GAINS PDM2 · Gearboxes · A340E

Toyota / Aisin · Automatic

A340E standalone controller for Toyota 1JZ and 2JZ swaps

The usual automatic behind a swapped JZ. Simple on/off solenoids, planned for direct control.

ControlDirect control
StatusPlanned · v1 target
Gears4
Also calledA340, A341E, A343F
Common swaps

Where it ends up.

Toyota Supra, Lexus IS300 / GS300 / SC300, Cressida and trucks with JZ and UZ engines.

Toyota 1JZ and 2JZNissan 240SX, BMW E30 / E36 / E46, Supra Mk3, IS300

Swap guides that use the A340E:

Direct control

What PDM2 runs.

PDM2 drives the shift, pressure and converter solenoids itself and reads the speed sensors, range switch and fluid temperature.

  • Shift solenoids S1 and S2 (on/off)
  • Lock-up solenoid (on/off or PWM)
  • Vehicle speed input
  • Range switch

With ECU2

ECU2 supplies throttle and load for the shift schedule. Upshift torque cut and downshift blip come from ECU2 over the GAINS CAN link, so shifts are timed to the engine, not guessed.

FAQ
Can the GAINS PDM2 control a A340E?

It is planned (v1 target). PDM2 drives the shift, pressure and converter solenoids itself and reads the speed sensors, range switch and fluid temperature. Nothing is supported until bench and vehicle logs and an engineering review are done.

Which swaps use the A340E?

Toyota 1JZ and 2JZ: Nissan 240SX, BMW E30 / E36 / E46, Supra Mk3, IS300.

Does it need a separate transmission controller?

No separate controller box is planned: PDM2 handles the gearbox and ECU2 runs the engine. ECU2 supplies throttle and load for the shift schedule. Upshift torque cut and downshift blip come from ECU2 over the GAINS CAN link, so shifts are timed to the engine, not guessed.

Related gearboxes

Planned capability, not a supported product. Shift control acts on engine output and is released only after bench and vehicle logs and a qualified engineering review. Toyota / Aisin and other names identify compatible equipment only; GAINS is not affiliated with their makers.

Join the waitlist