GM / Continental · Frequency / pulse width
GM / Continental 13577429 flex fuel sensor
GM 13577429 (Continental SE1004) is the ethanol content sensor GM fitted to E85-capable vehicles, and the usual choice for aftermarket flex fuel. Output frequency minus 50 equals ethanol percent (50-150 Hz), pulse width gives fuel temperature, and the pins are A 12 V, B ground, C signal. GM covered road-salt failures under special coverage 14289.Medium52
Key specifications
Measures: Ethanol content (0-100 %) and fuel temperature. Output: Frequency / pulse width.
Pinout and connector
Unverified, confirm before wiring
- Supply
- Ground / return
- Signal
- Shield
- Not used / not listed
| Pin | Function (as published) | Typical ECU input | Wire note |
|---|---|---|---|
| A | Supply (12 V) | Switched +12 V (fused) | — |
| B | Ground | Sensor ground | Return to sensor ground, not chassis |
| C | Signal output | Frequency/digital input (pull-up) | — |
Pin functions as published.Medium5 The ECU-input and wire columns are our general guidance, not the maker's.
Connector: GT150-series 3-way (per distributor)Medium5 Connector library
Transfer function and calibration data
E% = f − 50
Show the 5 data points
| Frequency (Hz) | Ethanol (%) |
|---|---|
| 50 | 0 |
| 75 | 25 |
| 100 | 50 |
| 125 | 75 |
| 150 | 100 |
T = 41.5 × PW − 81.25
Distributor-stated formula; the calculator uses the 1 ms = −40 °C, 5 ms = 125 °C convention, which differs by about 1 °C at the top.
Show the 5 data points
| Pulse width (ms) | Fuel temperature (°C) |
|---|---|
| 1 | -39.75 |
| 2 | 1.75 |
| 3 | 43.25 |
| 4 | 84.75 |
| 5 | 126.3 |
How it's calibrated
ECU-neutral: enter these values in whichever ECU you use. Nominal values without the maker's tolerance band.
Transfer function
Worked conversion
- At 85 Hz the sensor reports 35 % ethanol.5Calculated from the maker's data
Ethanol content vs frequency (5 rows)
| Frequency (Hz) | Ethanol (%) |
|---|---|
| 50 | 0 |
| 75 | 25 |
| 100 | 50 |
| 125 | 75 |
| 150 | 100 |
Fuel temperature vs pulse width (5 rows)
| Pulse width (ms) | Fuel temperature (°C) |
|---|---|
| 1 | -39.75 |
| 2 | 1.75 |
| 3 | 43.25 |
| 4 | 84.75 |
| 5 | 126.25 |
Native support across ECUs
| ECU platform | Status | How to set it up | Source |
|---|---|---|---|
| GAINS ECU2Concept | To be confirmed | The ECU2 AVIs list flex as a use; frequency decoding on the PDM2 flex input is still an open item. Concept hardware. | Medium34 |
| Haltech (Elite / Nexus) | Configurable (generic input) | Synchronous pulsed input; Haltech lists a flex fuel function with a direct sensor input. | 67 |
| Link (G4X) | Configurable (generic input) | One digital input plus 12 V and ground, per Link's ethanol sensor page. | 8 |
| MoTeC (M1) | Unverified | The M150 page lists digital inputs but does not mention flex fuel. | No public source |
| ECUMaster (EMU Black) | Configurable (generic input) | Dedicated flex fuel input. | 9 |
| AEM (Infinity) | Configurable (generic input) | Digital Hz input; AEM says these can be used for flex fuel. | Medium10 |
| MaxxECU | Configurable (generic input) | Flex fuel input; MaxxECU states direct support for the ethanol sensor it sells (no OE part number given). | Medium11 |
| Holley (Terminator X / EFI) | Unverified | No public Holley spec page we read ties a frequency input to a flex fuel sensor. | No public source |
Third-party rows come only from each vendor's public product pages, sensor lists and spec sheets, retrieved on the dates listed in Sources; we do not use ECU software, help files, base maps or calibration files, and reproduce no vendor calibration values. "Preset listed" means the vendor publicly names this sensor; "Configurable" means a matching generic input is listed. Check the vendor's current documentation before buying.
Trademarks belong to their owners. Names are used only to identify compatible products; no endorsement is implied.
CAD and drawings
The maker does not publish a data sheet, drawing or CAD model for this part that we could find.
We link to the maker's own downloads and do not rehost their CAD or data sheets: the maker's terms do not grant redistribution. Registration may be needed on the maker's site.
Wiring and installation
All fuel must pass through the sensor before the rail. Use fuel-rated quick-connect fittings and leak-check before starting.Medium51
Failure modes and checks
Likely cause Electrical failure from road salt and contaminants
Check GM's remedy under special coverage 14289 was replacing the sensor; inspect the connector for corrosion.2
Likely cause Input not measuring frequency or no pull-up
Check Scope the signal: expect a square wave near 135 Hz on E85.Medium5
Frequently asked
What is the pinout of the GM flex fuel sensor?
Pin A 12 V supply, pin B ground, pin C signal output, per the GM parts distributor's data for 13577429.Medium5
What does 135 Hz mean on a flex fuel sensor?
85 % ethanol: on the 13577429, ethanol percent equals frequency minus 50.Medium5
Why did GM replace flex fuel sensors under special coverage?
GM bulletin 14289 says the sensor could fail electrically from road salt and other contaminants, lighting the service lamp and disabling remote start; dealers replaced it with 13577429.2
Related
Use it with GAINS
GM / Continental 13577429 flex fuel sensor on GAINS hardware
GAINS hardware is pre-release concept design; pin numbers can change before release and none of it has been tested on a vehicle yet.34
Concept Pre-release hardware. Pin assignments come from the current design documents and may change.
Sources
11 sources
- Automotive Handbook, 10th edition (2018) · Robert Bosch GmbH / Wiley · book · retrieved 2026-10-27
- Service Bulletin 14289: Special Coverage Adjustment, Flex Fuel Sensor Malfunction (Aug 2014) · General Motors (via NHTSA) · oem · retrieved 2026-10-27
- internal GAINS internal: ECU2 concept and pin map v0.3 (hardware/mini-ecu/CONCEPT.md §3)
- internal GAINS internal: PDM2 input and output specification (hardware/mini-pdm/SPEC.md)
- Ethanol content sensor 13577429 product data (SE1004) · Racetronix (GM parts distributor) · vendor-doc · retrieved 2026-10-27
- Nexus R3 VCU (HT-193000) product page · Haltech · vendor-doc · retrieved 2026-10-27
- Elite 2500 ECU (HT-151300) product page · Haltech · vendor-doc · retrieved 2026-10-27
- Ethanol Content Sensor product page · Link Engine Management · vendor-doc · retrieved 2026-10-27
- EMU Black product page · ECUMaster · vendor-doc · retrieved 2026-10-27
- 30-3519 Infinity plug-and-play harness instructions · AEM Electronics · vendor-doc · retrieved 2026-10-27
- Ethanol sensor store page · MaxxECU · vendor-doc · retrieved 2026-10-27

