputs, a…GReddy (Trust)GReddy ProfecThe GReddy Profec is a compact electronic boost controller with a slim blue OLED head unit and a separate waterproof sensor box in the engine bay.TurbosmartTurbosmart eBoost2The Turbosmart eBoost2 is a self-contained electronic boost controller built into a 60 mm or 66 mm billet gauge.
Traction control
CAN expansion modules
ECUMasterECUMaster Lambda to CANThe ECUMaster Lambda to CAN is a compact wideband controller that runs a Bosch LSU 4.9 sensor and sends lambda and AFR over CAN 2.0A/B.MoTeCMoTeC LTC (Lambda to CAN)The MoTeC LTC (Lambda to CAN) is a small wideband controller that runs a Bosch LSU 4.9 sensor and sends lambda readings over CAN to an ECU or logger.
Digital gauges
GReddy (Trust)GReddy ProfecThe GReddy Profec is a compact electronic boost controller with a slim blue OLED head unit and a separate waterproof sensor box in the engine bay.TurbosmartTurbosmart eBoost2The Turbosmart eBoost2 is a self-contained electronic boost controller built into a 60 mm or 66 mm billet gauge.
Video and data
Shift lights
AiMAiM MXG 1.2 StradaThe AiM MXG 1.2 Strada is the 7 in colour dash display in AiM's MX family, reading an ECU over CAN, RS232 or K-Line and showing it with 10 RGB shift…AiMAiM MXS 1.2 StradaThe AiM MXS 1.2 Strada is a 5 in colour dash display from AiM's MX family, built to read an ECU over CAN, RS232 or K-Line and show it with 10 RGB…ECUMasterECUMaster ADU 7The ECUMaster ADU 7 is a 7 in, 800 × 480 motorsport dash with 8 analog and 8 digital inputs, 2 CAN buses, 15 RGB LEDs, a built-in accelerometer and…HaltechHaltech iC-7 Display DashThe Haltech iC-7 is a 7 in (178 mm) full-colour CAN dash with 9 analog inputs, 3 digital inputs, a tach input, 4 outputs, a 14-LED shift light and 512…MoTeCMoTeC C125The MoTeC C125 is a 5 in, 800 × 480 colour dash with 10 programmable LEDs, 2 CAN buses, 2 RS232 ports and a built-in 3-axis G sensor, in a 360 g IP67…
Transmission controllers
ECUMasterECUMaster EMU PRO-8The ECUMaster EMU PRO-8 is a motorsport ECU for engines up to eight cylinders, with 31 outputs, 24 inputs, two internal Bosch LSU 4.9 wideband…HaltechHaltech Nexus R5 VCUThe Haltech Nexus R5 is a vehicle control unit that combines a standalone ECU with 18 injector and 12 ignition outputs, a 16-output power distribution…HolleyHolley Terminator XThe Holley Terminator X is an engine-specific EFI system for LS, LT, Coyote and Gen V Hemi swaps that drives 8 high-impedance injectors and 8 coils,…
Overviews come from published sources; we have not tested these products. Product names identify the product only; GAINS is not affiliated with, or endorsed by, their makers.

