With ECU2
ECU2 uses the switches and speed for start interlock, launch and flat-shift.
GAINS PDM2 · Gearboxes · R154 and W58
Toyota / Aisin · ManualThe classic manuals behind a swapped JZ. PDM2 reads the switches and speed signal for ECU2.
Toyota Supra Mk3, Soarer, Cressida and Chaser (R154 behind the turbo JZ and 7M).
| Toyota 1JZ / 2JZ (and the Nissan CD009 in some builds) | Nissan 240SX, BMW E46, Lexus IS300, Supra Mk3 |
|---|
Swap guides that use the R154 and W58:
No TCU needed. PDM2 runs the reverse lockout, skip-shift and reverse-light circuits and reads the speed sensor.
ECU2 uses the switches and speed for start interlock, launch and flat-shift.
It is planned (v1 target). No TCU needed. PDM2 runs the reverse lockout, skip-shift and reverse-light circuits and reads the speed sensor. Nothing is supported until bench and vehicle logs and an engineering review are done.
Toyota 1JZ / 2JZ (and the Nissan CD009 in some builds): Nissan 240SX, BMW E46, Lexus IS300, Supra Mk3.
No separate controller box is planned: PDM2 handles the gearbox and ECU2 runs the engine. ECU2 uses the switches and speed for start interlock, launch and flat-shift.
Planned capability, not a supported product. Shift control acts on engine output and is released only after bench and vehicle logs and a qualified engineering review. Toyota / Aisin and other names identify compatible equipment only; GAINS is not affiliated with their makers.
Join the waitlist