GAINS PDM2 · Gearboxes · 6R80

Ford · Automatic

6R80 standalone controller for Ford Coyote 5.0 Gen 1 and Gen 2 swaps

Six speeds behind a Coyote. PDM2's eight current-controlled solenoid channels are sized for direct control, with CAN to the factory TCU as the alternative.

ControlDirect control
StatusPlanned · v1 target
Gears6
Also called6R80E, 6R80 Coyote
Direct control

What PDM2 runs.

PDM2 drives the shift, pressure and converter solenoids itself and reads the speed sensors, range switch and fluid temperature.

  • Seven to eight linear solenoids with closed-loop current control
  • Turbine, intermediate and output speed sensors
  • Range sensor and fluid temperature
  • Or: CAN to the factory TCU instead of direct drive

With ECU2

ECU2 supplies torque and throttle. Upshift torque cut and downshift blip come from ECU2 over the GAINS CAN link, so shifts are timed to the engine, not guessed.

FAQ
Can the GAINS PDM2 control a 6R80?

It is planned (v1 target). PDM2 drives the shift, pressure and converter solenoids itself and reads the speed sensors, range switch and fluid temperature. Nothing is supported until bench and vehicle logs and an engineering review are done.

Which swaps use the 6R80?

Ford Coyote 5.0 Gen 1 and Gen 2: Fox and SN95 Mustangs, F-100, Bronco, Ranger and restomods.

Does it need a separate transmission controller?

No separate controller box is planned: PDM2 handles the gearbox and ECU2 runs the engine. ECU2 supplies torque and throttle. Upshift torque cut and downshift blip come from ECU2 over the GAINS CAN link, so shifts are timed to the engine, not guessed.

Related gearboxes

Planned capability, not a supported product. Shift control acts on engine output and is released only after bench and vehicle logs and a qualified engineering review. Ford and other names identify compatible equipment only; GAINS is not affiliated with their makers.

Join the waitlist