GAINS PDM2 · Gearboxes · 4L60E

GM · Automatic

4L60E standalone controller for GM LS swaps

The most-swapped electronic automatic behind the LS. PDM2 is planned to run it directly: shift solenoids, line pressure and converter lock-up, with ECU2 supplying torque and throttle.

ControlDirect control
StatusPlanned · v1 target
Gears4
Also called4L60-E, 4L65E, 4L70E
Common swaps

Where it ends up.

GM trucks, SUVs and cars from 1993 on, including Gen III and Gen IV LS applications. The 4L65E and 4L70E are the heavier-duty versions with the same control layout.

GM LS (4.8, 5.3, 5.7, 6.0)C10 and square-body trucks, G-body, third-gen Camaro, S10, 240Z, Miata, Volvo 240, BMW E30
GM LTsquare-body C10 and classic Corvette builds

Swap guides that use the 4L60E:

Direct control

What PDM2 runs.

PDM2 drives the shift, pressure and converter solenoids itself and reads the speed sensors, range switch and fluid temperature.

  • Shift A and B solenoids (on/off)
  • 3-2 control solenoid
  • Converter clutch, on/off and PWM
  • Pressure control solenoid, closed-loop current control
  • Output speed sensor (VR)
  • Range switch (4 inputs) and fluid temperature

With ECU2

ECU2 supplies engine speed, load and throttle for the shift schedule and line pressure. Upshift torque cut and downshift blip come from ECU2 over the GAINS CAN link, so shifts are timed to the engine, not guessed.

FAQ
Can the GAINS PDM2 control a 4L60E?

It is planned (v1 target). PDM2 drives the shift, pressure and converter solenoids itself and reads the speed sensors, range switch and fluid temperature. Nothing is supported until bench and vehicle logs and an engineering review are done.

Which swaps use the 4L60E?

GM LS (4.8, 5.3, 5.7, 6.0): C10 and square-body trucks, G-body, third-gen Camaro, S10, 240Z, Miata, Volvo 240, BMW E30. GM LT: square-body C10 and classic Corvette builds.

Does it need a separate transmission controller?

No separate controller box is planned: PDM2 handles the gearbox and ECU2 runs the engine. ECU2 supplies engine speed, load and throttle for the shift schedule and line pressure. Upshift torque cut and downshift blip come from ECU2 over the GAINS CAN link, so shifts are timed to the engine, not guessed.

Related gearboxes

Planned capability, not a supported product. Shift control acts on engine output and is released only after bench and vehicle logs and a qualified engineering review. GM and other names identify compatible equipment only; GAINS is not affiliated with their makers.

Join the waitlist