With ECU2
ECU2 supplies torque and throttle for firm, boost-aware shifts. Upshift torque cut and downshift blip come from ECU2 over the GAINS CAN link, so shifts are timed to the engine, not guessed.
GAINS PDM2 · Gearboxes · 4L80E
GM · AutomaticThe heavy-duty GM automatic for big power and towing. PDM2 is planned to run it directly, with both speed sensors, line pressure and converter lock-up.
GM heavy-duty trucks and vans from 1991 on, behind the 6.0 and big-block engines. The 4L85E is the stronger late version.
| GM LS (6.0, turbo 5.3) | boosted and heavy-duty builds: square-body and OBS trucks, G-body, third-gen Camaro, drag cars |
|---|---|
| GM LT and big-block | tow and drag builds where the 4L60E runs out of strength |
Swap guides that use the 4L80E:
PDM2 drives the shift, pressure and converter solenoids itself and reads the speed sensors, range switch and fluid temperature.
ECU2 supplies torque and throttle for firm, boost-aware shifts. Upshift torque cut and downshift blip come from ECU2 over the GAINS CAN link, so shifts are timed to the engine, not guessed.
It is planned (v1 target). PDM2 drives the shift, pressure and converter solenoids itself and reads the speed sensors, range switch and fluid temperature. Nothing is supported until bench and vehicle logs and an engineering review are done.
GM LS (6.0, turbo 5.3): boosted and heavy-duty builds: square-body and OBS trucks, G-body, third-gen Camaro, drag cars. GM LT and big-block: tow and drag builds where the 4L60E runs out of strength.
No separate controller box is planned: PDM2 handles the gearbox and ECU2 runs the engine. ECU2 supplies torque and throttle for firm, boost-aware shifts. Upshift torque cut and downshift blip come from ECU2 over the GAINS CAN link, so shifts are timed to the engine, not guessed.
Planned capability, not a supported product. Shift control acts on engine output and is released only after bench and vehicle logs and a qualified engineering review. GM and other names identify compatible equipment only; GAINS is not affiliated with their makers.
Join the waitlist