With ECU2
ECU2 supplies road speed for the reverse-lockout rule and can run flat-shift and launch strategies from the clutch and gear inputs.
GAINS PDM2 · Gearboxes · T56 and TR6060
Tremec · ManualThe go-to six-speed manual for LS and Coyote swaps. PDM2 runs the reverse lockout and skip-shift solenoids that otherwise need a separate module or a hack.
Camaro, Firebird, Corvette, GTO, Viper and later TR6060 cars (Camaro SS, GT500, CTS-V).
| GM LS / LT | BMW E30 / E36 / E46, Nissan 240SX / 300ZX / 350Z, FD RX-7, Miata, Subaru BRZ, Fox Mustang |
|---|---|
| Ford Coyote and Mod-motor | SN95 Mustang and Fox builds |
Swap guides that use the T56 and TR6060:
No TCU needed. PDM2 runs the reverse lockout, skip-shift and reverse-light circuits and reads the speed sensor.
ECU2 supplies road speed for the reverse-lockout rule and can run flat-shift and launch strategies from the clutch and gear inputs.
It is planned (v1 target). No TCU needed. PDM2 runs the reverse lockout, skip-shift and reverse-light circuits and reads the speed sensor. Nothing is supported until bench and vehicle logs and an engineering review are done.
GM LS / LT: BMW E30 / E36 / E46, Nissan 240SX / 300ZX / 350Z, FD RX-7, Miata, Subaru BRZ, Fox Mustang. Ford Coyote and Mod-motor: SN95 Mustang and Fox builds.
No separate controller box is planned: PDM2 handles the gearbox and ECU2 runs the engine. ECU2 supplies road speed for the reverse-lockout rule and can run flat-shift and launch strategies from the clutch and gear inputs.
Planned capability, not a supported product. Shift control acts on engine output and is released only after bench and vehicle logs and a qualified engineering review. Tremec and other names identify compatible equipment only; GAINS is not affiliated with their makers.
Join the waitlist