Nitrous oxide injection

nitrousN2ONOSnitrous oxide systemwet nitrousdry nitrousdirect port nitrous

Nitrous oxide injection is a system that sprays nitrous oxide (N2O) into an engine's intake so it can burn extra fuel. N2O breaks down in the combustion chamber into nitrogen and oxygen, carrying about 36% oxygen by mass against roughly 23% for air, and the extra fuel must be added in proportion.123

How it works

When N2O decomposes, each molecule releases one nitrogen molecule and half an oxygen molecule.

The reaction is exothermic, so it adds heat to combustion. The mixture it leaves behind is richer in oxygen than air, allowing more fuel to burn in the same cylinder volume.12

N2O is stored as a liquid under its own vapor pressure, which rises steeply with bottle temperature. Liquid nitrous vaporizing in the intake cools the charge. Because flow through a fixed jet depends on bottle pressure, bottle temperature directly changes how much nitrous the engine receives.Medium21

Systems are either dry or wet. A dry system sprays only nitrous and adds fuel through the injectors. A wet system sprays nitrous and fuel together, so the intake carries fuel.

Delivery methods include a single nozzle, a plate under the throttle body, a bar, and direct port nozzles in each runner.1

Wet systems on port or direct injected engines need care because their intakes are designed to carry air only. Fuel pooling or uneven distribution of the nitrous and fuel mixture can cause intake backfires and lean cylinders.1

In tuning

Fuel must rise with nitrous flow, and ignition timing is normally reduced as nitrous is added because the denser, faster-burning charge raises cylinder pressure and knock risk. The amount is engine- and shot-specific and must be set with logged lambda, knock data and spark plug inspection, never copied from a chart.Medium34

Activation logic matters as much as jetting. Typical conditions are wide-open throttle, an rpm window, adequate fuel pressure and coolant temperature, with immediate shutoff on lean lambda or knock. Starting nitrous at low rpm or part throttle concentrates load where the engine is most vulnerable.Medium41

Safety note

The bottle is a pressure vessel. Mount it securely, keep its pressure-relief device intact and vented outside the cabin, never heat it with an open flame, and close the valve when not in use. Check fuel pump and injector headroom, because running out of fuel on nitrous quickly damages pistons.Medium24

Try it

hp
:1

Typical: gasoline NA 0.45-0.50, gasoline boosted 0.55-0.65, E85 NA 0.65-0.75, E85 boosted 0.80-0.90 lb/hp-hr.

%

Size for 80-85% so the injector still has control margin at peak power.

Result

Flow per injector75.0 lb/hr
Total fuel flow240 lb/hr

Planning estimate from the formula below, not a measurement.

Open the full fuel injector size calculator →

Myths vs facts

Myth Nitrous is a fuel that burns by itself.

Fact Nitrous oxide is an oxidizer. It supplies extra oxygen, and the extra power comes from the additional fuel that oxygen lets the engine burn.12

Myth A dry kit is safer because no fuel goes into the intake.

Fact A dry kit avoids fuel in the intake, but it relies on the injectors and fuel pump to add the right amount instantly. If the fuel added does not match nitrous flow, cylinders run lean, which is a common cause of nitrous engine damage.Medium14

Frequently asked

How does nitrous oxide make more power?

Nitrous oxide breaks down during combustion into nitrogen and oxygen, giving the cylinder more oxygen than the same volume of air contains. That lets the engine burn more fuel per cycle. Liquid nitrous also cools the intake charge as it vaporizes. The extra power comes from the extra fuel the oxygen allows.12

What is the difference between wet and dry nitrous?

A dry system sprays only nitrous into the intake and relies on the fuel injectors to add the extra fuel, usually by raising fuel pressure or injector pulse width. A wet system sprays nitrous and fuel together through its own nozzle, so the intake carries a fuel mist. Wet systems need intakes that can handle fuel without pooling.1

What causes a nitrous backfire?

Backfires usually come from a combustible nitrous and fuel mixture igniting in the intake. Common causes are fuel pooling in a wet system, uneven distribution leaving some cylinders lean, activating nitrous at too low an rpm, and ignition faults such as misfire or excessive plug gap under the higher cylinder pressure.Medium14

Why does nitrous need timing retard?

The oxygen-rich charge burns faster and produces higher cylinder pressure, so the same spark advance used without nitrous moves peak pressure earlier and raises knock risk. Calibrations normally reduce ignition advance as nitrous flow rises. The right amount is engine-specific and must be confirmed with knock monitoring and logs.Medium34

Does bottle pressure affect nitrous flow?

Yes. Nitrous is stored as a liquid under its own vapor pressure, which climbs as the bottle warms. Flow through a fixed jet rises with that pressure, so a warm bottle delivers more nitrous than a cold one. Logging bottle pressure and matching fuel delivery to it keeps the mixture consistent.Medium21

Sources

Numbered as cited above. Hover or tap a citation chip to preview it.

  1. Nitrous oxide engine · Wikipedia · reference · retrieved 2026-10-27
  2. Nitrous oxide · Wikipedia · reference · retrieved 2026-10-27
  3. Internal Combustion Engine Fundamentals, 2nd edition (2018) · McGraw-Hill (John B. Heywood) · book · retrieved 2026-10-27
  4. Automotive Handbook, 10th edition (2018) · Robert Bosch GmbH / Wiley · book · retrieved 2026-10-27