GAINS PDM2 · Gearboxes · MT82 and TR3650

Getrag / Tremec (Ford) · Manual

MT82 and TR3650 reverse lockout and switch control for Ford Coyote 5.0 and 4.6 3V swaps

The Coyote-era Mustang six-speeds. No solenoids; PDM2 reads the switches and speed for ECU2's interlocks.

ControlInterlocks and switches
StatusPlanned · v1 target
Gears6
Also calledGetrag MT82, TR3650, Tremec 3650
Common swaps

Where it ends up.

2005 on Mustang GT (TR3650) and 2011 to 2017 Mustang GT (MT82).

Ford Coyote 5.0 and 4.6 3VSN95 and Fox Mustangs, F-100 and restomods

Swap guides that use the MT82 and TR3650:

Interlocks and switches

What PDM2 runs.

No TCU needed. PDM2 runs the reverse lockout, skip-shift and reverse-light circuits and reads the speed sensor.

  • Reverse, neutral and clutch switches
  • Vehicle speed input

With ECU2

ECU2 reads the clutch and neutral switches for start interlock, launch and flat-shift.

FAQ
Can the GAINS PDM2 control a MT82 and TR3650?

It is planned (v1 target). No TCU needed. PDM2 runs the reverse lockout, skip-shift and reverse-light circuits and reads the speed sensor. Nothing is supported until bench and vehicle logs and an engineering review are done.

Which swaps use the MT82 and TR3650?

Ford Coyote 5.0 and 4.6 3V: SN95 and Fox Mustangs, F-100 and restomods.

Does it need a separate transmission controller?

No separate controller box is planned: PDM2 handles the gearbox and ECU2 runs the engine. ECU2 reads the clutch and neutral switches for start interlock, launch and flat-shift.

Related gearboxes

Planned capability, not a supported product. Shift control acts on engine output and is released only after bench and vehicle logs and a qualified engineering review. Getrag / Tremec (Ford) and other names identify compatible equipment only; GAINS is not affiliated with their makers.

Join the waitlist