GAINS PDM2 · Gearboxes · 6L80

GM · Automatic

6L80 standalone controller for GM LS3, L92, L99, LY6 swaps

Six speeds behind a late LS, controlled through its own TEHCM. PDM2 is planned to provide the engine-side CAN messages the factory unit needs.

ControlCAN to the factory TCU
StatusPlanned · v2
Gears6
Also called6L80E, 6L90, 6L90E
Common swaps

Where it ends up.

GM trucks, Camaro, Corvette and CTS-V from 2006 on, with the TCU built into the valve body (TEHCM).

GM LS3, L92, L99, LY6OBS and later trucks, Infiniti G35, Jeep Wrangler, restomods wanting six speeds

Swap guides that use the 6L80:

CAN to the factory TCU

What PDM2 runs.

The factory TCU stays. PDM2 sends the engine-side messages it expects (torque, rpm, pedal, brake) on a private gearbox bus and reads gear and status back.

  • High-speed CAN to the factory TEHCM on a private gearbox bus
  • Brake and tap-shift inputs
  • Solenoid feed with a switched supply

With ECU2

The factory TEHCM keeps its own shift logic. ECU2 provides the engine torque and rpm it expects through PDM2, and acts on its torque-reduction requests during shifts.

Good to know

The TEHCM keeps its own calibration. Re-tuning it is done with the owner's own authorized tool; GAINS never flashes it.

FAQ
Can the GAINS PDM2 control a 6L80?

It is planned (v2). The factory TCU stays. PDM2 sends the engine-side messages it expects (torque, rpm, pedal, brake) on a private gearbox bus and reads gear and status back. Nothing is supported until bench and vehicle logs and an engineering review are done.

Which swaps use the 6L80?

GM LS3, L92, L99, LY6: OBS and later trucks, Infiniti G35, Jeep Wrangler, restomods wanting six speeds.

Does it need a separate transmission controller?

No separate controller box is planned: PDM2 handles the gearbox and ECU2 runs the engine. The factory TEHCM keeps its own shift logic. ECU2 provides the engine torque and rpm it expects through PDM2, and acts on its torque-reduction requests during shifts.

Do you flash or unlock the factory TCU?

No. The factory unit keeps its own calibration. Where an immobilizer unlock is needed, the buyer supplies an unlocked TCU from an authorized tool.

Related gearboxes

Planned capability, not a supported product. Shift control acts on engine output and is released only after bench and vehicle logs and a qualified engineering review. GM and other names identify compatible equipment only; GAINS is not affiliated with their makers.

Join the waitlist