With ECU2
ECU2 supplies torque and throttle. Upshift torque cut and downshift blip come from ECU2 over the GAINS CAN link, so shifts are timed to the engine, not guessed.
GAINS PDM2 · Gearboxes · 4R70W
Ford · AutomaticFord's electronic four-speed for Mod-motor and budget Coyote swaps. PDM2 is planned to run it directly.
Ford Mustang, F-150, Crown Victoria and Mod-motor cars from 1993 on.
| Ford 4.6 / 5.4 Modular and Coyote 5.0 | Fox and SN95 Mustangs, F-100 and Bronco builds |
|---|
Swap guides that use the 4R70W:
PDM2 drives the shift, pressure and converter solenoids itself and reads the speed sensors, range switch and fluid temperature.
ECU2 supplies torque and throttle. Upshift torque cut and downshift blip come from ECU2 over the GAINS CAN link, so shifts are timed to the engine, not guessed.
It is planned (v1 target). PDM2 drives the shift, pressure and converter solenoids itself and reads the speed sensors, range switch and fluid temperature. Nothing is supported until bench and vehicle logs and an engineering review are done.
Ford 4.6 / 5.4 Modular and Coyote 5.0: Fox and SN95 Mustangs, F-100 and Bronco builds.
No separate controller box is planned: PDM2 handles the gearbox and ECU2 runs the engine. ECU2 supplies torque and throttle. Upshift torque cut and downshift blip come from ECU2 over the GAINS CAN link, so shifts are timed to the engine, not guessed.
Planned capability, not a supported product. Shift control acts on engine output and is released only after bench and vehicle logs and a qualified engineering review. Ford and other names identify compatible equipment only; GAINS is not affiliated with their makers.
Join the waitlist