Key facts
Suits
- Turbo street and track cars wanting simple Lo, Hi and Scramble boost
- Installs where a small dash display is preferred
- Owners upgrading from older Profec models
What it is and where it fits
The GReddy Profec is an electronic boost controller that sets boost through a solenoid in the wastegate signal line.
It works with factory-style pneumatic actuators and with external wastegates.1
It suits street and track turbo cars that want two or three switchable boost levels on a small dash display. GReddy marks it for competition use only in the US, as the listing notes it is not legal on public roads there.1
Hardware and I/O
The system splits into a slim head unit with a blue OLED screen in the cabin and a waterproof sensor box in the engine bay.
Only one thin harness passes through the firewall.1
GReddy lists a 300 kPa (43.5 psi) integrated pressure sensor, a smaller solenoid valve and a faster processor than earlier units, which it says give quicker response and steadier boost curves.Medium1
The head unit can mount upright or rotated 180°, on the supplied adjustable bracket or flush in a panel.1
Software and configuration
Programming is on the head unit with two buttons and a rotary dial.
Lo and Hi presets cover normal driving, and a third Scramble setting gives a temporary boost increase.1
Boost shows as numbers, a bar graph or a graph. The unit recalls last boost and peak boost and has a programmable audible and visual warning.1
Connectivity and expansion
GReddy's listing shows no CAN, data logging or auxiliary outputs.
The Profec is a standalone controller and does not share data with an ECU or dash.Medium1
Installation notes
The sensor box and solenoid stay in the engine bay, so most of the hose work is under the hood.
A hardware set covers 4 mm and 6 mm hoses, fittings, clamps, a tee and the solenoid bracket.12
GReddy sells a 4 mm in-line filter for the solenoid inlet and an optional cone filter for the outlet. A 1.5 m solenoid extension harness helps when the valve sits far from the sensor box.32
Generations and variants
Earlier GReddy controllers include the Profec B-spec 2, Profec e-01 and Profec Type-S.
Those use a different replacement solenoid (15900535) from the current Profec's mini valve (15900552).2
The current Profec is part 15500214 with a blue OLED display. GReddy sells the head unit, sensor box, solenoid and harnesses as separate spares.12
Specifications
From the maker's published data and independent sources.
Control and features
Hardware
| Spec | Value | Source |
|---|---|---|
| Head unit | Ultra-slim control unit, large blue OLED display, two buttons and a rotary dial; mounts upright or rotated 180°, bracket or flush | 1 |
| Sensor unit | Separate waterproof box in the engine bay; one thin harness through the firewall | 1 |
| Pressure sensor | Integrated 300 kPa (43.5 psi) | 1 |
| Solenoid | Mini 3-port solenoid valve with plug-in connector (15900552) | 2 |
| Part number | 15500214 (blue) | 1 |
Strengths and limits
Facts, each cited. Not a score.
Strengths
Often compared with
| Product | Category | Key fact |
|---|---|---|
| Turbosmart eBoost2 | Boost controllers | Max boost: 60 psi (≈ 4.1 bar); 120 psi HP120 version |
Frequently asked
How much boost can a GReddy Profec control?
GReddy lists an integrated 300 kPa (43.5 psi) pressure sensor, which sets the measuring range. GReddy does not state a separate maximum control figure or whether the sensor reads absolute or gauge pressure. The turbo, wastegate spring and engine limit boost well before that in most builds.Medium1
What is Scramble boost on the GReddy Profec?
Scramble is a third boost setting above the Lo and Hi presets, used for a temporary increase such as overtaking or a drag pass. The Profec switches between Lo, Hi and Scramble from the head unit. Set the safety limiter above the Scramble target.Medium1
Does the GReddy Profec work with an external wastegate?
Yes. GReddy states the Profec works with standard pneumatic actuators and with external wastegates. It uses a mini 3-port solenoid valve that plugs into the sensor unit harness.12
What is the difference between the Profec and Profec B-spec 2?
The B-spec 2 is an earlier GReddy controller. The current Profec, part 15500214, uses a blue OLED head unit, a separate waterproof sensor box, a 300 kPa sensor and a mini solenoid valve. The B-spec 2, e-01 and Type-S use a different replacement solenoid, 15900535.21
Where do you mount the GReddy Profec sensor unit?
In the engine compartment. GReddy designed the sensor box to be waterproof so the pressure sensor and hoses stay under the hood, with only one thin harness running through the firewall to the head unit in the cabin.1
Does the GReddy Profec have overboost protection?
Yes. The Profec has a safety limiter setting for over-boost situations and a programmable audible and visual boost warning. It also shows peak hold and last boost, which helps spot spikes after a run.1
Related terms
Sources
Numbered as cited above. Hover or tap a citation chip to preview it.
- Profec Boost Controller - Blue (15500214) product page · GReddy Performance Products · vendor-doc · retrieved 2026-11-04
- Replacement Profec Boost Controller Components · GReddy Performance Products · vendor-doc · retrieved 2026-11-04
- Profec 4mm In-line Filter (15900011) · GReddy Performance Products · vendor-doc · retrieved 2026-11-04
A technical overview from published sources; we have not tested this product. Product names are the property of their owners and identify the product only; GAINS is not affiliated with, or endorsed by, the maker.

