Key facts
Suits
- Street and strip cars needing a launch limit and nitrous retard
- Carbureted or distributor engines on emissions-controlled street cars
- Builders who want rev and retard control without software
What it is and where it fits
The MSD Digital 6-Plus is a capacitive discharge ignition box that adds drag-racing features to MSD's 6-Series.
Beyond multiple sparks and a rev limit, it brings a 2-step launch limit, a timing retard for nitrous and a start retard.16
MSD aims it at street and strip cars, especially nitrous-equipped engines that need timing pulled when the system activates and a consistent launch RPM.1
Hardware and I/O
Each spark carries 135 mJ at 535 primary volts, and the multiple spark series lasts 20° of crankshaft rotation.
MSD rates it to 12,500 RPM at 14.4 V.1
A high-speed RISC microcontroller watches supply voltage, trigger signals and RPM. MSD states it holds timing to within 1° and rev limits to within 1%.1
The box runs on 12 to 18 V negative-ground systems and draws about 0.7 A per 1,000 RPM. It measures 8.5 × 4.5 × 2.2 in (216 × 114 × 56 mm) and weighs 3.7 lb.1
Software and configuration
Settings are made on the box with rotary switches, not software.
Two rev limits are set in 100 RPM steps and switched between, typically a launch limit and an over-rev limit.1
The single-stage step retard pulls timing when activated, for example by the nitrous system. Timing guidance here is qualitative: the right amount depends on the engine and fuel and belongs with a qualified tuner.Medium1
Start retard reduces timing during cranking to ease load on the starter, flywheel and engine. Mag pickup compensation adjusts the trigger for an accurate signal.1
Connectivity and expansion
The Digital 6-Plus accepts points, amplifier and magnetic pickup triggers on 4, 6 or 8-cylinder engines.
It has no Bluetooth or CAN; MSD's Ultra 6AL is the 6-Series box with an app and MSD CAN.14
A diagnostic LED flags trigger signal problems or a faulty charging system, which helps narrow down misfires before swapping parts.1
Installation notes
MSD includes mounting hardware and publishes installation instructions for part 6520.
MSD lists its Blaster HVC-2 coil (8253) as a service part to pair with 6-Series boxes.1
CARB EO D-722-2 makes the Digital 6-Plus legal for sale and use on emissions-controlled vehicles in all 50 states when used per MSD's application guide. This is general information, not legal advice.1
Generations and variants
MSD's 6-Series street line lists the Digital 6-Plus as 6520 and 6520CR.
Close relatives are the Digital 6AL (6425) with one dial-set limit and the 6AL-2 (6421) with a built-in two-step but no retard.Medium523
The Ultra 6AL (6423) adds a programmable step retard of up to 30°, three rev limiters and a phone app, but MSD lists it for racing use only.4
Specifications
From the maker's published data and independent sources.
Output and control
Features
| Spec | Value | Source |
|---|---|---|
| Rev limiters | Two limits, switchable, set by rotary switches in 100 RPM steps | 1 |
| Step retard | Single stage, for nitrous activation and top-end use | 1 |
| Start retard | Eases load on starter, flywheel and engine while cranking | 1 |
| Mag pickup compensation | Adjustable | 1 |
| Diagnostics | LED warns of trigger signal problems or a faulty charging system | 1 |
| EMI | Circuits debounced and isolated against electromagnetic interference | 1 |
Electrical and physical
Strengths and limits
Facts, each cited. Not a score.
Strengths
Often compared with
| Product | Category | Key fact |
|---|---|---|
| MSD 6AL (Digital 6AL) | Ignition systems | Primary voltage: 520-540 V |
Frequently asked
What does the MSD Digital 6-Plus do?
It is a capacitive discharge ignition box that fires 135 mJ multiple sparks at 535 primary volts to 12,500 RPM. It adds a 2-step rev limiter for launches, a single-stage timing retard for nitrous, a start retard for easier cranking and an LED that flags trigger or charging faults.1
What is the difference between the MSD Digital 6-Plus and 6AL?
The Digital 6AL (6425) has one rev limit set by two dials and runs to 11,000 RPM. The Digital 6-Plus (6520) adds a second rev limit, a single-stage step retard and a start retard, runs to 12,500 RPM and accepts 12 to 18 V. It is larger, heavier and about $314 dearer.12
How does the Digital 6-Plus step retard work?
When activated, typically by the nitrous system's arming signal, the box pulls a set amount of ignition timing in one stage. MSD intends it for nitrous and top-end use. The right amount depends on the engine and fuel; set it with a qualified tuner rather than from a generic figure.Medium1
Is the MSD Digital 6-Plus CARB legal?
Yes. MSD lists CARB Executive Order D-722-2 for the Digital 6-Plus, which makes it legal for sale and use on emissions-controlled vehicles in all 50 states when used per MSD's application guide. This is general information, not legal advice.1
What triggers does the MSD Digital 6-Plus accept?
MSD lists breaker points, amplifier (factory electronic module) and magnetic pickup inputs, on 4, 6 or 8-cylinder engines with negative-ground systems. Adjustable magnetic pickup compensation helps produce an accurate trigger signal.1
How fast can the MSD Digital 6-Plus rev?
MSD rates it to 12,500 RPM at 14.4 V. Current draw is about 0.7 A per 1,000 RPM, so around 8.75 A near the top of that range. Make sure the supply wiring holds voltage at high RPM.1
Related terms
Sources
Numbered as cited above. Hover or tap a citation chip to preview it.
- MSD Digital 6-Plus Ignition Control, part 6520 · MSD · vendor-doc · retrieved 2026-11-04
- MSD Digital 6AL Ignition Control - Red, part 6425 · MSD · vendor-doc · retrieved 2026-11-04
- MSD 6AL-2 Ignition Control - Red, part 6421 · MSD · vendor-doc · retrieved 2026-11-04
- MSD Ultra 6AL Ignition Control - Red, part 6423 · MSD · vendor-doc · retrieved 2026-11-04
- 6-Series Street ignition boxes catalogue · MSD · vendor-doc · retrieved 2026-11-04
- Capacitor discharge ignition · Wikipedia · reference · retrieved 2026-11-04
A technical overview from published sources; we have not tested this product. Product names are the property of their owners and identify the product only; GAINS is not affiliated with, or endorsed by, the maker.

