How it works
The volute is the spiral passage that feeds exhaust into the turbine wheel.
Its cross-section shrinks around the spiral, and A/R is taken at a reference point near the tongue. Because area and radius are both lengths, A/R is quoted in the housing's own units, such as 0.63 or 0.82, and is only comparable within one turbo family.Medium31
A smaller turbine A/R accelerates the gas and directs it more tangentially onto the wheel, so turbine speed and boost rise earlier. The cost is a tighter passage and higher pressure upstream of the turbine at high engine speed. Garrett notes that a smaller turbine housing trades away peak power for response because of that extra back pressure.21
If the A/R is too large, the turbo fails to build boost at low speed; if too small, it chokes the engine at high speed with high exhaust manifold pressure and pumping losses. Variable-geometry turbos change the effective aspect ratio with movable vanes to get both behaviors.Medium1
Compressor housings also have an A/R, but its effect on response is smaller. Changing turbine A/R is the usual way to shift a turbo's powerband without changing wheels, and many aftermarket turbo families offer several turbine housings for the same core.Medium23
In tuning
A turbine A/R change moves the boost threshold, the wastegate demand and exhaust back pressure, so boost control, ignition and fuel tables all need revisiting. A smaller housing usually needs more wastegate flow at high rpm to avoid boost creep, and its higher back pressure raises residual gas and knock tendency.Medium245
Formula and worked example
A/R = A / R
- A
- cross-sectional area of the volute at the reference sectionin² or cm²
- R
- radius from the turbo shaft centerline to the centroid of that areain or cm
Myths vs facts
Frequently asked
What does A/R mean on a turbo?
A/R stands for area over radius. It is the cross-sectional area of the housing's spiral passage divided by the distance from the shaft center to the center of that area. On the turbine side it sets how fast and at what angle exhaust gas hits the wheel, which shapes spool speed and high-rpm back pressure.Medium13
Is a bigger or smaller A/R better?
Neither is better in general. A smaller turbine A/R builds boost earlier and suits response-focused cars such as autocross, at the cost of more back pressure and less peak power. A larger A/R suits sustained high-rpm use such as track days, with a later boost threshold. Choose for the rpm range the engine actually uses.2
How does A/R affect turbo spool?
A smaller turbine A/R increases gas velocity into the wheel, so the turbo reaches useful speed at lower exhaust flow and boost arrives sooner. A larger A/R lowers gas velocity and back pressure, so boost arrives later but the engine breathes more freely near redline.12
Does compressor housing A/R matter?
It matters less than turbine A/R for response. Compressor housing A/R affects how the diffused air recovers pressure and can shift efficiency slightly, but most turbo families tune response and back pressure by offering different turbine housings for the same compressor.Low23
Sources
Numbered as cited above. Hover or tap a citation chip to preview it.
- Turbocharger · Wikipedia · reference · retrieved 2026-10-27
- Turbo Tech 101 (Basic): how a turbo system works · Garrett Motion · vendor-doc · retrieved 2026-10-27
- Automotive Handbook, 10th edition (2018) · Robert Bosch GmbH / Wiley · book · retrieved 2026-10-27
- Internal Combustion Engine Fundamentals, 2nd edition (2018) · McGraw-Hill (John B. Heywood) · book · retrieved 2026-10-27
- Wastegate · Wikipedia · reference · retrieved 2026-10-27

