MoTeC · Standalone ECUs

MoTeC M150

Data loggers≈ $3,095 hardware only at one US retailer; firmware package and logging licences extra

The MoTeC M150 is a mid-range M1-series ECU for port-injected engines, with 12 peak-and-hold injector outputs, 12 ignition outputs, 10 half-bridge outputs, 3 CAN buses and 250 MB of logging memory in a 445 g magnesium case. It ships as hardware only: buyers add a firmware package such as GPR, and logging depth depends on a separate licence level.134

Illustration, not the product.

Key facts

Injector outputs12 peak and hold + 6 low-sideSourced13
Ignition outputs12Sourced13
Inputs

17 analog voltage, 6 temperature, 12 universal digital, 4 digital, 4 knock

Sourced1
CAN / RS232 / LIN3/ 1 / 1Sourced13
Logging memory250MBThe 2015 datasheet and a retailer give 250 MB; MoTeC's earlier M1 brochure table lists 120 MB for the M150.Conflict12
Weight445g≈ 1.0 lbSourced13

Suits

  • Professional and club race cars with up to 12 cylinders on port injection
  • Category-managed series that need locked firmware and secure data access
  • Builds already using MoTeC dashes, LTC lambda modules and i2 analysis

What it is and where it fits

The MoTeC M150 is the mid-size, port-injection member of MoTeC's M1 ECU family.

It sits between the 60-pin M130 and the larger M170 and M190, and suits engines up to 12 cylinders with one injector and one coil per cylinder.12

M1 ECUs run firmware packages rather than one fixed program. That makes them common in professional racing and in category-managed series, where the rule makers lock firmware to a specification.12

Hardware and I/O

Outputs cover 12 peak-and-hold injectors, 6 extra low-side injector drivers for staged fuel, 12 ignition channels and 10 half-bridge outputs. Every low-side and half-bridge output can run PWM for solenoids, pumps and throttles.1

Inputs total 17 analog voltage, 6 temperature, 12 universal digital and 4 plain digital channels, plus 4 knock inputs and 2 narrowband lambda inputs. Universal digital inputs accept crank and cam signals or wheel speeds with programmable trigger levels.1

The magnesium case measures 162 × 127.5 × 40.5 mm (6.4 × 5.0 × 1.6 in) and weighs 445 g. Four plastic connectors, two 34-pin and two 26-pin, carry the I/O.13

Software and configuration

MoTeC splits software into M1 Tune, which calibrates fuel, ignition, sensors and functions, and M1 Build, which creates custom firmware. Most owners never touch Build; they load a ready-made package.12

The ECU itself ships without a usable engine package. Retailers sell General Purpose packages such as GPA, GPR and GPRP as separate items, and one Polish dealer states plainly that the ECU price is hardware only.34

Three configuration modes exist

Locked to one application, standard (load any MoTeC package) and open (third-party developers write their own). Public-key security protects firmware and lets each user login see only permitted data.1

Connectivity and expansion

Three CAN buses, one RS232 and one LIN port link the M150 to dashes, lambda modules, keypads and sensor expanders.

MoTeC lists E816 and E888 expanders for extra I/O.1

The laptop connection is Ethernet, which MoTeC chose for fast log downloads. Logging depth is licensed: the standard level is diagnostic only, and the top level allows 8 log sets, 2,000 channels and 1,000 Hz.21

Installation notes

The M150 is a universal ECU, so the harness, platform firmware and base configuration are bought or built separately.

One US retailer recommends professional calibration, which fits the package-based setup.Medium3

Wideband lambda is not onboard. Plan for MoTeC LTC lambda-to-CAN modules, and for an external ignition amplifier such as the IGN4 when the engine uses passive coils.Medium21

Generations and variants

MoTeC's M1 brochure lists the M130, M141/M142, M150, M170, M181/M182 and M190.

The M141 and M181 variants add direct-injection drivers, while the M150 stays port-injection only.2

MoTeC's early M1 brochure lists 120 MB of logging memory for the M150, while the 2015 datasheet gives 250 MB. Check the hardware revision of a used unit before relying on either figure.Medium21

Specifications

From the maker's published data and independent sources.

Outputs

SpecValueSource
Peak-and-hold injector outputs121
Low-side injector outputs61
Ignition outputs121
Half-bridge outputs10, all PWM capable13
Injector typePort injection12

Inputs

SpecValueSource
Analog voltage inputs1713
Analog temperature inputs61
Universal digital inputs12 (ref/sync, wheel speeds and similar)1
Digital inputs41
Knock inputs41
Narrowband lambda inputs2 (wideband via MoTeC LTC modules on CAN)12

Communication and logging

SpecValueSource
CAN buses31
RS232 / LIN1 / 11
PC connectionEthernet2
Logging licencesLevel 1 diagnostic (standard); Level 2: 1 log set, 200 channels, 200 Hz; Level 3: 8 log sets, 2,000 channels, 1,000 Hz1

Physical

SpecValueSource
Dimensions162 × 127.5 × 40.5 mm (6.4 × 5.0 × 1.6 in)13
Connectors2 × 34-pin + 2 × 26-pin plastic (120 pins total)12
EnclosureMagnesium1
Supply voltage8-32 V operatingMedium3

Strengths and limits

Facts, each cited. Not a score.

Strengths

  • Runs 12 cylinders sequential with 6 extra low-side injector drivers for staged fuel.1
  • Ten PWM-capable half-bridge outputs cover dual throttles, cam control and boost solenoids.1
  • Firmware security and multi-user logins suit category-managed racing and scrutineering.1
  • Top logging licence reaches 2,000 channels at 1,000 Hz with 8 log sets.1

Limits

  • Hardware price excludes the firmware package; GPR adds about $1,149 at one US retailer.Medium3
  • Logging beyond diagnostic level needs a paid licence upgrade.13
  • No onboard wideband controller; lambda comes from LTC modules on CAN.12
  • Port injection only; direct-injection engines need the M141 or M181.2

Often compared with

ProductCategoryKey fact
MoTeC M130Standalone ECUsInjector / ignition outputs: 8 / 8
Emtron KV8Standalone ECUsInjector / ignition outputs: 8 / 8
Syvecs S7-PlusStandalone ECUsInjection / PWM outputs: 16 low-side, 10 A max each
Link G5 Voodoo Neo 6Standalone ECUsInjection / ignition drives: 12 / 8
Haltech Nexus R5 VCUStandalone ECUsInjector / ignition outputs: 18 / 12
MaxxECU RACEStandalone ECUsInjector / ignition outputs: 8 peak and hold (8 A) / 8

Frequently asked

Does the MoTeC M150 come with firmware?

No. The M150 is sold as hardware, and you buy a firmware package to run an engine. Retailers list General Purpose packages such as GPA, GPR and GPRP separately, and one dealer states the ECU price covers hardware only. Platform-specific packages also exist for some engines and race series.34

What is the difference between the MoTeC M130 and M150?

The M150 has 12 injector and 12 ignition outputs, 10 half-bridge outputs and 3 CAN buses on 120 pins. The M130 has 8 injector and 8 ignition outputs, 6 half-bridges and 1 CAN bus on 60 pins. The M130 is smaller and lighter, while the M150 handles V12s and more auxiliary control.21

How much logging does the MoTeC M150 have?

The 2015 datasheet lists 250 MB of logging memory, though an earlier brochure says 120 MB. What you can record depends on the licence: Level 1 is diagnostic only, Level 2 allows 200 channels at 200 Hz, and Level 3 allows 2,000 channels at 1,000 Hz across 8 log sets.12

Does the MoTeC M150 support direct injection?

No. MoTeC lists the M150 as a port-injection ECU. The M1 family includes separate direct-injection models, the M141 and M142 in the Sport range and the M181 and M182 in the Pro range, which carry the high-voltage injector drivers DI needs.12

How does a laptop connect to the M150?

M1 ECUs use Ethernet for the PC connection, which MoTeC chose for fast log downloads. Tuning happens in M1 Tune, and data analysis in MoTeC's i2 software. You need a suitable Ethernet cable or adaptor wired into the harness. Older laptops without a spare port can use a USB Ethernet adaptor.2

Can the M150 measure wideband lambda directly?

Not directly. The datasheet lists two narrowband lambda inputs. MoTeC's M1 material says wideband measurement comes through its LTC lambda-to-CAN modules, which allows several sensors at once. Budget for one LTC per sensor when comparing prices. A two-bank engine with closed-loop control per bank needs two.12

Related terms

Sources

Numbered as cited above. Hover or tap a citation chip to preview it.

  1. M150 ECU datasheet, part 13150 (published 1 May 2015) · MoTeC (hosted by a dealer) · vendor-doc · retrieved 2026-11-04
  2. M1 Series ECUs brochure with model specification table · MoTeC (hosted by a dealer) · vendor-doc · retrieved 2026-11-04
  3. MoTeC M150 ECU listing with package and logging options · T1 Race Development · reference · retrieved 2026-11-04
  4. MoTeC 13130AB M130 with GPR package; GPR package 23072 for M130/M150/M170/M190 · Tomson (PL) · reference · retrieved 2026-11-04

A technical overview from published sources; we have not tested this product. Product names are the property of their owners and identify the product only; GAINS is not affiliated with, or endorsed by, the maker.