Sensor type · Variable reluctance (VR, AC) · Hall effect (digital)
Wheel speed and vehicle speed sensors (VSS)
Wheel and vehicle speed sensors count teeth on a tone ring or transmission gear. Like crank sensors they are VR (two wires, AC output) or Hall (supply, ground and digital output). A standalone ECU or PDM uses the frequency for speed-based features such as launch, traction control and gear detection.Medium327
Parts in the library
Support across ECUs
Across the 6 parts in this hub (6 with a maker-verified pinout). Open a part for the setup notes and sources.
Trademarks belong to their owners. Names are used only to identify compatible products; no endorsement is implied.
How it works
Speed is pulses per second divided by teeth per revolution, times tyre circumference. The input must handle the highest frequency: Bosch's Mini-HA-P is rated to 10 kHz.Medium3
A transmission VSS reads output-shaft speed for the speedometer; wheel sensors on an ABS ring read each wheel for traction control.Medium7
Types and variants
Wiring
Shield VR wheel-speed wiring like crank wiring. Hall sensors need a supply and, for open-collector outputs, a pull-up.Medium36
Common faults and checks
Frequently asked
How do I get vehicle speed into a standalone ECU?
Wire a wheel or transmission speed sensor to a frequency-capable input and enter the teeth per revolution and tyre size. Hall sensors need a supply and pull-up; VR sensors need a VR-capable input.Medium37
Related
Use it with GAINS
Wheel speed and vehicle speed sensors on GAINS hardware
GAINS hardware is pre-release concept design. Pin numbers come from the ECU2 v0.3 pin map and the PDM2 specification and can change before release; none of it has been tested on a vehicle yet.45
Concept Pre-release hardware. Pin assignments come from the current design documents and may change.
Sources
- Automotive Handbook, 10th edition (2018) · Robert Bosch GmbH / Wiley · book · retrieved 2026-10-27
- Inductive Speed Sensor IS-C data sheet · Bosch Motorsport (Bosch Engineering GmbH) · vendor-doc · retrieved 2026-10-27
- Speed Sensor Hall-Effect Mini-HA-P sealed data sheet 69875339 · Bosch Motorsport (Bosch Engineering GmbH) · vendor-doc · retrieved 2026-10-27
- internal GAINS internal: ECU2 concept and pin map v0.3 (hardware/mini-ecu/CONCEPT.md §3)
- internal GAINS internal: PDM2 input and output specification (hardware/mini-pdm/SPEC.md)
- Shielded cable · Wikipedia · reference · retrieved 2026-10-27
- Vehicle speed sensor · Wikipedia · reference · retrieved 2026-10-27
Not yet indexed: fewer than 4 FAQs.

