F87 · 2016-2021 · Circuit · N55, S55

BMW M2 (F87) track build

BMW M2 / M2 Competition / M2 CS

An f87 track build starts from a short, stiff, rear-drive coupe that copes with track days well once three things are handled. Fix the brakes first with high-boiling fluid and track pads. Then protect the oil system: the N55 M2 has a factory sump that owners report starving under long hard corners, and the S55 cars have an exposed low oil cooler and a crank hub that can slip. Rear bushing compliance comes after that.Medium1235

Key takeaways

  • The base M2 (2016-2018) uses the N55; the Competition and CS (2019-2021) use the S55 with BMW's track-developed oil supply and extra cooling.
  • Brake fluid and pads come first. Stock street pads and fluid are the most common first-day limit on any heavy, fast car.
  • On the N55 car, a baffled sump and an oil-pressure gauge with a warning are the usual reliability steps before long sessions.
  • On S55 cars, guard the low-mounted oil cooler and treat the crank hub as a known risk, especially if the engine is tuned.
  • Rear toe-link and trailing-arm bushings let the rear move under heavy braking; owners fix this with adjustable or spherical links.
  • Log oil temperature, oil pressure, coolant and lap times from the first event so every later change is judged on data.

Weak points on track

What this platform does under sustained load, and the fix.

  1. 1Oil pressure dips on the N55 M2 under long, hard corners and heavy braking

    Usual cause

    Owners report oil pooling away from the pickup in the N55 sump, which lacks the extra baffling and scavenge provisions BMW added to the S55 cars.

    Fix

    Fit a baffled sump or sump baffle kit, keep the oil at the full mark, add an oil-pressure sensor with a warning light, and some owners add an oil accumulator.Low341

  2. 2S55 crank hub can slip (spun crank hub) on M2 Competition and CS

    Usual cause

    The factory crank hub locates the timing sprocket by clamp friction; sellers and owners report it slipping on stock and tuned engines, which upsets cam timing.

    Fix

    Fit a pinned or one-piece crank hub and capture plate before the engine sees regular track use or a tune, installed with the correct timing tools.Low56

  3. 3Exposed engine oil cooler on the M2 Competition

    Usual cause

    The additional oil cooler sits low at the front, where track debris or a kerb strike can puncture it and dump the engine oil quickly.

    Fix

    Fit a guard or skid plate over the cooler and check it at every session break.Low71

  4. 4Rear instability and toe change under heavy braking

    Usual cause

    Large rubber bushings in the rear toe links and trailing arms let the rear wheels toe out under load on a short-wheelbase, nose-heavy car.

    Fix

    Check the alignment first, then fit adjustable rear toe links with spherical or stiffer bushings and realign.Low89

  5. 5Differential movement and clunk under power

    Usual cause

    The rear differential uses a single rear mount on the subframe, so the housing can pivot under torque, worse with worn front diff bushings.

    Fix

    Stiffer diff bushings or a dual-mount bracket kit; some kits need subframe clearancing, which is a permanent change.Low11

Build plan

Safety and reliability first, then speed.

1

Stage 1: first track days

For a mostly stock M2 doing HPDE (High Performance Driver Education) days. It removes the brake, tire and safety limits that end most first events early.

  • Safety
    Helmet to the event's current standard (Snell SA or FIA) $$Every HPDE organizer requires a helmet, and many name the accepted standards; check the current list before buying.1618
  • Brakes
    Brake fluid: high-boiling DOT 4 racing fluid, freshly bled $A racing DOT 4 fluid such as one rated at 594 °F (312 °C) dry boiling point resists the soft pedal that street fluid shows once rotors get hot.13
  • Brakes
    Brake pads: track-compound pads, or at least fresh high-temperature street-track pads $$Street pads overheat and fade on a 3,400 lb (1,550 kg) class car; owners who changed pads and fluid reported better fade resistance.Low102
  • Tyres and wheels
    Tires: 200-treadwear performance tires with good tread and recent date codes $$$The 200-treadwear class is the common baseline in time-trial rules and gives consistent grip and heat tolerance.Medium14
  • Alignment
    Alignment check with a little more front negative camber within factory adjustment $A bad toe setting can make the car feel unstable on track; owners found alignment faults before suspension faults.Low9
  • Oiling
    Oil level to the full mark and a fresh change before the event $Extra oil volume above the minimum delays pickup uncovering in long corners, which matters most on the N55 car.Low3
2

Stage 2: reliability for regular track use

For drivers doing several days a season or running longer sessions. It protects the engine and keeps the car consistent from lap 1 to lap 15.

  • Oiling
    N55 M2: baffled oil sump or sump baffle kit $$Keeps oil around the pickup under lateral and braking loads; the S55 cars already have BMW's extra sump cover.Low41
  • Powertrain
    S55 cars: pinned or one-piece crank hub with capture plate $$Removes the friction-only timing location that can slip; most owners do it before tuning or regular track use.Low56
  • Cooling
    S55 cars: oil cooler guard or skid plate $A punctured low oil cooler can drain the engine in seconds on track.Low7
  • Electronics and data
    Oil pressure and oil temperature sensors with a dash warning $$Starvation and overheating show up in the data before they show up as bearing damage.Low3
  • Brakes
    Brake cooling: ducts or backing-plate deflectors to the front rotors $$Lower rotor and caliper temperatures extend pad life and delay fluid boiling on a heavy car.Low10
3

Stage 3: performance

For time-trial or advanced HPDE drivers. It adds grip and control once the car is reliable, and moves the car into higher rules classes.

  • Suspension
    Adjustable rear toe links and trailing-arm bushings (spherical or solid) $$Reduces toe change under braking and cornering; trades some noise and vibration for control.Low812
  • Suspension
    Coilovers or adjustable dampers with camber plates $$$Lets you set ride height, damping and front camber for wider, stickier tires.Low8
  • Driveline
    Differential bushings or dual-mount diff bracket $$Controls diff housing movement under torque; check whether the kit needs subframe clearancing.Low11
  • Tyres and wheels
    Lighter, wider wheels and a dedicated track tire set $$$Wider or softer tires usually move the car up a class, so check the rules before buying.Medium14
  • Seat and controls
    Fixed-back seat and harness only with a proper roll bar $$$A harness without a bar and matching seat can be less safe in a rollover; many convertible and harness rules point to an approved bar.Medium17

Platform overview

This f87 track build guide covers all three F87 M2 versions built from 2016 to 2021.

BMW rates the base M2's N55 at 365 hp, the M2 Competition's S55 at 405 hp, and the M2 CS at 444 hp, all with a 6-speed manual or 7-speed M-DCT dual-clutch.Medium21

The car is short and front-heavy for its power. Published curb weights differ by source and version, roughly 3,300-3,640 lb (1,495-1,650 kg), and the Competition is about 165 lb (75 kg) heavier than the base car, which loads the brakes and tires harder.Medium2

The version you start from changes the plan. An N55 car needs oil-system attention first; an S55 car already has BMW's track-tested oil supply but brings the crank-hub and oil-cooler items.Medium135

Powertrain: N55 vs S55 on track

BMW describes the M2 Competition's oil supply and cooling as developed with its racing experience, including an extra sump cover that limits oil movement in fast direction changes. That change was not present on the base N55 M2.1

The S55 crank hub is the main S55 reliability topic. Its timing sprocket relies on clamp friction, and sellers report slips on both stock and tuned engines. A pinned or one-piece hub is the usual preventive fix and needs timing tools to install.Low56

Leave power for last. More power adds heat, brake load and crank-hub stress, so reliability items come first. No power figures are given here beyond BMW's own ratings.Medium62

Cooling and oiling

BMW lists the M2 Competition cooling layout as one central radiator, two side radiators and an additional engine oil cooler, carried over from the M4 Competition Package. That gives the S55 cars more cooling headroom than the base car.1

On N55 cars, owners have logged oil pressure dropping below idle pressure under hard braking on track without a sump baffle. Treat this as owner data, but it is consistent enough that a baffle and a pressure warning are standard advice.Low34

The S55 car's extra oil cooler sits low and exposed. Parts makers sell guards because a strike can drain the engine oil fast, so look under the nose after any off-track excursion.Low7

Brakes

Brakes are the first limit on most M2s at a track day.

Bleed in a racing DOT 4 fluid with a high dry boiling point and fit pads rated for track temperatures before the first event.Medium1310

The Competition offered optional larger brakes with 400 mm (15.7 in) front and 380 mm (15.0 in) rear rotors, and the CS has them as standard. A base car with standard brakes benefits more from cooling ducts and pad choice.Medium2

Carry a spare set of pads and check thickness at every break. Track pads wear fast on a heavy car, and a pad worn to the backing plate damages the rotor and caliper.Low10

Suspension, alignment and tires

Start with an alignment check.

Owners chasing rear instability have found bent or out-of-spec toe before any design fault.Low9

The rear toe links and trailing arms use large rubber bushings. Owners report the rear toeing out and moving under heavy braking, and fix it with adjustable links using spherical bearings or solid bushings.Low812

Tires decide your class as much as your lap time. In SCCA Time Trials, Sport category tires need a UTQG treadwear grade of at least 200, and wider tires can bump a car into a higher class.14

Data and electronics

Log oil pressure, oil temperature, coolant temperature and lap times from day one.

A GPS lap timer plus an OBD or CAN data logger shows whether a change helped and catches oil-pressure dips before they cost an engine.Low3

Rules and classes

This is general information, not a rulebook.

NASA HPDE runs four levels: HPDE 1 includes an instructor, HPDE 2 is solo at similar pace, and HPDE 3 and 4 add more passing. New drivers in HPDE 4 need the chief instructor's approval.15

SCCA Track Night in America asks for a license, a car in good condition and a helmet, with extra rules for convertibles. SCCA Time Trials classes cars by make and model in Sport and Tuner, so read the class tables before modifying.161714

In the UK, Motorsport UK publishes the helmet standards it recognizes, and circuits set their own track-day rules. In Australia, Motorsport Australia's Schedule D sets minimum apparel by event type, and event regulations can ask for more.1819

Fit tow hooks or straps and carry a fire extinguisher if the event rules ask for them. Requirements vary by organizer and venue, so check the supplementary regulations for each event.Medium1619

Frequently asked

Is the BMW M2 good on track?

Yes, with preparation. The F87 M2 is a short, rear-drive coupe with plenty of power, and owners run it at HPDE and time-trial events. Its limits on track are brakes first, then oil control on the N55 car and the crank hub and oil cooler on S55 cars. Fix those before adding grip or power.Medium235

Does the N55 M2 have oil starvation on track?

Owners report it. Logged data on forums shows oil pressure dipping under hard braking and long corners on N55 cars without a baffle. BMW added an extra sump cover to the S55 M2 Competition to limit oil movement. Common fixes are a baffled sump, a full oil level and an oil-pressure warning; some owners also add an accumulator.Low314

Should I upgrade the S55 crank hub before track days?

Many owners do, especially before a tune. The factory hub holds the timing sprocket by friction, and sellers report slips on stock and modified S55 engines. A pinned or one-piece hub with a capture plate is the usual fix. It needs timing tools, so it is a job for someone who has done S55 timing work before.Low56

M2 or M2 Competition for track days?

The Competition has the S55 with BMW's track-developed oil supply and extra radiators and oil cooler, so it needs fewer oil-system parts. It is also about 75 kg (165 lb) heavier and brings the crank-hub and exposed oil-cooler items. The base N55 car is lighter but needs a baffle and oil-pressure monitoring.Medium127

What brake fluid should I run in an M2 for track days?

Use a racing DOT 4 fluid with a high dry boiling point, bled fresh before the event. Fluids in this class are rated near 594 °F (312 °C) dry. Brake fluid absorbs water and its boiling point drops with age, so change it more often than the service schedule when the car sees regular track use.13

Do I need a roll bar to run a harness in an M2?

In practice, yes. A harness needs a correct anchor point behind and level with the shoulders, which a roll bar or cage provides, and a seat that supports it. Many organizers restrict harnesses in cars without a bar, so check the event and venue rules before fitting one.Medium1716

Related

Sources

Numbered as cited above. Hover or tap a citation chip to preview it.

19 sources
  1. The first-ever 2019 BMW M2 Competition · BMW Group PressClub USA · oem · retrieved 2026-11-04
  2. BMW M2 · Wikipedia · reference · retrieved 2026-11-04
  3. Addressing N5x oiling and spun rod bearings (Accusump installed) · SpoolStreet forum · community · retrieved 2026-11-04
  4. MMR/MMX baffled sump plate, BMW M2 · AP Automotive · vendor-doc · retrieved 2026-11-04
  5. Double-keyed 4-pin crank hub, F87 M2 / F80 M3 / F82 M4 (S55) · BimmerWorld · vendor-doc · retrieved 2026-11-04
  6. BMW M2 Competition in for a crank hub · Garage Whifbitz · vendor-doc · retrieved 2026-11-04
  7. Engine oil cooler, genuine BMW, F80 M3 / F82 M4 · BimmerWorld · vendor-doc · retrieved 2026-11-04
  8. F87 M2 rear instability under braking thread · F87 Bimmerpost forum · community · retrieved 2026-11-04
  9. F87 M2 poor track handling traced to alignment thread · F87 Bimmerpost forum · community · retrieved 2026-11-04
  10. M2 track prep: rear toe arms, pads and high-temp fluid thread · G87 Bimmerpost forum · community · retrieved 2026-11-04
  11. Differential dual-mount bushing set (offset), F8X M2/M3/M4 · BimmerWorld · vendor-doc · retrieved 2026-11-04
  12. Solid rear control arm bushes, BMW F87 M2 · Suspension Secrets via R44 Performance · vendor-doc · retrieved 2026-11-04
  13. RBF 600 Factory Line racing brake fluid · Motul · vendor-doc · retrieved 2026-11-04
  14. Time Trials Sport Category tires, full rules · SCCA Time Trials · standard · retrieved 2026-11-04
  15. NASA event page: HPDE group descriptions · National Auto Sport Association · standard · retrieved 2026-11-04
  16. Track Night in America frequently asked questions · SCCA Track Night in America · standard · retrieved 2026-11-04
  17. Track Night in America convertible policy and required car safety equipment · SCCA Track Night in America · standard · retrieved 2026-11-04
  18. Recognised helmet standards · Motorsport UK · standard · retrieved 2026-11-04
  19. 2025 Schedule D: apparel · Motorsport Australia · standard · retrieved 2026-11-04

General information from published sources and owner reports; not a guarantee of results. Motorsport is dangerous: follow your event's rules and a qualified technician's advice.