IHI · VF family · Gasoline

IHI VF39 (Subaru STI)

VF39STI VF392004 STI turboIHI VF39 RHF55Subaru STI EJ257Internal wastegateSingle-scroll (owner-reported)Cracks at wastegate portFitted to a 300 bhp-rated car

The IHI VF39 is the turbo owners identify on the early US-market Subaru Impreza WRX STI with the 2.5 L EJ257, rated by Subaru at 300 hp (224 kW). Owners report it as single-scroll, with a turbine housing that can crack at the wastegate port at raised boost, causing boost creep. The later VF43 is described as the same idea with a revised wastegate.Low123

CompressorjournalwastegateTurbine
Illustration of the layout, not the part.

Cars and engines

2 factory applications

VehicleEngineYearsPart number
Subaru Impreza WRX STI (GD, USDM)EJ257From 2004 (the 2007 car is reported to use the VF43)—Owners report the VF39 as the USDM STI turbo; Wikipedia lists the 2004-2007 US STI at 300 bhp (224 kW) at 6,000 rpm without naming the turbo.Low13
Subaru Impreza WRX STI (2.5 L, other markets)EJ257Mid-2000s—Owners report later 2.5 L STIs in other markets also used it.Low1

Specifications

Wheel sizes vary by source and revision; differences are flagged.

Hardware (owner-reported)

SpecValueSource
Turbine housingSingle-scrollThe original post in an owner thread said twin-scroll; a reply corrected it to single-scroll.Sources differLow1
BearingJournal (thrust) bearing or roller bearingOwner sources disagree; one thread lists it as roller bearing, another describes it as a thrust-bearing unit.Sources differLow12
WastegateInternal; port prone to crackingLow12
Wheel sizesNot found in a reliable sourceNo IHI or Subaru figure found.UnverifiedLow1
Factory boostNot found in a reliable sourceCheck the STI service manual.UnverifiedLow3

What the VF39 is

The VF39 turbo is one of IHI's VF-series units for Subaru.

Owners identify it as the turbo on the early US-market WRX STI with the 2.5 L EJ257.Low1

Subaru rated the 2004-2007 US STI at 300 bhp (224 kW) at 6,000 rpm, according to Wikipedia's EJ engine page.Medium3

Wastegate cracks and boost creep

Owners report the VF39 turbine housing cracking near the wastegate opening at higher boost.

A cracked port lets the flapper bypass less gas than intended, so boost climbs past target at high rpm.Low12

That is why used VF39s are cheap. Inspect the wastegate port with the flapper open before buying one.Low2

VF39 vs VF43

Owners describe the VF43 as the VF39's successor on the 2007 STI.

One says it has a larger wastegate to reduce boost creep; another says the change is a stiffer wastegate.Low21

Neither claim comes with IHI data. Treat the two as close relatives and check the wastegate port and actuator on the unit you have.Low2

Oil supply

On 2005-2008 Subarus a retailer blames most turbo failures on a clogged mesh screen in the oil-feed banjo bolt.

Replace the bolt per Subaru bulletin 02-103-07 whenever a turbo goes on.Low4

Common problems

What fails, why, and the usual fix.

  1. 1Boost creep at high rpm

    Usual cause

    Wastegate port cracking or a flapper that cannot bypass enough exhaust.

    Fix

    Inspect the port; replace the housing or move to a VF43 or later unit with a revised wastegate.Low12

  2. 2Turbo failure from oil starvation

    Usual cause

    Clogged banjo-bolt filter screen in the oil feed.

    Fix

    Fit a new banjo bolt per Subaru bulletin 02-103-07.Low4

Upgrade paths

The routes owners take from the factory unit.

OEM swap

VF39 → VF43 or VF48

Owners move to later STI turbos with revised wastegates. Check oil, coolant and up-pipe fitment for your year and recalibrate.Low21

Big single

Larger single

Bigger power means a larger frame on a new up-pipe or manifold. Compare maps such as the G25-660 against the EJ257's airflow target.Low1

Garrett G25-660 compressor map →

Frequently asked

What car came with the VF39?

Owners identify the VF39 as the turbo on the early US-market Subaru Impreza WRX STI with the 2.5 L EJ257, and report it on later 2.5 L STIs in other markets. Subaru rated the 2004-2007 US STI at 300 bhp (224 kW). Check the tag on your turbo to be sure.Low13

What is the difference between VF39 and VF43?

Owners describe the VF43 as the 2007 STI's update of the VF39 with a revised wastegate, either larger or stiffer depending on the source, aimed at reducing boost creep. IHI has not published the difference in a source found here.Low21

Why does the VF39 crack at the wastegate?

Owners report the turbine housing cracks near the wastegate opening, especially at raised boost, where heat cycling is hardest. A cracked port can cause boost creep. Inspect it with the flapper open before buying a used unit.Low12

Is the VF39 ball bearing?

Sources disagree. One owner thread lists it as a roller-bearing unit and another describes it as a thrust-bearing (journal) turbo. Check the center section or ask a rebuilder who has the part open.Low12

Related

Sources

Numbered as cited above. Hover or tap a citation chip to preview it.

  1. VF series turbo info · I-Club (Subaru Impreza forum) · community · retrieved 2026-11-04
  2. IHI (forum thread on VF-series turbos) · SeatCupra.net · community · retrieved 2026-11-04
  3. Subaru EJ engine · Wikipedia · reference · retrieved 2026-11-04
  4. 2002-2008 Subaru turbocharger failure · BuyAutoParts blog · community · retrieved 2026-11-04

Brand and model names identify the turbo and the vehicles it was fitted to; GAINS is not affiliated with their makers.