H-bridge

H bridgefull bridgeH-bridge motor driverbidirectional motor driver

An H-bridge is a circuit of four switches arranged around a load, usually a DC motor, so current can be driven through it in either direction. Turning on diagonal pairs reverses polarity. In vehicles it drives electronic throttle bodies, wastegate and valve actuators, and other motors that must move both ways under precise control.123

How it works

The name comes from the schematic

Two vertical legs, each with a high-side and a low-side switch, and the load across the middle like the bar of an H. Closing the top-left and bottom-right switches pushes current one way; closing the top-right and bottom-left pushes it the other way.1

Speed or force is set by pulse-width modulation of the bridge. Other switch states give braking, where both low-side switches short the motor so its back EMF slows it quickly, and coasting, where all switches are off. TI's DRV8873-Q1 is one automotive example, rated for up to 10 A peak.124

Turning on both switches in the same leg shorts the supply to ground, called shoot-through. Driver chips prevent it with interlocks and dead time between turning one switch off and the other on, and add current limiting, thermal protection and fault reporting.Medium12

In tuning

Electronic throttle bodies use a DC motor working against a return spring, driven by an H-bridge in closed loop with two position sensors. Bosch's motorsport electronic throttle body data sheet is an example of this layout. Poorly tuned control settings show up as overshoot or hunting in logged throttle position.Medium53

Safety note

An electronic throttle is a safety-critical actuator. Its driver must default to cutting motor power so the spring returns the throttle to its limp position on any fault, and plausibility checks between redundant sensors should stay enabled.Medium35

Myths vs facts

Myth Two relays can do anything an H-bridge does.

Fact Relays can reverse a motor, but they cannot switch fast enough for PWM position control and they wear with every cycle. Closed-loop actuators such as electronic throttles need a solid-state H-bridge.Medium12

Myth Braking and coasting are the same as turning the bridge off.

Fact Coast turns all switches off and lets the motor spin down freely. Brake turns on both low-side (or both high-side) switches, shorting the motor so it stops quickly.1

Frequently asked

How does an H-bridge reverse a motor?

It switches which motor terminal connects to positive and which to ground. One diagonal pair of switches drives current left to right through the motor; the opposite pair drives it right to left. Reversing current reverses the torque direction of a brushed DC motor.1

Why does an electronic throttle need an H-bridge?

The throttle motor must drive the plate both open and closed against its return spring, and hold precise positions. An H-bridge lets the controller apply torque in either direction with PWM, so a closed-loop controller can track the target position from the throttle position sensors.Medium351

What is shoot-through in an H-bridge?

Shoot-through is when the high-side and low-side switches in the same leg are on together, shorting the supply directly to ground. It can destroy the switches in microseconds. Driver ICs prevent it with logic interlocks and a short dead time during every transition.Medium12

What is the difference between brake and coast mode?

In coast mode, all four switches are off and the motor spins down on its own. In brake mode, the controller turns on both low-side switches, shorting the motor terminals so back EMF drives a current that opposes rotation and stops the motor faster.12

Sources

Numbered as cited above. Hover or tap a citation chip to preview it.

  1. H-bridge · Wikipedia · reference · retrieved 2026-10-27
  2. DRV8873-Q1 automotive H-bridge motor driver data sheet (SLVSDY7) · Texas Instruments · vendor-doc · retrieved 2026-10-27
  3. Electronic throttle control · Wikipedia · reference · retrieved 2026-10-27
  4. Pulse-width modulation · Wikipedia · reference · retrieved 2026-10-27
  5. Electronic Throttle Body data sheet 68749835 · Bosch Motorsport · vendor-doc · retrieved 2026-10-27