Key facts
Suits
- Carbureted or distributor V8, V6 and four-cylinder street and strip engines
- Points or factory-module ignition upgrades on emissions-controlled cars
- Builds that want a simple dial-set rev limiter
What it is and where it fits
The MSD 6AL is an aftermarket capacitive discharge ignition box that sits between the trigger and the coil.
A CD ignition charges a capacitor and dumps it into the coil primary, which suits high engine speeds better than a basic inductive system.15
MSD's name stands for multiple spark discharge: at lower RPM the box fires the plug several times per event. MSD Ignition introduced the technique in the 1970s and the 6AL became one of its best-known products.Medium61
It suits carbureted or distributor-equipped street, strip and track engines, from points-ignition classics to engines with factory electronic modules. MSD notes that other companies now sell boxes using the 6AL name.1
Hardware and I/O
The Digital 6AL uses a microprocessor to manage every firing and the rev limit.
MSD rates it at 520-540 primary volts, 45,000 secondary volts and up to 135 mJ per spark, to 11,000 RPM.1
It runs on 12 to 15 V negative-ground systems, still fires down to 7 V while cranking, and draws about 0.7 A per 1,000 RPM. A built-in LED helps with system checks.1
The case measures 8 × 4 × 1.8 in (203 × 102 × 46 mm) and weighs 1.7 lb. All wiring leaves one end through a sealed, locking connector, and vibration mounts are included.1
Software and configuration
There is no software on the Digital 6AL.
The rev limit is set with two rotary dials on top of the case in 100 RPM steps.1
MSD sells a 2-Step rev control (part 8732) made for the Digital 6AL 6425 and 64253, which adds a second, lower limit for launching.1
Connectivity and expansion
The box accepts breaker points, factory amplifier modules and magnetic pickups as triggers.
MSD publishes wiring guides for pairing it with MSD timing controls and a second MSD box, and sells a replacement harness (part 8897).Medium1
The Digital 6AL has no Bluetooth or CAN. MSD's newer Ultra 6AL adds a phone app over Bluetooth and MSD CAN communication.13
Installation notes
MSD supplies the wiring harness, parts for installation and vibration mounts.
Its instructions include wiring guides for points, GM HEI, Ford Duraspark and TFI, Chrysler magnetic pickup and MSD distributors and crank triggers.1
With CARB EO D-40-43, the Digital 6AL is legal for sale and use on emissions-controlled vehicles in all 50 states when installed per MSD's application guide. This is general information, not legal advice.1
Generations and variants
MSD's current 6-Series street line lists the Digital 6AL as 6425 (red) and 64253 (black), each at $364.95.Medium41
The 6AL-2 (6421) has a cast housing, 535 primary volts, a built-in two-step limiter set by four dials, Hall-effect trigger support and a 12,500 RPM ceiling.2
The Ultra 6AL (6423) is a compact unit with three rev limiters (launch, burnout and step retard), a phone app, MSD CAN, 15,000 RPM capability and up to 150 mJ. MSD lists it for racing use only, not emissions-controlled vehicles.3
Specifications
From the maker's published data and independent sources.
Output and control (Digital 6AL 6425)
| Spec | Value | Source |
|---|---|---|
| Ignition type | Capacitive discharge, multiple spark, microprocessor controlled | 16 |
| Primary voltage | 520-540 V | 1 |
| Secondary voltage | 45,000 V | 1 |
| Spark energy | 135-145 mJ per spark (marketing text: up to 135 mJ) | 1 |
| Maximum RPM | 11,000 RPM | 1 |
| Rev limiter | Built in, two rotary dials on top, 100 RPM increments | 1 |
| Diagnostics | Built-in LED for system checks | 1 |
Electrical and physical
| Spec | Value | Source |
|---|---|---|
| Supply | 12-15 V, negative ground; starts at 7 V | 1 |
| Current draw | 0.7 A per 1,000 RPM | 1 |
| Triggers | Breaker points, amplifiers (factory modules) and magnetic pickups | 1 |
| Cylinders | 4, 6 or 8 | 1 |
| Connector | All wires exit one end through a sealed, locking connector | 1 |
| Size and weight | 8 × 4 × 1.825 in (203 × 102 × 46 mm), 1.7 lb (0.77 kg) | 1 |
| Emissions status | CARB EO D-40-43; legal on emissions-controlled vehicles per MSD's application guide | 1 |
| Part numbers | 6425 (red), 64253 (black) | 14 |
Strengths and limits
Facts, each cited. Not a score.
Strengths
Limits
- No Hall-effect trigger listed for the Digital 6AL; the 6AL-2 and Ultra 6AL accept Hall inputs.Medium123
- Single rev limit; a launch limit needs the separate 2-Step control.1
- 11,000 RPM maximum, lower than the 6AL-2 (12,500) and Ultra 6AL (15,000).123
- No timing retard or data link; those need MSD add-ons or the Ultra 6AL.Medium13
Often compared with
| Product | Category | Key fact |
|---|---|---|
| MSD Digital 6-Plus | Ignition systems | Primary voltage: 535 V |
Frequently asked
What does an MSD 6AL do?
It replaces the basic ignition with a capacitive discharge system that charges a capacitor and fires it into the coil. MSD rates the Digital 6AL at over 530 primary volts and up to 135 mJ per spark, with multiple sparks at lower RPM. It also adds a built-in rev limiter.15
How do you set the rev limit on an MSD 6AL?
The Digital 6AL has two rotary dials on top of the case. They set the limit in 100 RPM steps, with no software needed. For a separate launch limit, MSD sells a 2-Step rev control, part 8732, made for the 6425 and 64253.1
Is the MSD 6AL street legal in California?
The Digital 6AL (6425) carries CARB Executive Order D-40-43. MSD states it is legal for sale and use on emissions-controlled vehicles in all 50 states when used per its application guide. The Ultra 6AL is racing-use only. This is general information, not legal advice.13
What triggers does the MSD 6AL accept?
MSD lists breaker points, amplifiers such as factory electronic ignition modules, and magnetic pickups for the Digital 6AL. It runs on 4, 6 or 8-cylinder engines with 12 V negative-ground systems. The 6AL-2 and Ultra 6AL also list Hall-effect triggers.123
How much current does an MSD 6AL draw?
MSD lists about 0.7 A per 1,000 RPM for the Digital 6AL, so roughly 4.2 A at 6,000 RPM and 7 A at 10,000 RPM. Feed it with wire and a supply that can deliver that at full RPM, and check voltage at the box under load.1
What is the difference between MSD 6AL and 6AL-2?
The 6AL-2 (6421) uses a new cast housing, 535 primary volts and four rotary dials for a built-in two-step: one limit for over-rev protection and one for launch. It accepts Hall-effect triggers and runs to 12,500 RPM. The Digital 6AL has one limit and an 11,000 RPM rating.21
Related terms
Sources
Numbered as cited above. Hover or tap a citation chip to preview it.
- MSD Digital 6AL Ignition Control - Red, part 6425 · MSD · vendor-doc · retrieved 2026-11-04
- MSD 6AL-2 Ignition Control - Red, part 6421 · MSD · vendor-doc · retrieved 2026-11-04
- MSD Ultra 6AL Ignition Control - Red, part 6423 · MSD · vendor-doc · retrieved 2026-11-04
- 6-Series Street ignition boxes catalogue · MSD · vendor-doc · retrieved 2026-11-04
- Capacitor discharge ignition · Wikipedia · reference · retrieved 2026-11-04
- MSD Ignition · Wikipedia · reference · retrieved 2026-11-04
A technical overview from published sources; we have not tested this product. Product names are the property of their owners and identify the product only; GAINS is not affiliated with, or endorsed by, the maker.

