Gear ratio calculator

Road speed (mph) = rpm × tire diameter (in) ÷ (gear ratio × final drive × 336.13). Use it to check speed in each gear, cruise rpm and how a final-drive or tire change will feel.

rpm
:1
:1
in

Result

Road speed145.2 mph

Planning estimate from the formula below, not a measurement.

How it works

The formula, the method step by step, then a worked example.

mph = rpm × tire diameter ÷ (gear × final drive × 336.13)
  1. Wheel rpm is engine rpm divided by the overall ratio (gear × final drive).
  2. Each wheel revolution covers one tire circumference; 336.13 converts inches per minute to mph for a diameter input.

Worked example

Inputs

Engine speed
7000 rpm
Gear ratio
1 :1
Final drive
3.73 :1
Tire diameter
26 in

Result

Road speed145.2mph

Assumptions and limits

  • No tire slip or growth; real loaded radius is slightly smaller than the unloaded diameter.

Related terms

Frequently asked

How do I calculate speed from rpm and gear ratio?

mph = rpm × tire diameter (in) ÷ (gear ratio × final drive × 336.13). At 3,000 rpm in a 0.8 overdrive with a 3.73 final drive and 26 in tires, that is about 78 mph.

How does final drive ratio change acceleration?

A numerically higher final drive multiplies torque at the wheels and raises rpm at any speed, giving stronger acceleration but higher cruise rpm and lower top speed in each gear.

Answers draw on the sources below.

Sources

  1. Automotive Handbook · Robert Bosch GmbH

Spot an error? Tell us.