Cars and engines
2 factory applications
| Vehicle | Engine | Years | Part number |
|---|---|---|---|
| Ford F-250 / F-350 (OBS), Econoline | 7.3 Power Stroke (Navistar T444E) | 1994.5-1997 | —Non-wastegated turbo with a 1.15 A/R turbine housing. Rated 210 hp at launch, raised to 235 hp (175 kW) for 1998.Medium12 |
| Ford F-250 / F-350 Super Duty, Excursion, E-350 / E-450, F-650 / F-750 | 7.3 Power Stroke (Navistar T444E) | 1999-2003 | —0.84 A/R turbine housing; wastegate added partway through the 1999 model year. Late ratings up to 250 hp (186 kW) and 505 lb-ft (685 N-m) automatic, 275 hp (205 kW) and 525 lb-ft (712 N-m) manual.Medium13 |
Specifications
Wheel sizes vary by source and revision; differences are flagged.
Compressor
Turbine
Construction and control
| Spec | Value | Source |
|---|---|---|
| Wastegate | None on 1994.5-1997; added mid-1999 model year | Medium1 |
| Bearing (stock) | Journal bearing with thrust bearingInferred from Garrett's GTP38R text, which says its ball-bearing cartridge removes the thrust bearing. No direct statement on the OE unit. | UnverifiedLow3 |
| Factory boost | Not published by Ford in sources foundGarrett gives 40 psi (2.8 bar) as the maximum recommended boost for its GTP38R upgrade, not for the stock turbo. | UnverifiedLow3 |
TP38 vs GTP38
Owners call the early 1994.5-1997 turbo the TP38 and the 1999-2003 turbo the GTP38.
The practical difference is the turbine housing: 1.15 A/R and no wastegate early, then 0.84 A/R with a wastegate added during 1999.Medium1
The smaller 0.84 A/R housing spools faster for heavier Super Duty trucks, and the wastegate limits boost at high load. Swapping housings between years changes spool and drive pressure, so match the housing to the calibration.Low1
How to identify your 7.3 turbo
Check the model year first, then look for the wastegate actuator on the turbine housing.
A wastegated unit is a mid-1999 or later GTP38. The Garrett tag on the compressor housing gives the exact part number.Medium13
What the stock turbo supports
Ford's last ratings were 250 hp (186 kW) automatic and 275 hp (205 kW) manual.
Owners who add injectors and tuning often outgrow the 80 mm wheel, which shows as rising exhaust gas temperature.Medium13
Garrett states its 88 mm GTP38R flows 33% more than the stock 80 mm wheel and can lower exhaust temperature by up to 200 °F (111 °C). Those are Garrett's figures.3
Safety
Diesel exhaust and turbo housings stay hot long after shutdown.
Work on a cold engine, support the truck on stands, and drain coolant and oil only into proper containers.Low3
Common problems
What fails, why, and the usual fix.
1High exhaust gas temperature with modified fueling
Usual causeThe stock 80 mm compressor runs out of flow with larger injectors and tuning.
FixMonitor EGT with a pyrometer and match fueling to airflow. A larger compressor such as the 88 mm GTP38R reduces EGT, per Garrett.Medium3
2Thrust bearing failure at raised boost
Usual causeGarrett cites thrust bearing failures at elevated boost as a reason for its ball-bearing cartridge.
FixKeep boost within what the stock unit tolerates, or replace with a ball-bearing turbo.Medium3
Upgrade paths
The routes owners take from the factory unit.
Garrett PowerMax GTP38R (739619-5004S)
Ball-bearing replacement with a 66/88 mm compressor, 1.00 A/R compressor and turbine housings and a 76/68 mm turbine. Garrett quotes 590 hp and a 40 psi maximum recommended boost. The page lists conflicting fitment years (1995.5-2003 and 1999.5-2003), so confirm with Garrett for your truck.3
Compound turbos
High-power 7.3 builds add a large low-pressure turbo feeding the stock-position turbo. This needs custom piping, fueling and calibration and is outside the scope of a factory-style swap.Low3
Frequently asked
What turbo is on a 7.3 Powerstroke?
A single Garrett turbo. Owners call the 1994.5-1997 unit the TP38 and the 1999-2003 unit the GTP38. Garrett states the stock compressor wheel is 80 mm, and Wikipedia lists a 1.15 A/R early turbine housing and 0.84 A/R from 1999.Medium13
When did the 7.3 get a wastegate?
Partway through the 1999 model year, according to Wikipedia. The 1994.5-1997 turbo had no wastegate and a 1.15 A/R housing; the 1999 change brought a 0.84 A/R housing and then a wastegate.Medium1
What is the GTP38R?
The GTP38R is Garrett's ball-bearing upgrade for the 7.3 Power Stroke. It has an 88 mm compressor wheel, which Garrett says flows 33% more than the stock 80 mm wheel, and 1.00 A/R housings. Garrett quotes 590 hp and 40 psi maximum boost.3
How much boost can a stock 7.3 turbo make?
Ford did not publish a boost figure in the sources found. The stock turbo's limit depends on the housing, wastegate and fueling. Garrett cites thrust bearing failures at elevated boost as the reason for its ball-bearing upgrade.Low31
Can I put a 1999-2003 turbo on a 1994-1997 7.3?
It changes the turbine housing from 1.15 to 0.84 A/R, which spools sooner but raises drive pressure. Mounting and plumbing details differ by year, so check each part number and plan for a matching calibration.Low1
Related
Sources
Numbered as cited above. Hover or tap a citation chip to preview it.
- Ford Power Stroke engine (7.3 L turbocharger details) · Wikipedia · reference · retrieved 2026-11-04
- Navistar T444E engine · Wikipedia · reference · retrieved 2026-11-04
- PowerMax 7.3L Ford Power Stroke GTP38R (739619-5004S) · Garrett Motion · vendor-doc · retrieved 2026-11-04
Brand and model names identify the turbo and the vehicles it was fitted to; GAINS is not affiliated with their makers.

