Traction control (engine-based)

TCSASRtraction control systemslip controlanti-slip regulation

Traction control is a system that limits driven-wheel slip by reducing engine torque, and in many cars by braking a spinning wheel. Engine-based traction control compares driven and undriven wheel speeds and cuts torque through throttle, ignition retard, spark cut or fuel cut when slip exceeds a target.12

How it works

Tires give the most drive force at a small amount of slip.

Beyond that, grip falls and the wheel spins. Traction control measures slip and holds it near the best value instead of letting it run away.13

Slip is the difference between driven wheel speed and vehicle speed, usually taken from undriven wheels, divided by vehicle speed. Bosch's ASR systems in series production combined engine intervention with brake intervention, according to a 1990 SAE paper.21

Engine torque can be cut in several ways. Throttle closing is smooth but slow. Ignition retard is fast and smooth for small cuts.

Spark or fuel cut to selected cylinders is fastest for large cuts but harsher. Production systems often combine them.Medium13

On cars with electronic throttle, the traction controller can request a torque reduction over the vehicle network, and the engine controller chooses how to deliver it. Brake intervention on one wheel can also act like a limited-slip differential.Medium14

In tuning

Key parameters are the slip target, often a table by vehicle speed, the controller gains and the torque-cut methods allowed.

Too low a target bogs the car; too high lets it spin. Logs of driven and undriven wheel speed show how close the system holds its target.Medium1

Correct wheel speed scaling is essential. Different tire diameters front and rear create false slip. Tire size changes require updating the wheel speed calibration or the system misreads slip.Medium1

Formula and worked example

s = (v_driven − v_vehicle) / v_vehicle × 100%
s
driven wheel slip%
v_driven
driven wheel surface speedkm/h or mph
v_vehicle
vehicle speed, usually from undriven wheelskm/h or mph
13

Try it

%
%
mph

Result

New diameter25.58 in
Current diameter25.72 in
Diameter / speedometer change-0.54 %
Actual speed at that reading59.7 mph
New revs per mile788

Planning estimate from the formula below, not a measurement.

Open the full tire size calculator →

Myths vs facts

Myth Traction control only uses the brakes.

Fact Many systems cut engine torque as well, and some use only engine intervention. Bosch's ASR families include engine-only and combined designs.2

Myth Traction control makes cars slower.

Fact When grip is the limit, holding the best slip can accelerate faster than uncontrolled wheelspin. Conservative road settings can feel slow.Medium1

Frequently asked

How does traction control work?

Wheel speed sensors let the controller compare driven and undriven wheels. When the driven wheels turn faster than the car is moving by more than a target, the system reduces engine torque by closing the throttle, retarding ignition or cutting spark or fuel. Many systems also brake the spinning wheel.12

What is wheel slip?

Wheel slip is how much faster a driven wheel turns than the vehicle is moving, as a percentage of vehicle speed. A small amount of slip is needed to transmit drive force, and tires typically give peak drive at a modest slip value. Beyond that, grip drops and the wheel spins.13

Does traction control use the brakes or the engine?

Either or both. Engine intervention reduces torque through throttle, ignition retard, or spark or fuel cut. Brake intervention slows a spinning wheel and sends torque across an open differential to the wheel with grip. Bosch's ASR systems used engine-only and combined engine-and-brake designs.21

Should you turn off traction control?

On public roads, it is generally safest left on. Some drivers disable it to rock a car free of snow or mud, where some wheelspin helps, or on a track with a calibration better suited to the tires. Many cars offer intermediate modes that allow more slip instead of full off.Medium1

Wiring, pinouts and parts

Used in these guides

Sources

Numbered as cited above. Hover or tap a citation chip to preview it.

  1. Traction control system · Wikipedia · reference · retrieved 2026-10-25
  2. ASR Traction Control, State of the Art and Some Prospects (SAE 900204) · SAE International · sae-paper · retrieved 2026-10-25
  3. Automotive Handbook, 10th edition · Robert Bosch GmbH · book · retrieved 2026-10-25
  4. Electronic throttle control · Wikipedia · reference · retrieved 2026-10-25