Cars and engines
5 factory applications
| Vehicle | Engine | Years | Part number |
|---|---|---|---|
| Audi A4 / A6 (B5, C5), VW Passat B5 (longitudinal 1.8T)Europe, North America | 1.8T 20v AEB, AJL | 1996-2001 | 5303-970-0005 / 5303-988-0005 (K03-005)Turbo Ideal lists both the 110 kW (150 hp) and the 132 kW (180 hp) engines for this number.Medium1 |
| Audi A4 / A6, VW Passat, SEAT Exeo (longitudinal 1.8T)Europe and other markets | 1.8T 20v APU, ARK, BFB, CFMA | c. 2000-2013 | 5303-970-0029 / 5303-988-0029 (K03-029), OE 058145703J reported110 kW (150 hp) and 120 kW (163 hp) versions. Water-cooled bearing housing.Medium29 |
| VW Golf IV / Bora / Jetta / New Beetle, Audi A3 8L / TT 8N, SEAT León / Toledo, Škoda Octavia (transverse 1.8T 150 PS) | 1.8T 20v AGU, ARZ, AUM and related 110 kW codes | 1997-2006 | 5303-988-0035 and 06A145704 family listed by sellersSeller listings tie 06A145704-series numbers to the transverse K03. Turbo Ideal ties 5303-970-0035 to the SEAT Ibiza Cupra (AQX, AYP, 115 kW). Confirm by the tag on the compressor housing.Low1035 |
| VW Golf IV GTI / Jetta / New Beetle Turbo S, Audi A3 / TT, Škoda Octavia RS, SEAT León (transverse 1.8T 180 PS)Europe, North America | 1.8T 20v AUQ, AWP, APP, ARY and related 132 kW codes | 1999-2006 | 5303-988-0052 / 5303-970-0052 (K03-052), 06A145713D listed; K03-053 also usedUsually called the K03s. Sellers list a 45 mm compressor inlet for K03-052 and K03-053.Low115 |
| VW Golf V GTI, Audi A3 8P 2.0 TFSI, SEAT León, Škoda Octavia RS | 2.0 TFSI EA113 (e.g. BWA, AXX) | 2004-2009 | —Wikipedia gives a BorgWarner K03 at 0.9 bar (13.1 psi) for the standard 2.0 TFSI and reserves the K04 for 169 kW and up. This K03 is a different casting from the 1.8T units.Medium5 |
Specifications
Wheel sizes vary by source and revision; differences are flagged.
Compressor
| Spec | Value | Source |
|---|---|---|
| Compressor wheel, K03-005 | 35.9 mm (1.41 in) inducer / 50 mm (1.97 in) exducer, 6+6 blades, 4.7 mm tip height | Medium1 |
| Compressor wheel, K03-029 | 35.9 mm (1.41 in) inducer / 50 mm (1.97 in) exducer, 6+6 blades | Medium2 |
| Compressor wheel, K03s (transverse 180 PS) | Reported near 36/50 mm; one forum list gives 38/51 mm for later K03sNo maker or rebuilder sheet found. Owner-measured forum figures disagree, so treat as approximate until a wheel is measured. | Sources differLow13 |
| Compressor inlet, K03-052 / K03-053 | 45 mm (1.77 in) as listed by a seller | Low11 |
Turbine
| Spec | Value | Source |
|---|---|---|
| Turbine wheel, K03-005 | 45 mm (1.77 in) inducer / 37.8 mm (1.49 in) exducer, 11 blades, 7.7 mm tip height | Medium1 |
| Turbine wheel, K03-029 | 45 mm (1.77 in) inducer / 40.3 mm (1.59 in) exducer, 11 blades | Medium2 |
| Turbine housing A/R | Not publishedNo maker or OE source found for the K03 turbine A/R. Seller model codes such as 2075EXD encode housing trims but are not decoded publicly. | UnverifiedLow12 |
Construction and control
| Spec | Value | Source |
|---|---|---|
| Bearing | Journal (plain) bearingStandard for the K0 family but not stated on the catalog pages used here. | UnverifiedLow8 |
| Wastegate | Internal wastegate with pneumatic actuator | Medium98 |
| Cooling | Oil and water cooled on K03-029 and most transverse units; K03-005 listed as not water cooled | Medium128 |
| Flanges | 3-bolt turbine inlet and 3-bolt outlet (longitudinal K03-029, seller description) | Low9 |
| Factory boost (2.0 TFSI K03) | 0.9 bar (13.1 psi) | Medium5 |
| Factory boost (1.8T K03 / K03s) | Not published by the OEM in sources foundVaries by engine code and ECU calibration. No OEM figure found. | UnverifiedLow5 |
Who makes the K03: KKK, 3K-Warner, BorgWarner
The K03 turbo is a KKK design.
KKK stands for Kühnle, Kopp & Kausch, the German turbocharger maker in Frankenthal. BorgWarner bought the business in 1997-1998 and ran it as 3K-Warner Turbosystems before folding it into BorgWarner Turbo Systems.Medium67
That is why the same turbo appears as "KKK K03", "3K K03" and "BorgWarner K03". Garrett never made it. Genuine units carry BorgWarner part numbers that start 5303 for K03 and 5304 for K04.Medium81
K03 vs K03s
The plain K03 sat on 150 PS (110 kW) 1.8T engines.
The K03s, also sold as K03-052 and K03-053 on transverse cars, sat on most 180 PS (132 kW) engines such as AWP and AUQ.Medium511
The catalog data for K03-005 and K03-029 shows the same 35.9/50 mm compressor with different turbine exducers, 37.8 mm versus 40.3 mm. Owners commonly describe the K03s the same way: similar cold side, freer-flowing turbine.Medium1213
How to identify a K03
Read the tag or stamping on the compressor housing.
A number like 5303-988-0029 decodes as K03, variant 029. The VW part number (06A145704 or 058145703 series) cross-references through parts catalogs.Medium29
Longitudinal A4 and Passat engines use different turbos from transverse Golf, A3 and TT engines. The two are not interchangeable without changing manifold, oil and coolant lines and intake pipes, so check the engine layout first.Low13
What a K03 supports
The K03 is sized for fast spool on a 1.8 L engine, not top-end flow.
Sellers and owners report around 200-220 PS on a remapped K03-029, and that figure is an owner claim, not a rating.Low9
At higher boost the small 50 mm compressor runs past its efficient range and intake temperatures rise. Owners who want more usually step to the K04 or a hybrid rather than raising K03 boost further.Low1315
Common problems
What fails, why, and the usual fix.
1Oil coking, sludge and turbo bearing failure
Usual causeShort oil intervals on conventional oil, and heat soak after shutdown, coked oil in the feed line and bearing housing. VW and Audi extended sludge-related warranty coverage on 1.8T A4 and Passat models in 2004.
FixUse the VW-approved synthetic oil on a short interval, replace the oil feed line and banjo screens when fitting a turbo, and let the engine idle briefly after hard driving.Medium14
2Shaft play and smoke
Usual causeJournal bearing wear from oil starvation or contamination, often a result of the coking above.
FixCheck axial and radial play with the intake pipe off. Replace or rebuild the turbo and clear the cause first, or the new unit will fail the same way.Low14
Upgrade paths
The routes owners take from the factory unit.
K04-001 (transverse) or K04-015 (longitudinal)
The K04 adds a larger compressor and turbine while keeping a factory-style footprint. A K04-001 suits transverse cars and a K04-015 suits longitudinal ones. Expect new intake pipes, lines and a matching calibration; one seller notes the K04-001 inlet is larger than the K03s.Low151113
K04-022 / K04-023 (225 PS engines)
The 225 PS S3 and TT turbo has a 42/56 mm compressor, much larger than the K03. It is not a direct fit in place of a K03 because the manifold and plumbing differ.Medium413
Hybrid K03 / K04
Rebuilders fit larger billet compressor wheels and machined housings inside the stock K03 or K04 shell. This keeps factory plumbing. Each hybrid's rating is the seller's own claim.Low1516
GT28-class big turbo kit (compare a GTX2867R map)
Kits with a GT28-frame turbo, a new manifold and a downpipe replace the factory turbo on transverse cars. They need fueling, intercooling and a full calibration.Low17
Garrett GTX2867R Gen II compressor map →Frequently asked
Is the K03 a Garrett turbo?
No. The K03 is a KKK design, and KKK became 3K-Warner and then BorgWarner Turbo Systems around 1997-1998. Genuine units carry BorgWarner part numbers starting 5303. Some sellers wrongly label it Garrett because Garrett also made small OE turbos for VW in other eras.Medium68
What is the difference between a K03 and a K03s?
The K03s is the version fitted to most 180 PS (132 kW) 1.8T engines. Catalog data shows K03 variants sharing a 35.9/50 mm compressor while turbine exducers differ, 37.8 mm on K03-005 and 40.3 mm on K03-029. The K03s is generally described as the freer-flowing version.Medium125
How much power can a K03 make?
No maker rating exists. The engines it came on were rated 150-180 PS (110-132 kW). Sellers and owners report around 200-220 PS with a remap on a healthy K03, but that depends on fuel, intercooling and calibration, and is not a figure you can count on.Low59
Is a K04 a bolt-on upgrade for a K03?
Mostly, with extra parts. The K04-001 (transverse) and K04-015 (longitudinal) keep a factory-style mounting but usually need different intake pipes, oil and coolant lines and a matching calibration. The 225 PS K04-022/023 is not a direct fit in place of a K03.Low1513
Why do K03 turbos fail?
Most fail from oil problems. The 1.8T is known for oil sludge and coking when oil changes are stretched or the wrong oil is used, and VW and Audi extended sludge warranty coverage in 2004. Coked feed lines starve the journal bearing, which causes shaft play and smoke.Medium14
How do I tell which K03 I have?
Read the stamped tag on the compressor housing. BorgWarner numbers like 5303-988-0029 give the family (5303 = K03) and the variant (029). Cross-reference the VW number (06A145704 or 058145703 series) for the engine code, and check whether the engine is longitudinal or transverse.Medium29
Related
Sources
Numbered as cited above. Hover or tap a citation chip to preview it.
17 sources
- Turbo OE 5303-970-0005 (KKK K03) · Turbo Ideal catalog · vendor-doc · retrieved 2026-11-04
- Turbo OE 5303-970-0029 (KKK K03) · Turbo Ideal catalog · vendor-doc · retrieved 2026-11-04
- Turbo OE 5303-970-0035 (KKK K03) · Turbo Ideal catalog · vendor-doc · retrieved 2026-11-04
- Turbo OE 5304-970-0022 (KKK K04) · Turbo Ideal catalog · vendor-doc · retrieved 2026-11-04
- List of Volkswagen Group petrol engines · Wikipedia · reference · retrieved 2026-11-04
- BorgWarner · Wikipedia · reference · retrieved 2026-11-04
- BorgWarner to acquire interest in Kühnle, Kopp & Kausch (press report, September 1997) · The Auto Channel · press · retrieved 2026-11-04
- BorgWarner K03 turbocharger 53039880029 (OE replacement listing) · FinditParts · vendor-doc · retrieved 2026-11-04
- K03-029 turbo listing (3-bolt in/out, oil and water cooled, internal wastegate) · FINN.no · community · retrieved 2026-11-04
- BorgWarner K03 Audi A3 TT VW Jetta Beetle SEAT León 1.8L 53039700035 · TurboTurbos · vendor-doc · retrieved 2026-11-04
- K03-052 turbocharger for VW Golf IV / Polo GTI 1.8T 132 kW 53039880052 · Maxpeedingrods · vendor-doc · retrieved 2026-11-04
- 06A 145 704S K03-2075EXD turbocharger replacement · Lead Turbo · vendor-doc · retrieved 2026-11-04
- K04 compatibility (forum thread with owner-measured wheel sizes) · Audizine · community · retrieved 2026-11-04
- Audi to extend warranty on certain models due to oil sludge problems · AudiWorld · press · retrieved 2026-11-04
- 1.8T 20V upgrade turbocharger K04-001 BorgWarner · Bar-Tek · vendor-doc · retrieved 2026-11-04
- BorgWarner upgrade turbo K04-023 Audi S3 8L / TT 8N 1.8T · JT Products · vendor-doc · retrieved 2026-11-04
- 1.8T Garrett GT28 turbo kit · Bar-Tek · vendor-doc · retrieved 2026-11-04
Brand and model names identify the turbo and the vehicles it was fitted to; GAINS is not affiliated with their makers.

