Turbosmart · Boost controllers

Turbosmart eBoost2

Digital gauges≈ $804 USD (60 mm Sleeper, 4-port kit, maker store)

The Turbosmart eBoost2 is a self-contained electronic boost controller built into a 60 mm or 66 mm billet gauge. It controls up to 60 psi (about 4.1 bar) as standard, or 120 psi in HP120 form, with up to six boost settings by gear, RPM or time, overboost shutdown and an auxiliary output for water, methanol or nitrous. The eBoost3 has since joined the range.12

1.4 bar
Illustration, not the product.

Key facts

Max boost
  • 60 psi≈ 4.1 bar
  • 120 psi HP120 version
Sourced1
Boost settingsUp to 6Sourced1
Strategies
  • By gear, RPM, time
  • Boost on demand
Sourced1
Gauge sizes60mm or 66 mmSourced1
Price (US)≈ $80460 mm Sleeper, 4-portTurbosmart store price seen November 2026.Sourced1

Suits

  • Turbo street and race cars whose ECU lacks boost control
  • Owners who want boost by gear and push-to-pass on the dash
  • Very high-boost drag builds (HP120 versions)

What it is and where it fits

The Turbosmart eBoost2 is an electronic boost controller housed in a gauge.

It controls, monitors and compensates boost through a solenoid in the wastegate signal line, so it works with any turbo system regardless of the ECU.Medium1

Turbosmart says the eBoost2 has been on sale for more than a decade. It suits street cars and race cars where the ECU lacks closed-loop boost control, or where the owner wants boost adjustment on the dash.Medium1

Hardware and I/O

The controller, display and pressure sensing sit in one billet aluminum pod in 60 mm or 66 mm sizes.

Sleeper versions have a plain face; Black and Silver versions have a styled bezel.Medium1

Standard units control up to 60 psi (about 4.1 bar). HP120 versions extend that to 120 psi for very high-boost builds.1

The 4-port kit ships with a 4-port solenoid that Turbosmart says gives a wider tuning window. A 3-port solenoid kit sells separately as a spare.13

Software and configuration

Setup runs on the unit through its menus; Turbosmart describes it as easy and logical.

Up to six boost settings switch by gear, RPM or elapsed time, and boost on demand gives a push-to-pass step.1

RPM compensation and the Turbosmart Gate feature shape how boost builds. Overboost shutdown cuts boost control if pressure exceeds the set limit, and peak hold recalls the maximum boost seen.1

Connectivity and expansion

An auxiliary output can drive water spray, methanol or nitrous injection, or shift and warning lights.

The unit reads RPM so it can show live boost or RPM.1

Turbosmart lists no CAN or data logging output for the eBoost2. Its successor, the eBoost3, adds logging of RPM, boost and input data.Medium12

Installation notes

The pod mounts like a gauge; Turbosmart sells a 60 mm dash mounting system that suits both eBoost2 and eBoost3.

A high-pressure hose fitting kit and a re-loom kit are available as spares.3

Generations and variants

The eBoost2 range covers 60 and 66 mm sizes, Sleeper and Black or Silver faces, 4-port kits and HP120 high-pressure versions.

Replacement head units sell for about $607.13

The eBoost3 builds on the eBoost2 with a full-color LCD, a rotating click bezel, an integrated 3 bar sensor and support for single or twin solenoids, CO2 systems and electronic wastegates. Turbosmart lists it from about $793 for the 60 mm unit.2

Specifications

From the maker's published data and independent sources.

Control and features

SpecValueSource
Boost rangeUp to 60 psi (≈ 4.1 bar) standard; 120 psi (≈ 8.3 bar) in HP120 versions1
Boost settingsUp to 6, with boost by RPM, time and gear1
Push to passBoost on demand1
CompensationRPM compensation and Turbosmart Gate feature1
SafetyOverboost shutdown; peak hold and max boost recall1
Auxiliary controlWater spray, methanol or nitrous injection; shift and warning lights1
ReadoutLive boost or RPM1

Hardware and part numbers

SpecValueSource
HousingBillet aluminum gauge pod; developed, made and hand assembled in Australia1
60 mmSleeper TS-0301-1003; Black/Silver TS-0301-10021
66 mmSleeper TS-0301-1011; Black/Silver TS-0301-10131
4-port60 mm Sleeper TS-0301-1103, supplied with a 4-port solenoid1
HP12060 mm Sleeper TS-0301-1120; 4-port TS-0301-11211
SparesReplacement 60 or 66 mm head unit ≈ $607; 3-port solenoid kit ≈ $167; re-loom kit ≈ $1603

Strengths and limits

Facts, each cited. Not a score.

Strengths

  • Self-contained: controller and display in one gauge pod, independent of the ECU.Medium1
  • Up to six boost settings by gear, RPM or time, plus push-to-pass.1
  • Overboost shutdown and an auxiliary output for water, methanol or nitrous.1
  • HP120 versions handle up to 120 psi.1

Limits

  • No CAN output or data logging listed; the eBoost3 adds logging.Medium12
  • No electronic wastegate or CO2 support listed; the eBoost3 supports both.Medium2
  • Standard units top out at 60 psi; higher needs the HP120 version.1

Often compared with

ProductCategoryKey fact
GReddy ProfecBoost controllersBoost presets: Lo, Hi and Scramble

Frequently asked

How much boost can the Turbosmart eBoost2 control?

Standard eBoost2 units control up to 60 psi, about 4.1 bar. HP120 versions, part numbers TS-0301-1120 and TS-0301-1121, extend the range to 120 psi for very high-boost builds. The turbo, wastegate spring and engine set the practical limit well before that.1

What is the difference between eBoost2 and eBoost3?

The eBoost3 adds a full-color LCD, a rotating click bezel, an integrated 3 bar sensor and data logging. It also supports single or twin solenoids, CO2 systems and electronic wastegates. Both offer up to six boost settings and overboost shutdown. Turbosmart lists the 60 mm eBoost3 from about $793.21

Does the eBoost2 do boost by gear?

Yes. The eBoost2 offers up to six boost settings that can switch by gear, by RPM or by time, plus boost on demand for a push-to-pass step. RPM compensation and the Turbosmart Gate feature shape how boost builds.1

What is the eBoost2 4-port version?

It is the 60 mm Sleeper eBoost2, part TS-0301-1103, supplied with a 4-port solenoid instead of the 3-port type. Turbosmart says this gives a wider tuning window and more tuning options. An HP120 4-port version, TS-0301-1121, also exists.13

Does the eBoost2 have overboost protection?

Yes. Turbosmart lists overboost shutdown, which stops boost control when pressure passes the set limit, along with peak hold and max boost recall. It does not replace a correctly chosen wastegate spring or ECU-level boost cut.Medium1

Can the eBoost2 control water-methanol injection?

Turbosmart states the eBoost2 can control water spray, methanol or nitrous injection, and manage shift and warning lights, through its auxiliary output. It also reads RPM. Check the injection kit's own controller requirements before wiring it this way.1

Related terms

Sources

Numbered as cited above. Hover or tap a citation chip to preview it.

  1. eBoost2 60mm Electronic Boost Controller (Sleeper) - 4 Port product page · Turbosmart · vendor-doc · retrieved 2026-11-04
  2. eBoost3 3 bar 60mm Black product page · Turbosmart · vendor-doc · retrieved 2026-11-04
  3. eB2 replacement head unit, solenoid kit, re-loom kit and dash mount listings · Turbosmart · vendor-doc · retrieved 2026-11-04

A technical overview from published sources; we have not tested this product. Product names are the property of their owners and identify the product only; GAINS is not affiliated with, or endorsed by, the maker.