With ECU2
ECU2 (with the GAINS DI for LT engines) supplies the engine messages; the factory TCU keeps its shift logic.
GAINS PDM2 · Gearboxes · 8L90 and 10L80
GM · AutomaticEight and ten speeds behind a Gen V LT. Planned for v2, through the factory TCU over CAN.
Gen V LT trucks and Camaro / Corvette applications with an integrated TCU.
| GM LT1, L83, L86, L84, L87 (direct injection: add the GAINS DI) | C3 Corvette, square-body C10 and LT restomods |
|---|
Swap guides that use the 8L90 and 10L80:
The factory TCU stays. PDM2 sends the engine-side messages it expects (torque, rpm, pedal, brake) on a private gearbox bus and reads gear and status back.
ECU2 (with the GAINS DI for LT engines) supplies the engine messages; the factory TCU keeps its shift logic.
It is planned (v2). The factory TCU stays. PDM2 sends the engine-side messages it expects (torque, rpm, pedal, brake) on a private gearbox bus and reads gear and status back. Nothing is supported until bench and vehicle logs and an engineering review are done.
GM LT1, L83, L86, L84, L87 (direct injection: add the GAINS DI): C3 Corvette, square-body C10 and LT restomods.
No separate controller box is planned: PDM2 handles the gearbox and ECU2 runs the engine. ECU2 (with the GAINS DI for LT engines) supplies the engine messages; the factory TCU keeps its shift logic.
No. The factory unit keeps its own calibration. Where an immobilizer unlock is needed, the buyer supplies an unlocked TCU from an authorized tool.
Planned capability, not a supported product. Shift control acts on engine output and is released only after bench and vehicle logs and a qualified engineering review. GM and other names identify compatible equipment only; GAINS is not affiliated with their makers.
Join the waitlist